Latest aluminium bar Tenders | Government aluminium bar Tenders

Central Government/Public Sector

CTN :45604809

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45732202

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system in paint shop of lower parel workshop along with complete installation of industrial air blower with movable trolley, operating voltage 190v ac to 380 v ac, 50 hz, single/three phase supply, maximum power consumption shall be less than 600 watt, maximum speed of 400 rpm, air flow of 700 meter cube per minute, weight shallbe less than 60 kg and noise shall be less than 50db. size of blower shall not be more than 1500 mm diameter confirming to is 6272-1987 or latest all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt 1) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. materiat shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt. agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45737409

08 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of bimetallic terminal connector suitable for 25 mm dia, aluminium tubular bus bar to terminal pad of 3.3 kv isolator/ct with copper palm copper cu etp cw004l and aluminium barrel aluminium al 99.5cable connector temperature resilience, corrosion resistance confirming to is: 5561-1970 with maximum temperature rise of 90 degree elsius. material shall be confirmed to designation a6 of is: 61 7-1959. breakingresistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35. (nabl certificate shall be submitted along with the offer) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743942

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45709820

20 Jul, 2026 NA

Veraval - Gujarat

Tender For supply of aluminium barrel tower bolt of dia d=10mm, size 150mm, confirming to is:204 (part 2)-1992 (5th revision) with amendment-3 of jan.-2008,type-4. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Central Government/Public Sector

CTN :45467327

04 Jul, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of aluminium bar-ams 4132 dia150+ /-4mm , aluminium bar-au2gn dia 200+ /- 6 mm

CTN :45674269

04 Jul, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of health faucet (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , towel rail (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , pvc three layer water storage tank 500 ltrs , wall mixer cp 3 way 15 mm , pvc three layer water storage tank 1000 ltrs , kitchen sink with out drain board , centre hole basin mixture cp 15 mm , pvc low level flushing cistern 10 ltr , western toilet european pattern , kitchen rack stainless steel 36 inch by 24 inch , sink mixture cp 15 mm , pvc pipe 110 mm bore , wc orissa pattern viterous china 450 by 350 mm , bib cock brass 15 mm , glass shelf 6 mm thick with cp railing , ppr pipe 25 mm , hand wash basin viterous china glazed , ppr pipe 20 mm outer diameter , 15mm brass fancy tap cp bib tap 15mm , looking mirror cabinet type 450 by 300 mm , ppr gate valve 20 mm , hydraulic door closer , angle valve , powder coating bib tap , toilet paper holder cp , pvc waste pipe flexible type 32 mm and 600 mm long , urinal pot viterous flat back , pvc bend 110 mm bore , pvc connection pipe 15 by 600 mm , basin mixtuer assembly cp , ppr union 15mm , ppr gate valve 15mm , 15mm brass fancy tap angle valve , ppr union 20 mm , ppr elbow 20 mm , door wall hook rail set peg set 3 pin , plywood bwr 8 ft by 4 ft by 8 mm , stainless steel curtain rails 4mtr each , plywood bwr 8 ft by 4 ft by 4 mm , pvc three layer water storage tank 300 ltrs , lever type flushing cisten single flush system 10 ltr , ppr gate valve 25 mm , elbow gi 15 mm , door stopper aluminium , ppr 25mm tank socket , cp waste coupling 32 mm , tee equal gi 15 mm , helical door spring , pvc shelf 450 by 200 mm , ppr socket 15mm , ppr elbow 15 mm , nipple gi 15 by 100 mm , 2 way bib cock cp , aluminium sliding bolt 250 mm long , socket gi 15 mm , gi bend 15 mm , stop cock cp brass 15 mm , towel ring cp , ppr tank socket 20 mm , plywood bwr 8 ft by 4 ft by 6 mm , union gi 20 mm , pvc connector 110 mm bore , ppr socket 25 mm , bib cock aassembly cp , ms butt hinges 100 mm , door wall hook rail set , ppr socket 20 mm , pvc towel rail 600 mm , looking mirror 5 mm , ppr tank socket 15mm , shower cp 100 mm with rod , pvc soap dish , white cement , flushing handle suitable for 10 ltrs cistern , pvc over head shower with arm , jet spray cp 15 mm , tee gi 15mm , pvc waste coupling 32 mm , aluminium anodised handle 100 mm , excel acrylic emulsion terracoda , ppr pipe 25 mm dia 3 layer with socket , pvc bend for cistern , ppr union socket 50 mm , ppr gate valve 50 mm , tee gi red 20 by 20 by 15mm , pvc stop cock 20 mm , synthetic enamel paint white colour , union gi 15 mm , ppr union socket 25mm , ppr pipe 40 mm dia 3 layer with socket , tee gi 20 mm , socket gi reducer 15 by 20 mm , pvc pillar tap 15 mm , connection pipe wired 600mm , m seal 100 gms , elbow gi 20 mm , teflon tape 19mm , syphon kit for flushing cistern , nails 3 inch 75mm , ppr pipe clamp 20 mm dia , ppr union socket 40 mm , ppr pipe 32 mm dia 3 layer with socket , pvc tee 110 mm , ppr union socket 32 mm , gi union socket 25mm , tank socket gi 15 mm , aluminium barrel tower bolt 75 mm , u clamp 20mm dia , symphon kit for dual flushing cystern , pvc grating round type 140 mm , ppr elbow 90 degree 50mm , aluminium barrel tower bolt 100 mm , glazing putty oil glazed , gi socket 50mm , ppr reducing tee 40 by 25mm , pvc bend 75 mm , tank socket gi 20 mm , gi socket 25 mm , ppr elbow 90 degree 32mm , ppr brass l 20mm , ppr brass t 20mm , ppr t 20mm , ppr union 25 mm , plywood bwr 8 ft by 4 ft by 12 mm , plywood bwr with 3 ply 8 ft by 4 ft by 16 mm , foam sheet 6 ft by 3 ft by 75 mm , plywood bwr 8 ft by 4 ft by 6mm , plywood bwr 8 ft by 4 ft by 3mm , plywood bwr 8 ft by 4 ft by 4mm , plywood bwr 7 ft by 3 ft by 12 mm , foam cushion 530 by 530 mm , prelaminated mdf board 8 ft by 4 ft by 12mm , ply wood commercial one side teak face 9 ft

Central Government/Public Sector

CTN :45664061

15 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For supply, installation, rewiring and testing of existing high mast with 4 sqmm 5 core electro propel rubber cable for 30 meter height high masts per is:694 along with terminal connector 440v, 30a ampere copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 4 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 61 7-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35 with current rating of minimum 10a size 2.5 and 99.9% etp grade copper conductivity 97% iacs minimum, finish tin-plated, conforming to standards bs:en-61238 and other accessories [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45643193

27 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection operated on 415v ac supply with load current 63a, 2 pole conforming to is 12640 (part 2):2008 iec61009-1:1996 or latest with bimetallic terminal connector suitable for 4.0 dia aluminium tubular busbar for 63a copperpalm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 4.0 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with earth leakage protection of 30 ma, with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination, manufactured out of ec grade aluminium extruded extension tubes of minimum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordancewith is:5082 specifications, duly conforming in all respects to is:2121 part-i & ii and is:2544 with provision for sustaining continuous operating temperature up to 120 degree c under specified service conditions. [ warranty period: 30 months after the date of delivery ] ]

Aluminium Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors