Latest alumina insulation holder Tenders | Government alumina insulation holder Tenders

CTN :43196693

12 Jan, 2026 NA

Adra - West Bengal

Tender For supply of porcelain bracket insulator (ri 6030-1) (1050mm cd), as per specification number: ti/spc/ohe/ins/0071 (04/22).

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

Central Government/Public Sector

CTN :43143973

01 Jan, 2026 NA

Bhusawal - Maharashtra

Tender For supply of composite bracket insulator

Central Government And Public Sector

CTN :43116013

30 Dec, 2025 18.98 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For purchase of spares from the original manufacturer for 11kv vcbs (model vm12) of bhel make. - closing unit assembly, tripping unit assembly, motor cut-off limit switch assembly, mechanism shaft assembly, tripping spring assembly, closing spring set, top pole head, bottom pole head, spring charge motor 220v (ac/dc), operating coil 220v (dc), vcb support insulator ø118, panel / busbar support insulator ø75, lever for vi, drive link, d-lever assembly, centering ring, spherical rod end, spacer tube, support rod, compression spring, aux switch 16 way, emergency tripping assembly, plug & socket assembly (male + female)-32 pin (indoelectricals make), slow closing handle, motor charging handle, packer cu, flexible connection up to 1600a, bearing, rollers, dashpot, set of clips, indicator, truck nylon wheels, nylon rollers for shutter lifting, bolt for truck wheel, jaw contact assembly up to 1600a, jaw contact square cu packer, manual knob push button (red), manual knob push button (green), damping rubber pad, auxiliary rod, swing bolt, actuating arrangement, cam shaft for rack-in/out, 52c/d auxiliary bracket, vcb interphase barrier, jaw contact polycarbonate shroud up to 2500a, insulating coupler, door gasket (4.4 mtr/panel), door lock assembly, door glass, interpanel busbar smc sheet barrier, shutter arrangement, limit switch test/service, tripping lever/knob, cleat, nut, insulating screw m6x22, rear cover polyamide handle, packer (round), al spacer (round), support insulator 095, support channel, busbar screw (special), steel stud, clamp plate, packer, link plate inplace of droppers al, barrier, sealing cover, busbar joint pvc shroud, support channel round packer, earthing connection, pvc sleeve l/f 0.4x104 for 75wd busbar, pvc sleeve 38p for wiring, space heaters 75w, bolt hex m12x75-8.8, bolt hex m12x65-8.8, nut hex m12x8, washer spg-12-st, washer mcd 13-st, screw hex m8x30-8.8, washer spg-8-st, washer mcd 8.4-st, nut hex m8-8, m20 bolts for support insulator, nylon m5 screw, nylon m5 nut, screw hex m6x20-8.8, washer spg lock 5cb-6-5t, washer mcd 6.4-st, nut hex m6-8, bolt hex m16x65-8.8, washer spg lock scb 16-st, washer mcd 17-st, thol/con 220vdc thermal overload relay with power, contactor having 1nc aux. contact., dc diode plate, barrier for top fixed contact, barrier for bottom fixed contact, large barrier between ct

CTN :43118614

19 Jan, 2026 NA

Belur - Karnataka

Tender For supply of porcelain bracket insulator (ri no. 6030-1) (1050 mm cd)

Central Government/Public Sector

CTN :42976753

18 Dec, 2025 NA

Mysore - Karnataka

Tender For supply of porcelain bracket insulator

Central Government And Public Sector

CTN :42960482

22 Dec, 2025 NA

Alipurduar - West Bengal

Tender For provision of anti bird disc for prevention of bird fault in composite and porcelain insulator (stay tube, bracket tube & 9-ton insulator) & provision of anti monkey device (cylindrical arrangement) to prevent climbing of monkey over high voltage live structures (mast, portal uprights, gantry mast uprights etc.) in electrified section.

Alumina Insulation Holder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector