Latest aluminium busbar Tenders | Government aluminium busbar Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

CTN :45551266

01 Jul, 2026 NA

Kharagpur - West Bengal

Tender For w acting for and on behalf of the president of india invites e-tenders against tender no e-73-dyceekgpw-cbc-26-27 closing date/time 01/07/2026 15:00 hrs. bidders will be able to submit their original/revisedbids upto closing date and time only. manual o ers are not allowed against this tender, and any such manual o erreceived shall be ignored.1. nit headername of workupgradation of cbc overhauling section and corrosion repair shop of wagonrepair shop, kharagpur workshop.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime01/07/2026 15:00date time of uploadingtender09/06/2026 16:38pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 2402108.76tendering section elegenbidding style single rate for tender bidding unitabove/below/parearnest money (rs.) 48100.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 17/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-cost of supply of material for electrical work1712792.421a12.00numbers383500.00 767000.00 at par 767000.00description:- supply of incoming 1x 630a,4p, 50ka mdo type microprocessor based acb withipr1+ release & outgoing (i)2 x 320a,4p, 36ka thermal magnetic release with adjustable thermal &fixed magnetic mccb (ics=100%icu),(ii)2 x 200a,4p, 36ka thermal magnetic release withadjustable thermal & fixed magnetic mccb (ics=100%icu),(iii)4 x 100a,4p, 36ka thermal magneticrelease with adjustable thermal & fixed magnetic mccb (ics=100%icu) tted in lt panel box14swg crca sheet powder coated 4way cu busbar of suitable rating, indicator lamp, digitalmultifunction meter & all other accessories. mccb & acb make:- havellls/ lk/ schneider/siemens.2a210.00numbers 400.02 4000.20 at par 4000.20description:- supply of mcb metal enclosure 4 pole3a380.00numbers 413.00 33040.00 at par 33040.00description:- supply of pyramid insulator as per drawing4a470.00numbers 531.00 37170.00 at par 37170.00description:- supply of pin type insulators as per drawing.5a550.00numbers1121.00 56050.00 at par 56050.00description:- supply of gi-angle (40 x 40 x 06 mm) bracket 4 way with porcelain insulator as perdrawing suitable for overhead light.6a610.00numbers 248.98 2489.80 at par 2489.80description:- supply of mcb metal box 2 pole7a720.00numbers1323.96 26479.20 at par 26479.20description:- supply of 16/20/25a power unit (containing 4 module plate, starter, socket and plug)for ac unit.8a85.00numbers11434.20 57171.00 at par 57171.00description:- supply and testing of oscillating type bldc pedastal fan, 230 v,400 mm sweep,multi speed, remote/button controlled make- atomberg, havells, crompton, bajaj, usha, orient.9a9 150.00 metre1150.50 172575.00 at par 172575.00page 1 of 18run date/time: 09/06/2026 16:38:46kgp-workshop-electrical/south eastern rlytender documenttender no: e-73-dyceekgpw-cbc-26-27closing date/time: 01/07/2026 15:009description:- supply of hot dip galvanized 2mm thickness perforated cable tray of size 300 mmwidth and 50 mm height and complete accessories as per is, ie rules and site requirement10a10 50.00 metre 575.25 28762.50 at par 28762.50description:- supply of cable trays 2mm thickness size 100 x 50 mm gi, perforated (rmt) withcover complete and as per is, ie rules and site requirement.11a11 10.00numbers 180.54 1805.40 at par 1805.40description:- supply of combined switch socket box - 16 a, capton 5-in-1 combined switch andsocket with isi mark,as per is:3854 or latest12a122.00numbers34700.26 69400.52 at par 69400.52description:- supply of 4 pole mccb ,release range (80-200)a, breaking capacity 36 ka,microprocessor release with inbuilt earth pr

