Get complete information related to latest Aluminium Reflector Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminium Reflector Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminium Reflector Tenders.
Tender For a.r. & maintenance of 196 hmps flats at south avenue under sub div-1 of ded-201, new delhi. (sh: replacement of defective electrical accessories i/c supply of material).subwork/packages:replacement of defective electrical accessories i/c supply of material. - supplying, installation, testing & commissioning of flood light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage : input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range - 5 deg. to 50 deg. centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%, thd < 10% as per iec 61000-3-2, p. f.≥0.95, ip-66, ik-10, cri >70, under voltage and over voltage protection, emiemc as per cispr -15, lenses for beam angle 30 deg- 120 deg as per the application and the project requirement deg., suitable tilt able fitting, life time (led, driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000°k/4000°k /5700°k /6500°k (as per ansi bin), sdcm(standard deviation color matching) <5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 <120 lm/watt output. lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c). (make: havells/ wipro/ philips/ crompton/ regent) 1.1 50 watt , 1.5 sq mm frls pvc insulated single core copper conductor cable., , 4 sq mm frls pvc insulated single core copper conductor cable., , 6 sq mm frls pvc insulated single core copper conductor cable., , s.p. 5/6 a, one way modular switch, , s.p. 5/6 a, two way modular switch, , s.p. 15/16 a, one way modular switch, , 3 pin 5/6 a modular socket outlet, , 6 pin 15/16 a modular socket outlet, , modular bell push, , stepped type modular fan regulator (2 module), , telephone socket outlet modular type, , t.v. socket outlet modular type, , modular blanking plate, , modular base & cover plate for 1 or 2 module, , modular base & cover plate for 3 module, modular base & cover plate for 4 module, , modular base & cover plate for 6 module, , modular base & cover plate for 8 module, , modular base & cover plate for 12 module, , modular gi box for 2 module, , modular gi box for 3 module, , modular gi box for 4 module, , modular gi box for 6 module, , modular gi box for 8 module, , modular gi box for 12 module, , 3 pole mccb, 125 a, 16ka, , 6 amps. to 32 amps. ratings, sp mcb, "c" curve, 10 ka breaking capacity, , 40 amps., 2 pole isolator, , 63 amps., 2 pole isolator, , 100amp., 4 pole isolator, , supply of led batten light (system lumen efficacy ≥105 <120 lm/watt) of following body materials. powder coated die cast /extruded aluminium body (thickness > 1.20 mm) (make: havells/ wipro/ philips/crompton/regent), , 18-22 watt, , 40 watt, , supply of led down lighter (smd type) (system lumen efficacy ≥ 105 <120 lm/watt) of following body materials. powder coated die cast/extruded aluminium body including trim with aluminiumreflector (make: havells/ wipro/ philips/ crompton/regent), , 5-7 watt, , 8-10 watt, , 12-15 watt, , supply of led bulb 9 watt b-22/e- 27 type (3 star & above) (white/yellow colour) (make: havells/ wipro/ philips/ crompton/regent), , less credit for damaged and dismantled material received from the work :-, , 5/15/16 amp. switch/socket/bell push/tv antenna socket/telephone socket/dp switch/fan regulator (assorted), , pvc
Tender For supply of wooden gun platform , triangular boards caps & cane & no mobile zone , boards for map on acp base & sun vinyl pasted on sun boards 10x8
Tender For supply of supply of bi pin halogen lamp 200w , suppy of ama make bi pin lamp holder , supply of halogen lamp with inbuilt holder , supply of epr self amalgamating ht rubber , supply of high temperature porcelain 2 way , supply of 15 watt capacity isolating transformer , supply of 45 watt capacity isolating transformer , supply of 200 watt capacity 6.6 6.6a isolating transformer , supply of 200 watt capacity 20 6.6a isolating transformer , supply of 6 sqm essna connector , supply of 16 sqm essna connector , supply of red spreader lens , supply of green spreader lens , supply of rubber gasket , supply of copper 2cx2.5 sqmm , supply of 80 watt input , supply of led aviation light , supply of aluminiumreflector
