Latest acsr wire Tenders | Government acsr wire Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

State Government

CTN :45701688

06 Jul, 2026 NA

Aurangabad(Bh) - Bihar

Tender For short tender notice for purchase and supply of laboratory equipment in different colleges in aurangabad. - district planning office, aurangabad. - arc indicator medium, carry foster bridge, camera lucida mirror type, bar pendulum tron, bending of beem app, boyle law app double and routine, dynmo model ac/dc superior qulity, double incline planl teak wood, inertia table app, incline plane 4" aluminum arc, k-constant spring app. alum scale, hook 5 law app big size 12" glass, jagger app complete, logic gate, maxwell vibration needle brass, mew app, model of bio gas plant, model of newton law of cooling universty, post office box brass, reading telescopee, , tangent glavanometer bras deluxe, surface tension app, searle app brass, screw guage(25mm), ring ball app, pin hole camera, newton second law, newton first law, model of wind mill, model of traffic light signal controller, model of solar system electric, model of phase of moon, model of newton colur disk, model of four stroke petrol engine, hydero power turbine, gold leaf electroscope, fraction board app, electric bell, electric, 29 newton third law, spectrometer, comutatr, tunning forks (original), high resistance coil 10ohms, connecting wires, wooden stands v-shape, wooden screens black and white, geometry boxes 1 big), deflection of sound, resistance boxes 500 ohms, meter bridge, p-n junctions diode kit, plug keys (two-way), magnetic needles, tangent galvano meter, digital multi meter(superior), bar magnets(4 inches), transistor characteristics, spring constant apparatus, battery eliminator, 12volts, ammeter, volt meter, object stand of wire mesh, haguer app, galvanometer, specific gravity bottles 25ml b/s/g), soldering gun gum, lead wire, velocity of sound in air apparatus, stop clocks, magnetometer compass, copper calorimeter, tripod stands, 6x4, rheostat, 8" brass, potential meter, manganese wire, nichrome wire, soldering lead, weighing machine, resistance wire, filterpapers, ohm's law apparatus, solar cell, zenor diode app, spring balance tubuler, potestion meter 10 wire, physcis chart set of 15, three kinds of levers, pulleys (simple machines), dynamo (hindi-english), refraction of light by a prism [hindi-english, petrol engine, the steam engine, pascal's law, newton's laws of motion, light (hindi-english), refraction of light, archimedes principle, reflection of light from mirror, refraction of light through lenses, heat & temperature, sound, chemistry, test tube-15 x125 mm, borosil, glass, watch glass-3"dia, burette-50ml-screw type stop cock, borosili, conical flask-250ml-borosil glass, pipetto-20ml with one mark borosil class, measuring cylinder (100nil) with spilt cork-, borosil glass, retort stand plastic with clamp, reagent bottle-250ml, narrow mouth, indi glass borosil, reagent bottle-125ml, indian glass, narro mouth borosil, test tube-25 x 150 mm (boiling, tube) borosil, atomic model senior polylab, compound microscope- with 2 eye pleces. obj.(151), brush no "0", dissection needles, beaker-250ml-plastic, petri dish 4" dia, imported borosil glass, petri dish-polythene-4" dia, cork borer set-set of 6 sizes, brass, regular, rubber cork-one holed, cover slips-pack, filter paper-sheets, dessicator-6" dia, indian glass, with lid, chromatogrphy paper-sheets, mortar & pestle-set, porcelene, test tube stands (plastic), ipps app 500 ml plastic, model of crystel,, model of grafid, model of dimond, sprit limp s.s, bunsen surener with stop cork, gas tape 2 way, rubber cork mix, spatula 6 ss, flask round bottam 250 ml borosil, flask round bottam 500 mi borosil, flask flat bottam 250 ml borois!, falsk flat bottam 500 ml borois!, flask volumetric 250 ml borosil, beaker 250 ml boroisl, beaker 500 ml borosil, funnel 3" borosil, thisel funnel 12", cavity slide 2 cavity, rubber tubing, magnesium ribbon, gas jar 6x2 plastic, capillary tubes packet, thermo meters lab, chemistry chemical, manganese dioxide 500 gm, barium chloride 500 gm, ferric chloride 500 gm, silver nitrate

State Government

CTN :45705912

30 Jun, 2026 NA

Gohana - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,manhole chambers providing and fixing sfrc manhole covers and frames marked with is: 12592 including setting the same to correct lines and levels in 1:3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the engineer-in-charge. 1. type:- extra heavy duty set (ehd-35) 560mm clear opening, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soil ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) .,steel reinforcement steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level note: reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. thermo-mechanically treated bars of grade fe-500d or more,brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 1. cement mortar 1:4 (1 cement : 4 coarse sand)

State Government

CTN :45693816

23 Jul, 2026 NA

Panchkula - Haryana

Tender For purchase of machinery/equipment for electrical trade for up-gradation of govt. quality marketing centre faridabad under trade infrastructure for export scheme(ties). - purchase of machinery/equipment for electrical trade for up-gradation of govt. quality marketing centre, faridabad under trade infrastructure for export scheme(ties)., salt spray chamber, digit mega ohm meter (0-250-500-1000-2500-5000 v selectable), glow wire test apparatus (test temp. range: 0-950 c selectable), kelvin double bridge (with accessories 1 dc source 2 spto reflecting galvanometer, digital), oxygen index test set, smoke density test apparatus, torsion test apparatus, digital optical measuring system (advanced vision system for dimension measurement)testing sample ranger 0-150 mm along with:-, insulation resistance tester-5kv, high voltage test set-2 kv dc, micro ohm meter-0-20 k ohm, ac breakdown tester-100 kv ac, universal bending compression tensile test 5 kn