CTN :45703815

11 Jul, 2026 6.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of general electric items b b - wire 22swg , glass sleev 14 mm , slip ring for cane unloader bbl make 10 kw motor , exhaust fan 24 , plastic cooling fan for 5 00 hp motor , plastic cooling fan for 7 5 hp motor , plastic cooling fan for 10 hp motor , havells make auto cut hot air blower 2000 watt with overheat protection , soldering iron 65 watt , soldring wire , plastic cooling fan for 50 hp motor , teflon rod dia 65mm length 300mm , glass sleev 16 mm , mash rum type push button red , mash rum type push button blue , plastic cooling fan for 15 hp motor , carbon brush 12 20 32 , mettalic carbon brush 20 15 8 , carbon brush 30 20 100 , timer st 800 , carbon brush 21 31 37 , porcelean kit kat200 amp 415 v standard make , fuse wire 6 amp , fuse wire 10 amp , fuse wire 16 amp , dol starter empty box mk1 , dol starter empty box ml2 , exhaust fan 16 1 phase 960rpm ci body crompton havells make , carbon brush 20 32 40 , rocker arm 12 5 hp kec slip ring motor , h t connector 3 way , h t connector 6 way , potentio meter 500 ohm 2 w 10 turn bourns make , diode 6 amp , step down double phase transformer 415 vac to 24vdc , usha bajaj make room heater with ss reflector and body , dc solenoid coil for hydraulic grab for reverse forward direction , ss seamless ring size 1 for cane unloader , karam make industrial safety belt , silk rope 3 4 resham , foldable aluminium ladder 16 ft , amp meter 400 5 96 96 , amp meter 0 100 5 96 96 , amp meter 150 5 96 96 , limit switch 1 no 1 nc type ls 011 10 amp 500 v , frequency meter 96 96 , frequency meter digital type , air cooled resistance box for 12 5 hp 15 hp bbl make slipring motor , analog rpm meter make beacon sensor type input magnetic picup no of teeth 06 range 0 8000 rpm , selector switch for volt meter , selector switch for amp meter , volt meter 96 96 0 500 vac ae make , current transformer ct 250 5a , amp meter 300 5 96 96 , amp meter 600 5 96 96 , dyno pack with controller , current transformer ct 300 5a , current transformer ct 400 5a , current transformer ct 600 5a , current transformer ct 500 5a , current transformer ct 100 5a , carbon holder for 12 5 hp slip ring motor cane unloader motor , current transformer ct 500 1 a , amp meter 500 5 96 96 , amp meter 800 5 96 96 , porcelean kit kat 100 amp 415v , amp meter 250 5 96 96 , amp meter 1200 5 96 96 , timer 800 q 1 no 1 nc , portable single phase welding machine 220 vac , current transformer 1200 1 , current transformer 1200 5 , ictpn switch 200 amp , metravi make nctm 200 contact on contact combined digital tacho metermeter , diamond hammer drill bit size 6 mm for aluminium busbar drilling , diamond hammer drill bit size 8 mm for aluminium busbar drilling , diamond hammer drill bit size 10 mm for aluminium busbar drilling , diamond hammer drill bit size-14 mm for aluminium busbar drilling

CTN :45706513

07 Jul, 2026 NA

Saharanpur - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; fabrication and erection of 3 phase dsl bus bar system ryb 55 meter runway for supplying mill s overhead crane along with all the material ms angle busbar..

CTN :45709927

30 Jun, 2026 NA

Sirmour - Himachal Pradesh

Tender For repair and maintenance of various lwss/lis schemes under jal shakti division nahan in tehsil nahan dist. sirmour (h.p.) (sh:- providing and fixing soft starter 30 hp & 25 hp and p/supplying of submersible cable single core cable busbar to panel 6 mm2, 4 mm2, 2.5 mm2 at lwss kotri, lis khajurna under section shambhuwala) job-i.

CTN :45709928

30 Jun, 2026 NA

Sirmour - Himachal Pradesh

Tender For repair and maintenance of various lwss/lis schemes under jal shakti division nahan in tehsil nahan dist. sirmour (h.p.) (sh:- providing and fixing soft starter 30 hp & 25 hp and p/supplying of submersible cable single core cable busbar to panel 6 mm2, 4 mm2, 2.5 mm2 at lwss kotri, lis khajurna under section shambhuwala) job-ii.

CTN :45709929

30 Jun, 2026 NA

Sirmour - Himachal Pradesh

Tender For repair and maintenance of various lwss/lis schemes under jal shakti division nahan in tehsil nahan dist. sirmour (h.p.) (sh:- providing and fixing soft starter 30 hp & 25 hp and p/supplying of submersible cable single core cable busbar to panel 6 mm2, 4 mm2, 2.5 mm2 at lwss kotri, lis khajurna under section shambhuwala) job-iii.

CTN :45709930

30 Jun, 2026 NA

Sirmour - Himachal Pradesh

Tender For repair and maintenance of various lwss/lis schemes under jal shakti division nahan in tehsil nahan dist. sirmour (h.p.) (sh:- p/supplying of submersible cable single core cable busbar to panel 6 mm2, 4 mm2, 2.5 mm2 at lwss kotri, lis khajurna under section shambhuwala) job-iv.

Central Government/Public Sector

CTN :45713844

11 Jul, 2026 48.00 Lacs

Baghpat - Uttar Pradesh

Tender For repair and periodic maintenance of dg sets, amf panels, solar water heater, swimming pool, lt ug cables, poles, apfc panels, busbar panels and other allied external electrification works at af stn chandinagar under aor of ge (af) faridabad

State Government

CTN :45629517

30 Jun, 2026 NA

Jharsuguda - Odisha

Tender For procurment of aluminium busbar

Aluminium Busbar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government