Latest alumina insulation holder Tenders | Government alumina insulation holder Tenders

CTN :45456950

11 Jun, 2026 4.89 Lacs

Jhunjhunu - Rajasthan

Tender For supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discom's specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure 'a' attached with this bsr , supply and fixing of lt porcelain shackle insulator as per is:1443 1979 and as per discom's standard specifications, suitable for working voltage 1100 volts including all accessories like gi hardware fittings confirming to is:7935/1975 (latest amended) nut, bolt etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure 'a' attached with this bsr75mm x 90mm

corporations/Associations/Others

CTN :45461627

29 Jun, 2026 26.99 Lacs

Limbdi - Gujarat

Tender For work of porcelain insulator water washing work for 400/220/66kv lines under am division limbdi, surendranagar circle getco.

corporations/Associations/Others

CTN :45439448

23 Jun, 2026 5.57 Lacs

Surendranagar - Gujarat

Tender For work of porcelain insulator strings water washing of various 66kv dp & tower lines under am division dhrangadhra.

CTN :45447086

15 Jun, 2026 NA

Bhaderwah - Jammu And Kashmir

Tender For fixing of rates for supply of minor spares minor stores key material equipment hardware items required from time to time for operation maintenance of distribution network during the fy 2026 27 - fixing of rate contract for supply of minor spares/minor stores/key material/equipment/hardware items required from time to time for operation/maintenance of distribution network during the fy 2026-27. - al. thimble 95 mm heavy duty (conforming isi standards), al. thimble 120 mm heavy duty (conforming isi standards), al. thimble 185 mm heavy duty (conforming isi standards), al. thimble 300 mm heavy duty (conforming isi standards), al. thimble 400 mm heavy duty (conforming isi standards), al. thimble 630 mm heavy duty (conforming isi standards), al. bus bar of sizes, bus bar insulator (conforming isi standards), 11 kv disc insulator porcelain b&s 45 kn (conforming isi standards), 11 kv disc insulator porcelain b&s 70 kn (conforming isi standards), 11 kv disc insulator porcelain t&c 45 kn (conforming isi standards), 11 kv disc insulator porcelain t&c 70 kn (conforming isi standards), 11kv disc insulator (polymeric) 45kn, t&c/b&s (conforming isi standards), 11 kv disc fittings g.i heavy duty b&s, 11 kv disc fittings g.i heavy duty t&c, 11 kv hg set (heavy duty), 11 kv la set porcelain (station type) (heavy duty) 5 ka (conforming isi standards), 11 kv la set porcelain (station type) (heavy duty) 10 ka (conforming isi standards), 11 kv la set porcelain (line type) (heavy duty) (conforming isi standards), go set with pipes complete/ galvanized (heavy duty) 9 nos.post insulator, guy insulator lt/ht (conforming isi standards), 11 kv pin insulator porcelain 10 kn (conforming isi standards), 11 kv pin insulator porcelain 5 kn (conforming isi standards), 11kv pin insulator with pin (polymeric) (conforming isi standards), gi pins 700 gms, shackle insulator 6 (conforming isi standards), 11 kv link set 16 size 50x6mmx420mm, 11 kv drop out set heavy duty, 11kv la set line type polymeric (conforming isi standards), 11kv la set station type polymeric (conforming isi standards), mccb 3 pole 63 amp (25 ka) (conforming isi standards), mccb 3 pole 100 amp (25 ka) (conforming isi standards), mccb 4 pole 100 amp (25 ka) ( conforming isi standards), mccb 3 pole 200 amp (25 ka) ( conforming isi standards), mccb 4 pole 200 amp (25 ka) ( conforming isi standards), mccb 3 pole 250 amp (25 ka) ( conforming isi standards), mccb 4 pole 250 amp (25 ka) ( conforming isi standards), mccb 3 pole 250 amp (35 ka) ( conforming isi standards), mccb 4 pole 250 amp (35 ka) ( conforming isi standards), mccb 3 pole 400 amp (36 ka) ( conforming isi standards), mccb 4 pole 400 amp (36 ka) ( conforming isi standards), mccb 4 pole 630 amp. (36ka) ( conforming isi stadards), single phase energy meter 60amp, single phase energy meter 30amp, prodigy meter (secure make), 11 kv ct/pt units of various ratios including 3-phase, 4 wire trivector meter with compatible meter box and pvc copper control cable 10 core having 10 mtr. length., 3-phase, 4 wire trivector meter (secure make), ct/pt combine unit of various ratios, meter box compatible for housing trivector meter, 3-phase, 3 wire trivector meter (secure make), 140 w led high mast light (make : syska/bajaj/havells/crompton/any other reputed company make), 120 w led high mast light (make : syska/bajaj/havells/crompton/any other reputed company make), 100 w led high mast light (make : syska/bajaj/havells/crompton/any other reputed company make), 50 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), 70 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), 90 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), 100 w led street light (make : syska/bajaj/havells/crompton/any other reputed company make), pvc multistrand wire copper 1.0 mm2, pvc multistrand wire copper 1.5 mm2, pvc multistrand wire coppe

Central Government/Public Sector

CTN :45459003

19 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98417265: cond. & u/s. porcelain insulators, composite insulators & polymer composite insulator of sorts and sizes, full/broken, with or without rubber/ferrous/non ferrous/gi and other attachments as is where is condition. note: breaking not permitted. location: right side of entrance gate, w-56 of scrap yard/ssd/ptj.

Central Government/Public Sector

CTN :45453553

15 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of porcelain bracket insulator (ri- 6030-1) (1050 mm cd) as per rdso specification no. ti/spc/ohe/ins/0071 (apr%u20192022) or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45454604

29 Jun, 2026 NA

Delhi - Delhi

Tender For supply of tensile load testing machine for porcelain and composite insulator . as per rdso spec. ti/spc/ohe/instest/0091 (08/2024). [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45427476

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr

State Government

CTN :45427478

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to improvement of distribution system of various lwss in eletrical section silh under esd hpsebl majheen, ed jawalamukhi. - supply part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, cable 3.5 x 240 sq. mm, lt distribution panel box for 250 kva dtr, aluminium thimble 240 sq mm, capacitor bank 81 kvar for 250 kva dtr, danger plate, surge arrester, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, chemical earth, aaac 7/4.26 sq. mm, chain pully 3 ton, supply part of ct-pt unit, ct pt combined unit (pt:11 kv/110 v ct: 200/5 a), 3-ph, 4-wire tri vector meter (pt - ratio -/110 v, pvc multistrand 2.5 sq mm copper wire, 1 inch dia gi pipe for concealing, bend joint/elbow, st pole 9 mtr long with base plate, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 4 nos], x-arm: [channel iron (75x40x4.8 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 1 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos, ms angle iron (50x50x6 mm), length : 2800 mm x 4 nos, ms angle iron (50x50x6 mm), length : 460 mm x 2 nos, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, aluminium paint., red oxide, erection part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection charges & transportation charges complete in all respect of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection part of ct-pt unit, erection charges & transportation charges complete in all respect of ct-pt unit

State Government

CTN :45427480

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to jsv by prov. 11/0.4 kv, 25 kva dtr at bohal khalsa a/w 11 kv ht line in electrical section bharoli under esd hpsebl no-i jawalamukhi ed jawalamukhi - supply part of 11 kv ht line with aaac 7/3.81 (0.692 km), steel tubular poles 10 mtr. long, steel tubular poles 9 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), safety & maintenance equipment for line maintenance, ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr

Alumina Insulation Holder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors