Get complete information related to latest Aluminium Lugs Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminium Lugs Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminium Lugs Tenders.
Tender For provision of electrical connection for installation of equipments for smart warehouse project at fsd godhra - supplying of xlpe insulated & pvc tape innersheathed aluminium conductor armoured cable of 1.1 kv grade of 2 x 6 sqmm size confirming to is:7098 (part- i) 1988 with up to date ammendment as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size up to 35 sq. mm (clamped with cable tie/strip clamp) size on wall / steel pipe surface as required., supplying and making end termination with brass compression gland and aluminiumlugs for 2 x 6 sq. mm (19mm) size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.
Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminiumlugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11
Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminiumlugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo
Tender For supply electric material ,at talandage tal hatkanangale - divabatti, 14 w led bulb, 18 w led bulb, 26 w led bulb, pendant holder, 1/18 wire (aluminium), 1/18 wire (copper), 2.5 sq. m.m. service wire, 4 sq.m.m. service wirea, 6 sq.m.m. service wire, 10 sq.m.m. service wire, 2.5 m.m.x 4 core cable (aluminium), 4 m.m.x 4 core cable (aluminium), 6 m.m.x 4 core cable (aluminium), 10 m.m.x 4 core cable (aluminium), 16 m.m.x 4 core cable (aluminium), 2.5 m.m.x 3 core cable (copper), 4 m.m.x 3 core cable (copper), 2.5 m.m.x 4 core cable (copper), 4 m.m.x 4 core cable (copper), 6 m.m.x 4 core cable (copper), 10 m.m.x 4 core cable (copper), 1 sq.m.m. multistand wire (copper), 1.5 sq.m.m. multistand wire (copper), 2.5 sq.m.m. multistand wire (copper), 4 sq.m.m. multistand wire (copper), 6 sq.m.m. multistand wire (copper), 10 sq.m.m. multistand wire (copper), cello tape, 30 w led street light fitting, 50 w led street light fitting, 30 w led driver, 50 w led driver, 30 w led pcb, 50 w led pcb, 50 w led frad light fitting, 100 w led frad light fitting, 150 w led frad light fitting, 200 w led frad light fitting, 100 w led hybe fitting, 150 w led hybe fitting, 200 w led hybe fitting, 3/4" l bracket, 1" l bracket, hukup wire, cement pole clamp, lokhandi pole clamp, 45 w cfl fitting, 36 w cfl fitting, 85 w cfl fitting, cfl fitting holder, porselin holder (chinimati holder), 36 w pll tube, 36 w pll elcetronic chok, 36 w pll holder, strip conector, 16amp. x 250 y main switch, 32amp. x 250 v main switch, 16amp. x 500 v main switch, 32amp. x 500 v main switch, 63amp. x 500 v main switch, 32 amp. riverce forward switch, 16amp. x 250 v fuse kit kat, 16amp. x 500 v fuse kit kat, 32amp. x 250 v fuse kit kat, 32amp. x 500 v fuse kit kat, 63amp. x 500 v fuse kit kat, 100amp. x 500 v fuse kit kat, 200amp. x 500 v fuse kit ka, 16amp.change over switch, 32amp.change over switch, 16amp. mcb (s.p.), 32amp. mcb (s.p.), 63amp. mcb (s.p.), 6amp. mcb (s.p.), 16amp. mcb (d.p.), 32amp. mcb (d.p.), 40amp. mcb (d.p.), 63amp. mcb (d.p.), 1/2 mcb box, 4 way mcb box, 8 way mcb box, 21x15 miter box, 1.5 x 2 miter box, 2.5 x 3 miter box, row rubber, copper lugs, aluminiumlugs, hand gloves (11000w), bobin, j i wire, wire cutter, pakkad, 20 w led tube set, 25 w led tube set, celing fan, table fan, wall fan, pedstal fan, 40 w led solar street light fitting, 60 w led solar street light fitting, 4 mtr. round pole, 6 mtr. round pole, 8 mtr. round pole, tester, big tester, 1" casing patti, 12w/10 a h/11.1v led street light solar, 14w/12 a h/12.8v led street light solar, 20w/12 a h/12.8v led street light solar, 24w/24 a h/12.8v led street light solar, 30w/24 a h/12.8v led street light solar, 36w/30 a h/12.8v led street light sola, 100a single fuse, 70 w led driver, 100 w led driver, 150 w led driver, 70 w led pcb, 100 w led pcb, 150 w led pcb, 70 w led street light fitting, 100 w led street light fitting, 150 w led street light fitting, clamp nut bolt
Tender For supply of decentralized material and installation of 33kv isolator - material, 33 kv isolator vertical type, labour, fabrication of steel, inst. of danger board/number plate, installation / fixing of 33 kv isolator, fixing of aluminiumlugs