CTN :45690696

04 Jul, 2026 NA

Delhi - Delhi

Tender For supply of 4 core 50 sqmm cable , bulb 9 watt , hanging holder , multiple socket board , top 5 amp , 15 amp two way switch , change over 200 amp , flexible wire , 1 inch pipe for drone obstacle , 1.25 inch pipe for drone obstacle , 1 inch round for drone obstacle , pipe bending for drone obstacle , nut bolt for drone obstacle

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

State Government

CTN :45646844

01 Jul, 2026 1.89 Lacs

Thrissur - Kerala

Tender For supply of solar fencing materials to tool room at mannamangalam forest station in pattikkad range during 2026-27 - energiser with 10kv output saftey standards with bis 302-2-76 iec 335-2-76, switch high-medium-low power setting. solar panel option to recharge 12v battery, full and reduced power output terminals operate different fences independently, supply of corner post assembly -. 8 ft, gi 2, 14 guage thickness, 50nv class b pipe -hot dip galvanized to more than 60 microns-must include fasteners- including cost of gi pipe, painting, supply of supporting posts 8 ft gi-1, 14 guage thickness 50 nv class b pipe -hot dip galvanized to more than 60 microns-must include fasteners- including cost of gi pipe, painting, intermediate posts;8 ft (25mmx25mmx3mm) insulated t post or 16mm tmt rod hot dip galvanized more than 60 microns, including cost of t post, strain insulator -must of polypropelene plastic rated for 15 kv, uv stabilized, pp reel insulator - must be of virgin plastic material polypropelene or equivalent., wire tightener -in suit tightners for proper tensioning of wires should be made from al alloy-non rusting quality mechanical strength 500n., battery water, supply of 12 guage acsr wire;12 guage 2.5mm wire dia high tensile wire with minimum of 230-300gms/sq.m zinc coated thickness. uts 140.5 kg/mm2, break strength of 740kgs, zn purity above 99%

State Government

CTN :45646908

01 Jul, 2026 1.89 Lacs

Thrissur - Kerala

Tender For supply of solar fencing materials to tool room at pattikkad forest station in pattikkad range during 2026-27 - energiser with 10kv output saftey standards with bis 302-2-76 iec 335-2-76, switch high-medium-low power setting. solar panel option to recharge 12v battery, full and reduced power output terminals operate different fences independently, supply of corner post assembly -. 8 ft, gi 2, 14 guage thickness, 50nv class b pipe -hot dip galvanized to more than 60 microns-must include fasteners- including cost of gi pipe, painting, supply of supporting posts 8 ft gi-1, 14 guage thickness 50 nv class b pipe -hot dip galvanized to more than 60 microns-must include fasteners- including cost of gi pipe, painting, intermediate posts;8 ft (25mmx25mmx3mm) insulated t post or 16mm tmt rod hot dip galvanized more than 60 microns, including cost of t post, strain insulator -must of polypropelene plastic rated for 15 kv, uv stabilized, pp reel insulator - must be of virgin plastic material polypropelene or equivalent., wire tightener -in suit tightners for proper tensioning of wires should be made from al alloy-non rusting quality mechanical strength 500n., battery water, supply of 12 guage acsr wire;12 guage 2.5mm wire dia high tensile wire with minimum of 230-300gms/sq.m zinc coated thickness. uts 140.5 kg/mm2, break strength of 740kgs, zn purity above 99%

State Government

CTN :45586913

17 Jul, 2026 3.72 Crore

Ambala - Haryana

Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibre optic cable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

State Government

CTN :45587085

17 Jul, 2026 5.08 Crore

Ambala - Haryana

Tender For tender for supply of raising height of transmission line -earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7 a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric type t_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge lumsum n_s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns square or rectangular or polygonal in plain ref no. 9.4 of pb csr2020 , reinforced cement concrete m-20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30degree-60degree bx__36m , m60-3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , design , testing , fabrication , supply , erection including foundation of 220 kv monpole pd 30degree_60degree bxa_24m , m56_2500lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc.complete in all respect. , cpri vetting charges of monopoles , supply of stubs of 220kv m_c tower type nmd krr design weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg , supply of tower body including extension of 220kv m_c tower type nmd plus 6 mtr. extn. krr design weight 18905.99 kg ht and 11081.5 kg ms ncluding gi nuts and bolts weight 1316.41 kg , supply of stub template suitaible for 220kv m/c tower type nmd plus 6 mtr. extn. krr design weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , circuit plate set of 2 , anti climbing device acd with concertrina wire , acsr conductor zebra 0.4 sq inch copper eq. , earth wire 7_3.15mm , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , single tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , single tension hardware fitting suitaible for earth wire size 7_3.15mm , straight joint for earth wire size 7_3.15mm , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for earth wire size 7_3.15mm , bird guard set of 3 , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , erection of towers , stringing and sagging of conductors , earth wire and accessories , including tack welding of bolts (about 750 bolts) complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

Acsr Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors