Web Analytics Made Easy - StatCounter

Aggregate Course Tenders

Get complete information related to latest Aggregate Course Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aggregate Course Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aggregate Course Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45416190 Due date: 11 Jun, 202611 Jun, 2026 30.00 Lacs
Tender For ananganadi grama panchayath ,vendor selection for supply of various mterials for mgnregs - quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, fine sand (zone iv), coarse sand (zone iii), gravel 5mm to 10mm, stone for masonry work, portland cement, m.s. tube 40 mm dia, mild steel tubes hot finished welded type, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel sheets with bolts and nuts to rest on pintels, iron pintels including weldded pin, mild steel sheets for tanks, mild steel hooks, mild steel plate, mild steel tubes electric resistant or induction butt welded, welding by electric plant, wire nails, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, flats up to 10 mm in thickness, galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm, g.i trafford profile sheet 0.35mm thick, precoated aluminium traffored sheet 0.450 mm thick, structural steel such as tees,angles,channels and rs joists, stainless steel screws 50 mm, red oxide zinc chromate primer, precoated galvanised steel plain ridges, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates, g.i pipe 40mm dia, gi plain washer thick, twisted steel/deformed bars, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charge of 10 hp engine and pump set - materials, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, solid blocks of size 30x20x20cm, solid blocks of size 30x20x15cm, hollow blok of size 40x20x10cm, interlocking c.c. paver block (80 mm thick, m-30), pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, pvc pipe 63 mm outer dia . 4kgf/cm2, pvc pipe 32 mm outer dia 6kgf/cm2, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm2, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc pipe 160 mm outer dia. 4kgf/cm2, pvc elbow 75 mm dia, pvc 45 degree elbow 75 mm dia, pvc socket/coupling 75 mm dia, pvc reducer 63x50 mm dia, pvc vent cowl 75 mm dia, vitreous china orrisa type w.c. pan size 580 mm, brass stop-cock 15 mm dia, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type water closet, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, c.i. bracket for wash basin and sinks, polyethylene water storage tank with cove

CTN :45224098 Due date: 10 Jun, 202610 Jun, 2026 NA
Tender For corrigendum : supply of supply of gravel granular gsb 250mm 125mm low grade aggregates , supply of geo textile of size 4 point 5mtr x 100rm over gsb with min 300mm stone aggregate as in drain , supply of geo grid of size 4 point 5mtr width x 100rm below gsb with min 300mm stone aggregate as in drain , opc 53 grade cement , sand for coping , aggregate 20mm , supply only fine sand , supply only water based prepolymer urethane , supply of paver block siz 225mm x112 point 5mm x100mm , rubber hammer , brick trawel , pan mortar std size , hand gloves rubber , digital compression testing machine , spacer clips , special mask for chemical laying , wire mess for seiving sand 8 feet x 5 feet , phawrah with handle make , measuring tape 5 m ai 16 , water level pipe 30mtr roll , mason thread 100 mtr long roll , sprit level 10 inch , broom sticks , concrete saw electric

CTN :45318395 Due date: 16 Jun, 202616 Jun, 2026 66.42 Lacs
Tender For supply of double stranded nylon mesh panel with accessories of size 2250mm x 3000mm as per tech spec att , quick setting compound rapidite as per approved sample and make and is 9103 of 1999 make pidilite or dr fixit , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded conforming to is-383of 2016 , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded conforming to is-383 of 2016 , ms binding wire annealed not less than 0.9mm dia confirming to is-280 of 2006. , natural sand conforming to is-383 of 2016 specifications for coarse and fine aggregates. , screen post type mild steel circular hollow material ms steel tube conforming to is 1161 of 2014 dimensions 42.4mm od, 4.05mm thickness length 6000 mm as per tech spec att , screen post socket type mild steel circular hollow material ms steel tube conforming to is 1161 of 2014 dimensions 48.30mm od, 4.05mm thickness length 750 mm as per tech spec att , gi j hooks of size 90mm x 5mm for hanging nylon rope as per is-730 of 1978 , wire cutter 450mm length made of high grade chrome vanadium steel conforming to is- 5200 of 1998 , hand gloves leather 500g neatly stitched with elastic wrist and inner cotton lining of various sizes having min tear strength of 25 n , hammer sledge 1.81kgs made of high carbon steel hardened for durability conforming to is-841 of 1983 , steel gurmala or planer along with wooden handle and steel plate of 1.5mm thickness. plate of size 230 x 100mm conforming to is-1630 of 1984 , cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles conforming to is- 2615 of 1989 and is- 3650 of 1981. , shovel of 5mm thickness with a wooden handle, made of high quality carbon steel and wt should be approx 2kgs conforming to is-274 of part 1 and 2 of 1981 , trowel mason brick or carandy made of stainless steel with wooden handle conforming to is-1630 of 1984 , measuring tape 30 m made of glass fibre nabc credited and pvc coated with fibre glass yarn conforming to is-1269-2 of 1997 , picks axes with chiesel and pointed ends is- 273 of 1990 , tasla iron 18 inch dia and made of galvanised iron and wt of 500gms. wide rim design with curved edges for easy handling and mtrl transfer as per is-1630 of 1984 , fawada of size 150 x 275mm made of high tempered iron or mild steel with wooden handle. , crow bar 5 ft long wt of 5kgs and edge width of 25mm conforming to is-704 of 1984 //bid details 2 / 27

CTN :45276203 Due date: 06 Jun, 202606 Jun, 2026 10.00 Lacs
Tender For supply work of construction/maintenance and other material under nagar parishad shahpura (fy-2026-2027) 2nd call - bricks (open bhatta) , bricks (fly ash) , steel i section all size isi mark, chain link fencing, , shutring & centring, angle iron all size (all complete), paver block 60 mm m-30 reflactive rubber moulded with laying, paver block 80 mm m-30 reflactive rubber moulded, r.c.c. hume pipe np-2 300mm dia., r.c.c. hume pipe np-2 450mm dia., r.c.c. hume pipe np-2 600mm dia., r.c.c. hume pipe np-2 1000mm dia., r.c.c. hume pipe np-2 1200mm dia., birla white putty isi specification (all complete), oil bound distemper isi specification (all complete), , , interior emulsion paint isi specification (all complete), distemper isi specification (all complete), kota stone (all complete), latrine seat 580mm, camod, urine pet (men & women), concrete work m-10 (all complete), concrete work m-20 (all complete), floor & wall 1st (all complete), floor & wall 2nd (all complete), floor & wall high glowing tiles (all complete), (all complete), (all complete), (isi) 500 , (isi) 1000 , paint (isi) all complete, 50 mm (heavy) (all complete), 1 (all complete), 1.5 (all complete), 2 (all complete), , , ( ) , ( ) , (isi) ( ), wall painting (slogan), wall painting ( ), , ( ), tree guard (6 , 2 ), febrication work ( ), febrication work ( isi), pvc pipe(4inch), putti, fall silling work, net (work), lighting(all work), window, glass, electric bords, sand, ordinary portland cement 53,43 grade (isi mark), steel bar all size upto 25 mm mild and torr steel, tiles, paver block, ppc cement, rapid hardening cement, mass concrete cement, vinyle sheet floor mat, , 40mm over size metal , 10mm over size metal , 6mm over size metal , crusher stone dust , sand, fine grain particales, silt, soil, boulder, sand stone, gravel

State Government

CTN :45130447 Due date: 02 Jun, 202602 Jun, 2026 3.00 Lacs
Tender For supply of construction items at sub jail seondha - cement bag (50 kg), brick, sand (masonry/plaster), gravel (12 mm), gravel (20 mm), fine gravel (jira), square iron pipe (various sizes), iron rebar (various sizes), iron angle (various sizes), profile sheet (various sizes), white cement (50 kg), putty, mason's daily rate, unskilled laborer's daily rate

State Government

CTN :45158948 Due date: 28 May, 202628 May, 2026 10.00 Lacs
Tender For supply of miscellaneous items - photocopy paper a4 , photocopy paper a3 , glossy paper a4 , toner refilling , t-shaped pins (packet) , large green laces , white tags , cello tape , stapler pins no. 10 , stapler pins no. 24/6 , fevicol (adhesive) , register (1 quire) , register (2 quires) , register (3 quires) , register (4 quires) , cash book mptc 05 (200 pages) , contingent register mptc 32 , ballpoint pens (blue) , ballpoint pens (red) , ballpoint pens (black) , rechargeable led bulb (9 watt) , rechargeable led bulb (12 watt) , rechargeable led bulb (15 watt) , led halogen light (50 watt) , led halogen light (75 watt) , led halogen light (100 watt) , copper wire bundle (1 mm) , copper wire bundle (1.5 mm) , ceiling fan (copper winding) - 48 inch / 1200mm , rechargeable torch , flour mill stone set (16 inch) , flour mill shaft , dough kneading machine shaft , dough kneading machine belt , pvc pipe (4 inch) , cpvc pipe (1 inch) , g.i. (galvanized iron) 1-inch pipe , galvanized corrugated sheet , color-coated sheet (profile sheet) , tmt iron rebars (various sizes) , iron angles (various sizes) , square/rectangular iron pipes (various sizes) , round iron pipes (various sizes) , t-shaped iron pipes (various sizes) , latrine pan with trap (indian style) , latrine pan with trap (western style) , cement (50 kg bag) - 53 grade , burnt clay bricks (4x8 inches) , fly ash bricks (4x8 inches) , coarse sand , fine sand , gravel/crushed stone , washed stone chips , murram (red laterite soil) , taps/faucets (various sizes) , t-joints (various sizes) , elbows (various sizes) , pipe solvent , switchboards (various sizes) , switches (various amperages) , power plugs (various amperages) , mosquito mesh (stainless steel) , wooden battens , nails (various sizes) , ht star screws , cast iron pipes (4-inch) , cast iron elbows , cast iron tees , welding rods , sintex water tank - 3-layer, 500 liters , sintex water tank - 3-layer, 1000 liters , damp-proofing compound , aluminum section partitioning (material included) , false ceiling (material included) , steel almirah , iron rack , paint roller , trimmer condenser fan , aa batteries , 3-phase cable , telephone set , telephone cable , telephone set (with caller id) , kota stone (in various sizes) , glazed tiles (in various sizes) , vitrified tiles (in various sizes) , brass valve (1½ inch) , brass valve (1 inch) , brass valve (½ inch) , brass valve (2 inch) , pvc valve (2 inch) , pvc valve (1½ inch) , pvc valve (1 inch) , pvc valve (½ inch) , led tube light (20 watt) , led tube light (40 watt) , led tube light (15 watt) , putty , distemper , grease , gas pipe (copper) — 5 feet , gas pipe (copper) — 3 feet , gas pipe (rubber) — 5 feet , gas pipe (rubber) — 3 feet , gas regulator , gas burner (long) — 4 feet , gas burner (round, large) , gas burner (round, medium) , gas burner (round, small) , electrical cable (2-phase) — in various sizes , electrical cable (3-phase) — in various sizes , mcb (2-phase) , mcb (3-phase) , rccb (3-pole) , rccb 03 poles , cast pipe (8-inch) , cast elbow (8-inch) , cast tee (8-inch) , cast pipe (12-inch) , cast elbow (12-inch) , cast tee (12-inch) , wall fan , steel welding rod , brass welding rod , pvc elbow (2-inch) , pvc elbow (1½-inch) , pvc elbow (1-inch) , pvc elbow (½-inch)

State Government

CTN :44959654 Due date: 30 Apr, 202630 Apr, 2026 1.00 Crore
Tender For close graded gsb material as pert table\400.a , aggregates 45 mm to 2.8mm , , aggregates 6 mm nominal size , , stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. , , cost of water , , ghadla kankar/jhajhra , , mud masala , , lime from bud kiln for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand gravel , , gravel - local , , rakhi (fly ash) , , surkhi , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , cut 40mm measuring stone wads (hand-broken grit 1/11) , , 40mm stone brittle (crushed) (cut voids 1/11) , , 20mm stone brittle (crushed) , , 12/10/6mm stone prints (crushed) , , brick mortar , , material for road work (5 km (including lead)) , , 63-40 mm crusher broken stone crushed (cut voids 1/11) , , 63-40 mm hand-broken stone aggregate (cut voids 1/11) , , 90-45 mm hand-broken stone aggregate (cut voids 1/11) , , quarry rubbish (cut the voids 1/6) , , gravel (voids cut 1/6) , , conker (cut voids 1/6) , , binding material (im 4-6) (cut voids 1/6) , , it (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / khareja / masonry stone , , chinai beradda (rr) , , masonry rubble (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road kharanja work) , , jodhpuri type stone slabs/bows/slabs (length 2-3", width 10-12", thickness 2.5-3.5") , , flaky material (3-4" thick & length and width 1-2") , , sandstone (dpc, sill, coping, lintel, tand, almirha etc.) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , floor slabs upto 35mm thick, min. 3 sqft or more area , , katla for patti patan 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , up to 900 sq cm , , up to 300 sq cm , , more than 2300 sq cm , , marchat chips , , martha powder , , marbat stone (rajnagar quality local 20 thick) , , 401 to 2000 sq cm , , up to 900 sq cm , , more than 2300 sq cm , , paler frame , , ekat paitam size 100 x 15 mm. , , paitam size 125 x 75 , , stone slabs , , upto 1.5 mg , , 1.5 to 2.40 m length , , 24m 10.30 m lagrick , , above 3.0 m length, mick , , precast tiles/makes , , glared size 300045 cm , , mosaic site-40thick , , virified size-60 , , interlock tie brick/block for road work , , cenost interlocking block m-30grade, 6 thick , , consent intarlocking block m-3lgrade, thick , , consent itarlocking block m-30grade, 100thick , , isi marked of frp insulated copper conductor compatible core , , 1.50 mm , , 1.00 pm , , local wood may fittingsha (for door and window furniture) , , factory made crackers (30 thick solid core single leaves) , , iron (tor rahit 1415500 rest , , widening vapor 18 gauge , , iron guard , , konia lohachoker saria leafy apple , , barbed iron wire (sine 12 gauge wire and 12 gange strad/12 guage wine and 14 gauge strad 14 ago , , iron species (24 or 14 pieces) , , cement concrete lattice sky patal 40mm thick , , 3mm thick glass , , complexion belly , , award winning paint , , disstep (water bound) , , for roasting (aras/kali) , , primer for iron rods , , gi sheet, mm thick , , g.i. sheet 22 gauge 0.80 m.m.) , , rustus cement mother 6m(2.5/2.75x1m) , , other posts , , pvc sheet thick (plain colour) , , green yellow literoof expo baddar (183090) , , pipe , , gi 15 mm diameter class) , , g.i. 20mm diameter b class) , , gi 25 mm diameter class) , , ac 19 mm diameter , , ac 100mm diameter , , pvc 90 mm diameter (including ring) , , pvc 110 mm diameter (including ring) , , pvc 140 mm diameter (including ring) , , p.c. 110 mm (2.5 kg/s) with coupler , , indian w.c. , , orrisa w.c. , , european w.c , , foot re , , the urinal was 430*350*300mm in size. waste pipe , , stone screw pipe 100mm. m samba , , cp pitar kaal (a 15 mm) (s mark , , p dib kak155 mak , , 125 mm diameter pipe , , aarti is our pipe and we are

State Government

CTN :44950186 Due date: 01 May, 202601 May, 2026 50.00 Lacs
Tender For close graded gsb material as pert table\400.a , aggregates 45 mm to 2.8mm , , aggregates 6 mm nominal size , , stone crusher dust finer than 3mm with not more than 10% passing , , 0.075 sieve. , , cost of water , , ghadla/kakar/jhajhra , , mortar/mud mixture , , kali kiln lime for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel - local , , rakhi (fly ash) , , happy , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand-broken grit) (cut voids 1/11) , , , , 40mm grit stone (crushed) (cut voids 1/11) , , 20mm grit stone (crushed) , , , , 12/10/6mm grit stone (crushed) , , , , brick chips , , road work material (5 km, including lead) , , , , 63-40 mm crusher broken stone crushed (cut voids 1/11) , , 263-40 mm hand-broken stone aggregate (cut voids 1/11) , , , , 90-45 mm hand-broken stone aggregate (cut voids 1/11) , , , , quarry rubbish (cut the voids 1/6) , , gravel (voids cart 1/6) , , conker (cut voids 1/6) , , binding material (pi4-6) (cut voids 1/6") , , brick (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / kharanja / masonry stone , , chinnai berdha (rr) , , masonry rubble (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5") , , stone chips (flaky material) (3-4" thick & length and width 1-2" sandstone (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , floor slabs upto 35mm thick, min. 3 sqft or more area , , katla for patti patan 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , polished kota stone (one side polished) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble stone (makrana adanga 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble chips , , marble powder , , marble stone (rajnagar || quality/local 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , stone frame , , single patam size 100 x 75 mm. , , double paitam size 125 x 75 mm. , , stone slabs , , jp to 1.5 m length, minimum 40mm thick , , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , above 3.0 m length, minimum 75mm thick , , precast tiles / blocks , , glazed size-30x45 cm , , mosaic size-40mm thick , , vitrified size-60x60 cm , , nterlock tiles/brick/block for road work , , cement interlocking block m-30grade, 60mm thick , , cement interlocking block m-30grade, 80mm thick , , cement interlocking block m-30grade, 100mm thick , , fr pvc insulated copper conductor single core cable isi marked , , local wood with fittings (for doors, windows and furniture) , , mango , , acacia , , other , , factory made doors (30 mm thick, solid core single pane) , , structural steel , , iron (or steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron/squared bar/patti/angle iron , , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron mesh (24 gauge, 14 mesh) , , cement concrete lattice sky patal 40mm thick , , glass , , -3mm thick glass , , color paint , , inamil paint , , 2 distemper (water bound) , , 3 lime - for ptai (aaras/kali) , , 4 primer (for iron/wood) , , 3 petroleum products , , 1 diesel hsd , , 2 mobil oil , , 3 bitumen shalitax board (25 mm thick) , , 4 plain sheets , , 1 gi sheet 22 gauge (0.80 mm) , , 2 gi sheet 24 gauge (0.63 mm) , , 3 ms sheet 22 gauge (0.80 mm) , , 4 ms sheets 24 gauge (0.63 mm) , , 5 corrugated sheets , , 1 gi sheet 1 mm thick

State Government

CTN :44950241 Due date: 04 May, 202604 May, 2026 50.00 Lacs
Tender For close graded gsb material as pert table\400.a , aggregates 45 mm to 2.8mm , , aggregates 6 mm nominal size , , stone crusher dust finer than 3mm with not more than 10% passing , , 0.075 sieve. , , cost of water , , ghadla/kakar/jhajhra , , mortar/mud mixture , , kali kiln lime for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel - local , , rakhi (fly ash) , , happy , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand-broken grit) (cut voids 1/11) , , , , 40mm grit stone (crushed) (cut voids 1/11) , , 20mm grit stone (crushed) , , , , 12/10/6mm grit stone (crushed) , , , , brick chips , , road work material (5 km, including lead) , , , , 63-40 mm crusher broken stone crushed (cut voids 1/11) , , 263-40 mm hand-broken stone aggregate (cut voids 1/11) , , , , 90-45 mm hand-broken stone aggregate (cut voids 1/11) , , , , quarry rubbish (cut the voids 1/6) , , gravel (voids cart 1/6) , , conker (cut voids 1/6) , , binding material (pi4-6) (cut voids 1/6") , , brick (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / kharanja / masonry stone , , chinnai berdha (rr) , , masonry rubble (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5") , , stone chips (flaky material) (3-4" thick & length and width 1-2" sandstone (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , floor slabs upto 35mm thick, min. 3 sqft or more area , , katla for patti patan 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , polished kota stone (one side polished) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble stone (makrana adanga 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble chips , , marble powder , , marble stone (rajnagar || quality/local 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , stone frame , , single patam size 100 x 75 mm. , , double paitam size 125 x 75 mm. , , stone slabs , , jp to 1.5 m length, minimum 40mm thick , , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , above 3.0 m length, minimum 75mm thick , , precast tiles / blocks , , glazed size-30x45 cm , , mosaic size-40mm thick , , vitrified size-60x60 cm , , nterlock tiles/brick/block for road work , , cement interlocking block m-30grade, 60mm thick , , cement interlocking block m-30grade, 80mm thick , , cement interlocking block m-30grade, 100mm thick , , fr pvc insulated copper conductor single core cable isi marked , , local wood with fittings (for doors, windows and furniture) , , mango , , acacia , , other , , factory made doors (30 mm thick, solid core single pane) , , structural steel , , iron (or steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron/squared bar/patti/angle iron , , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron mesh (24 gauge, 14 mesh) , , cement concrete lattice sky patal 40mm thick , , glass , , -3mm thick glass , , color paint , , inamil paint , , 2 distemper (water bound) , , 3 lime - for ptai (aaras/kali) , , 4 primer (for iron/wood) , , 3 petroleum products , , 1 diesel hsd , , 2 mobil oil , , 3 bitumen shalitax board (25 mm thick) , , 4 plain sheets , , 1 gi sheet 22 gauge (0.80 mm) , , 2 gi sheet 24 gauge (0.63 mm) , , 3 ms sheet 22 gauge (0.80 mm) , , 4 ms sheets 24 gauge (0.63 mm) , , 5 corrugated sheets , , 1 gi sheet 1 mm thick

State Government

CTN :44950243 Due date: 04 May, 202604 May, 2026 60.00 Lacs
Tender For close graded gsb material as pert table\400.a , aggregates 45 mm to 2.8mm , , aggregates 6 mm nominal size , , stone crusher dust finer than 3mm with not more than 10% passing , , 0.075 sieve. , , cost of water , , ghadla/kakar/jhajhra , , mortar/mud mixture , , kali kiln lime for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand/gravel , , gravel - local , , rakhi (fly ash) , , happy , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , 40mm measuring stone (hand-broken grit) (cut voids 1/11) , , , , 40mm grit stone (crushed) (cut voids 1/11) , , 20mm grit stone (crushed) , , , , 12/10/6mm grit stone (crushed) , , , , brick chips , , road work material (5 km, including lead) , , , , 63-40 mm crusher broken stone crushed (cut voids 1/11) , , 263-40 mm hand-broken stone aggregate (cut voids 1/11) , , , , 90-45 mm hand-broken stone aggregate (cut voids 1/11) , , , , quarry rubbish (cut the voids 1/6) , , gravel (voids cart 1/6) , , conker (cut voids 1/6) , , binding material (pi4-6) (cut voids 1/6") , , brick (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / kharanja / masonry stone , , chinnai berdha (rr) , , masonry rubble (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road/kharanja work) , , jodhpuri type stone slabs/arches/slabs (length 2-3', width 10-12", thickness 2.5-3.5") , , stone chips (flaky material) (3-4" thick & length and width 1-2" sandstone (dpc, sill, coping, lintel, tand, almirha etc) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , floor slabs upto 35mm thick, min. 3 sqft or more area , , katla for patti patan 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , polished kota stone (one side polished) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble stone (makrana adanga 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , marble chips , , marble powder , , marble stone (rajnagar || quality/local 20mm thick) , , up to 900 sq cm , , 901 to 2300 sq cm , , more than 2300 sq cm , , stone frame , , single patam size 100 x 75 mm. , , double paitam size 125 x 75 mm. , , stone slabs , , jp to 1.5 m length, minimum 40mm thick , , 1.5 m to 2.40 m length, minimum 50mm thick , , 2.4 m to 3.0 m length, minimum 65mm thick , , above 3.0 m length, minimum 75mm thick , , precast tiles / blocks , , glazed size-30x45 cm , , mosaic size-40mm thick , , vitrified size-60x60 cm , , nterlock tiles/brick/block for road work , , cement interlocking block m-30grade, 60mm thick , , cement interlocking block m-30grade, 80mm thick , , cement interlocking block m-30grade, 100mm thick , , fr pvc insulated copper conductor single core cable isi marked , , local wood with fittings (for doors, windows and furniture) , , mango , , acacia , , other , , factory made doors (30 mm thick, solid core single pane) , , structural steel , , iron (or steel fe 415/500 for reinforcement) , , winding wire 18 gauge , , iron guard , , conical iron/squared bar/patti/angle iron , , barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage , , forged , , iron mesh (24 gauge, 14 mesh) , , cement concrete lattice sky patal 40mm thick , , glass , , -3mm thick glass , , color paint , , inamil paint , , 2 distemper (water bound) , , 3 lime - for ptai (aaras/kali) , , 4 primer (for iron/wood) , , 3 petroleum products , , 1 diesel hsd , , 2 mobil oil , , 3 bitumen shalitax board (25 mm thick) , , 4 plain sheets , , 1 gi sheet 22 gauge (0.80 mm) , , 2 gi sheet 24 gauge (0.63 mm) , , 3 ms sheet 22 gauge (0.80 mm) , , 4 ms sheets 24 gauge (0.63 mm) , , 5 corrugated sheets , , 1 gi sheet 1 mm thick
 Loading, Please wait...

Connect us via What's Up