Tender For tender for supply of plumbing items/ material at rdvv, jabalpur - supply of plumbing items, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpcv pipe 1.1/4 inch, cpvc pipe 1.1/2 , cpvc pipe 2 inch, cpvc pipe 3 inch, upvc pipe inch, upvc pipe inch, upvc pipe 1 inch, upcv pipe 1.1/4 inch, upvc pipe 1.1/2 , upvc pipe 2 inch, upvc pipe 3 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4" inch, g.i. pipe inch, g. i. pipe 1 inch, g. i. pipe 2 inch, g. i. pipe 3 inch, g. i. pipe 4" inch, cpvc reducer socket inch, cpvc reducer socket inch, cpvc reducer scket 1 inch, cpcv reducer socket 1.1/4 inch, cpvc reducer socket 1.1/2 , cpvc reducer socket 2 inch, cpvc reducer socket 3 inch, upvc reducer socket inch, upvc reducer scket 1 inch, g. i. reducer socket inch, g. i. reducer scket 1 inch, cpvc reducer tee inch, cpvc reducer tee inch, cpvc reducer tee 1 inch, upvc reducer tee inch, upvc reducer tee inch, upvc reducer tee 1 inch, g. i. elbow reducer inch, g. i. elbow reducer 1 inch, g. i. elbow reducer 1.1/4 inch, g. i. elbow reducer 1.1/2 , cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc tee 1.1/4 inch, cpvc tee 1.1/2 , upvc tee inch, pvc tee 1.1/4 inch, pvc tee 1.1/2 , pvc tee 2 inch, pvc tee 3 inch, g. i. tee inch, pvc tee inch, g. i. tee 1 inch, g. i. tee 1.1/2 , cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, upvc socket inch, upvc socket inch, upvc socket 1 inch, g. i. socket inch, g. i. socket inch, g. i. socket 1 inch, g. i. socket 1.1/4 inch, g. i. socket 1.1/2 , g. i. socket 2 inch, g. i. socket 3 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, upvc elbow inch, upvc elbow inch, upvc elbow 1 inch, g. i. elbow inch, g. i. elbow inch, g. i. elbow 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, upvc union inch, upvc union inch, upvc union 1 inch, g. i. union inch, g. i. union inch, g. i. union 1 inch, g. i. union 1.1/4 inch, g. i. union 1.1/2 , g. i. union 2 inch, g. i. union 3 inch, g. i. flunch 1 inch, g. i. flunch 1.1/2 , g. i. flunch 2 inch, g. i. flunch 3 inch, nut bolt (nks lwr) 2", nut bolt (nks lwr) 3", nut bolt (nks lwr) 4", beep cog brass inch, beep cog g. i. inch, beep cog pvc inch, froot wall cog set brass (light) inch, froot wall cog set brass (light) 1 inch, froot wall cog set brass (light) 1.1/2 , gate wall brass g.i. gun metal inch, gate wall brass g.i. gun metal 1 inch, gate wall brass g.i. gun metal 1.1/2 inch, gate wall brass g.i. gun metal 2" inch, gate wall brass g.i. gun metal 2.1/2 inch, gate wall brass g.i. gun metal 3" inch, brass spendal half turn 1 no., brass spendal half turn 2 no., brass spendal half turn 3 no., brass spendal full turn 1 no., brass spendal full turn 2 no., brass spendal full turn 3 no., j. p. jointer g. i. 1 inch, j. p. jointer g. i. 1.1/2 inch, j. p. jointer g. i. 2" inch, j. p. jointer g. i. 2.1/2 inch, j. p. jointer g. i. 3" inch, piller cog steel x6 , piller cog steel x9 , piller cog steel x12 , piller cog brass x6 , piller cog brass x9 , piller cog brass x12 , pillar cog steel (2 in 1), flush tank pvc, flush saypan (waser), pvc connection x12 , pvc connection x18 , pvc connection x24 , pvc connection x36 , pvc waste pipe 1.1/4 inch, waste cupling brass 1.1/4 inch, waste cupling upvc 1.1/4 inch, waste cupling pvc 1.1/4 inch, wast cupling steel 1.1/4 inch, n.r.b. non return wall g. i. 1 inch, n.r.b. non return wall g. i. 1.1/2 inch, n.r.b. non return wall g. i. 2 inch, n.r.b. non return wall g. i. 2.1/2 inch, n.r.b. non return wall g. i. 3 inch, n.r.b. non return wall brass 1 inch, n.r.b. non return wall brass 1.1/2 inch, n.r.b. non return wall brass 2 inch, n.r.b. non return wall brass 2.1/2 inch, n.r.b. non return wall brass 3 inch, half shut bent cpvc , pvc tee with cap 1.1/2 , pvc tee with cap pvc2 , pvc tee with cap 2.1/2 , pvc tee with cap 3 , pvc tee with cap 4 , pvc elbow with cap 1.1/2 , pvc elbow with cap pvc2 , pvc elbow with cap 2.1/2 , pvc elbow with cap 3 , pvc elbow with cap 4 , pvc nahani trip 1 way, flush fitting kit pvc, sun, tef
Tender For quotation for the work of supply of helogen fixture and it accessories and led flood light at head water works, store (varachha).-500 w helogen tube ,1000 w helogen tube supplying led street light /flood light fittings with high power white leds wattage of 50 watt and assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics / lenses, with toughened glass with ratio >0.45, luminaire efficacy> 100 lumens/watt led driver efficiency > 85 %.(fittings required lm-79 & lm-80 certificates) (a) street light (ip-65), surge protection -4kv integral and light must have 440vac line supply with over-voltage protection. (cat. iii) providing indoor type halogen fitting made from m.s. sheet with aluminiumreflector and holder with 500 w halogen tube. (cat. iii) ,providing indoor type halogen fitting made from m.s. sheet with aluminiumreflector and holder with 1000 w halogen tube. (cat. iii)