Latest aluminium lugs Tenders | Government aluminium lugs Tenders

State Government

CTN :41225832

02 Aug, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps. - supply and installation of electrical and mechanical equipment of tubewell at ram nagar sps by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet neoprene rubber 50% synthetic 50% make :- jyoti / national. (1.5 to 2.5 mm) thickness., lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells/djb approved make., s/o front mounting add on aux contact block. make : havells/l&t/djb approved make., s/o three pole power contractor -25a cap. make l&t/ havells/djb approved make., s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae/djb approved make., s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t/djb approved make., s/o indicating lamp set for ryb phase. make l &t/ havells/djb approved make., s/o single phase preventor. make l&t/ minilac/djb approved make., s/o timer switch digital/anolog type. make l&t / havells/djb approved make., s/o over load relay thermal type 14-23 a. make l &t/ havells/djb approved make., s/o star delta timer on delay. make l&t /havells/djb approved make., s/o sp mcb 6a. make : l&t/havells/djb approved make., s/o 3p mcb 63. make : l&t/havells/djb approved make., push button 22.5mm(red / green) make : l&t/havells/djb approved make., s/o 4p 63 amp elcb make : l&t/havells/djb approved make., changeover switch 63 amp. make : l&t/havells/djb approved make., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t/djb approved make., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national /djb approved make., labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

State Government

CTN :41189637

13 Aug, 2025 35.92 Lacs

Dumka - Jharkhand

Tender For procurement of electrical items under o&m head 2025-26 - electrical items :, aluminium pipe 40 mm dia, connector pipe to panther, connector panther to panther, connector panther to ab switch, connector pipe to ab switch, connector dog to ab switch, p g clamp for 200/150 sq mm conductor, p g clamp for 80/100mm2, rubber mat along length of pannel, 30 v 80 ah battery charging unit complete with battery and stand, led flood outdoor light with ip 66protection rectagular (100w), lt phase seperator, t/c fuse wire 12/ 14/ 16/ 18/ 22/ 28/ 32 swg, polycarbonate seal bit

State Government

CTN :41203943

13 Aug, 2025 212

Mandya - Karnataka

Tender For for supply of lab equipments and materials to srishti tinkering lab in 04 and subject to condtion as per the tender documents karnataka public schools functioning under samagra shikshana karnataka in mandya district - jewellary making kit, paper cups, paper straws, cardboard sheets, plastic straws, paper dishes, icecream sticks, crayons, water colors, canvas, bamboo skewers, sketch pens, desktop computer with 15-20 mins back-up ups, led 43 screen with keyboard with hdmi, computer tables, working tables, chairs, electrical work, posters, painting, wall mounted fans/ceiling fans, internet, cdma routers, dongles, storage system- almirah with glass door, storage boxes, sectioned boxes, display shelves for projects, usb to dc jack cable, first-aid kit, fire extinguisher (handy units), safety goggles (with/ without led torch), safety gloves pairs, safety mask, pin cushion and pins, sewing box, trimming scissors, seam ripper, pinking shears, sewing and embroidery scissors, thread, needles, crochet needles, wool bundle, colored craft papers, origami papers, art and craft scissor, paper tape/masking tape, fevicol bottles, double sided tape, acrylic color, coloring brush, color pallete, wood glue 500 ml dpi,., pliers, 4.5-inch size1, pliers, 4.5-inch size2, pliers, 4.5-inch size3, pliers, 4.5-inch size4, pliers, 4.5-inch size5, pliers, 4.5-inch size6, pliers, 4.5-inch size7, stainless steel rule, mechanical + digital vernier calliper, spirit level, digital pen electric tester, digital multi meter, syringe- 10 ml, syringe- 20ml, leveling pipe- 8 mm, glue sticks, nuts and bolts and screw , small cable tie pack -pack of 100, medium cable tie pack -pack of 100, big cable tie pack - pack of 100, sand paper, power strip adaptors, bulb holders1, bulb holders2, mini hacksaw blades, pliers, 4.5-inch size, ball pein hammer, steel shaft claw hammer, c-clamp, allen key set, drill machine set, cordless drill machine set, spanner set, removable bench vice, precision screw driver set, wrench, wire strippers, screwdriver, drill bit set, file set, mini file set, flexible cutting mat, pegboard, hot glue gun, soldering kit, adapter with 5v, 2a, adapter with 12v, 2a, soldering helping hand, return measuring tape, copper tape- 5mm/10mm wide, bo motor wheels, insulating tape, education 3d printer kit and tools, filament for 3d printer - 1000 g each, cardboard, foam core boards, education 20m spool of thick strings various colour, rubber band, popsicle sticks, hacksaw frame, hacksaw blades, mini hacksaw frame, rfid reader tags,., dc motor1,., servo motors1, servo motors2, servo motors3, education 150 rpm bo motor, l298p motor driver, servo motor tester, robotics diy kit, drone kit, solar panels- 6v, 100mah, solar panels- 12v 10w, mq-8 hydrogen gas sensor, mq-135 air quality sensor, ir transmitter/ receiver, ultrasonic sensor module hc-sr-04 or compatible, triple axis accelerometer, pir motion detector module, pulse rate heart sensor, relay module - 5v 10a - 2 channel relay module. compatible with arduino, relay module - 5v 10a - 1 channel relay module. compatible with arduino, big sound microphone module, soil moisture sensor module, touch sensor, metal touch sensor module, rain drop sensor, flex sensor, temperature sensor, temperature and humidity sensor module, force pressure sensor, colour recognition sensor, water flow sensor, sound sensor, power bank, rf modules tx and rx 315 mhz ask, stepper motor with driver board, servo motors, battery clips with dc jack, hook-up wires, jumper cable male-male, jumper cable male-female, jumper cable female-female, rgb leds, leds (red), leds (green), leds (blue), leds (yellow), leds (white), timer ic - lm 555, diodes and transistors kit, button switch set (set of 100 pieces ), capacitative touch module, capacitative touch switch module, ir sensors, obstacle avoider sensor module, triple axis magnetometer, humidity sensor, mq - 2 smoke detection, mq-3 alcohol - ethanol sensor, mq-4 methane natural gas, mq-5 methane liqui

Central Government And Public Sector

CTN :41026707

06 Aug, 2025 NA

Imphal - Manipur

Tender For corrigendum : supply of supply of sitc of 2nos 30 kva and 2nos 20 kva rtu dg sets in manipur d d - 30kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 30kva dg set with acceptance testing , supply of 20kva 3phase 415v dg set with standard control panel and acoustic enclosure as per cpcb iv , itc of 20kva dg set with acceptance testing , earthing with gi earth plate 600 mm x 600 mm x 6 mm thick , providing and fixing 25 mm x 5 mm gi strip in 40 mm dia gi pipe , providing and fixing 25 mm x 5 mm gi strip on surface or in recess , providing and laying in position reinforced cement concrete plinth for dg set , supplying of 3.5x25sqmm of pvc insulated and pvc sheathed xlpe steel armoured aluminum conductor ug power cable of 1.1kv grade , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm direct in ground , laying of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq. mm in the existing pipe , laying and fixing of one number pvc insulated and pvc sheathed xlpe power cable of 1.1 kv grade of size upto 35 sq mm clamped with 1mm thick saddle on wall surface , supplying and making end termination with brass compression gland and aluminium lugs for size 3.5x25 sq mm

Central Government/Public Sector

CTN :41200099

07 Aug, 2025 NA

Tumkur - Karnataka

Tender For supply of 2 inch pvc casing by capping , 24 inch 600mm 900 rpm exhaust fan , socket type electronic fan regulator , 15a switch cum socket 5 in 1 , 10amps single pole mcb , 10amps double pole mcb , electrical rubber mat , 16a by 5 pin plug and socket set 3 phase industrial plug cum socket , 32a by 5 pin plug and socket set 3 phase industrial plug cum socket , 63a by 5 pin plug and socket set 3 phase industrial plug cum socket , 1 and 1by2 inch cotch screw 35x8 , 2 inch cotch screw 50x8 , 2 and 1by2 inch cotch screw 63x8 , 3 inch cotch screw 75x10 , 3 by16 mbyc screw 1 inch with nut , 3 by 16 mbyc screw 11by2 inch with nut , 3 by 16 mbyc screw 2 inch with nut , m6x1 inch bolt and nut , m6x2 inch bolt and nut , m6x3 inch bolt and nut , m8x1 inch bolt and nut , m8x2 inch bolt and nut , m8x3 inch bolt and nut , m10x1 inch bolt and nut , m10x2 inch bolt and nut , m10x3 inch bolt and nut

State Government

CTN :41240641

18 Aug, 2025 NA

Nabarangapur - Odisha

Tender For supply of equipment, tlms & furniture for saksham resource centre for the cwsn at pm shri schools of nabarangpur district-, physiotherapy bed, electrical stimulation machina, steel moblis stool, steeper for therapy bed, grass mat, prone standin frame, b&pool, pes-nut bell, fitair case with sid, parallel bar with minor, trampoline with ne, ralance beam, balance board, physio-mal, speech trainer, speech mirror, speech therapy table, chay for, therap a, auditory training kil, tactis recreational equipment, smart cane for training purpose, led digital page magnifier, embossed maps & globe, blind folds, , tlm ki primary, tlm ka secondary, tlm kit pr vocational, material for teaching adl, adl board, luminating sensory table, sensory light, occupational therapy equipment, occupational therapy equipment sensory kit, massager, smart tv, cupboard, table, chair, wall mounted shelf, dai, one computer with nvd software

CTN :41209017

06 Aug, 2025 NA

Reasi - Jammu And Kashmir

Tender For supply of hd battery tester for upto 180ah 450 amp with timer , digital alternator and regulator tester 12 and 24 volts , distilled water plant , 64 pcs mech tool kit , auto electrical kit , diesel nozzle tester , esd work bench size 6x2x6 , rubber mat

CTN :40933212

31 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For bid to ras supply of non - woven fibre glass chopped strand mat- 300 gr/sq. mtr. 1040 mm wide. as per electrical grade (e-

CTN :41172977

07 Aug, 2025 NA

Deogarh - Odisha

Tender For procurement of resource centre materials for cwsn for pm shri schools in the district of deogarh under samagra shiksha, deogarh for the year 2024-25 - physiotherapy bed , electrical stimulation machine, height adjustable stool(steel) , stepper fortherapy bed ,grass matfor floor , pronestander , ball pool , peanut ball , staircase , parallel bar(for children) , trampoline , inclinedtaperedbalancebeam , balanceboard , physio mat , sensorystimulationkit , speechtrainer , speechtherapymirror , speechtherapytable , chair (kids) , languagetraining kit , braille kit , tactilerecreationalequipments , smart cane , led pagemagnifierwith stand , illuminatedtactile globe , embossedtactile map , illuminatedhand heldmagnifier , stand typemagnifiers , tlm kit(primary) , materials forteachingadl , adl board , illuminatedsensorytable , sensory light , wallmountshelf , dari , computer with nvda software

Central Government/Public Sector

CTN :41185962

13 Aug, 2025 98.60 Lacs

Shillong - Meghalaya

Tender For tender for supply of provision of individual intensity control for runway threshold and end lights at shillong airport : : - supply of 1 x 6 sq. mm 5 kv grade single core. (refer item no.1 of boq page no.1) , supply of 5 kv grade 6 sq. mm size plug and receptacle. (refer item no.2 of boq page no.1) , supply of 50 mm size hdpe pipe. (refer item no.3 of boq page no.1) , supply of medium class gi pipes 40 mm. (refer item no.4 of boq page no.1) , supply of following size of xlpe insulated pvc sheathed aluminum conductor armored power cable of 1.1 kv. (refer item no.5 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.6 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.7 of boq page no.1) , supplying and making cable route marker with cement concrete. (refer item no.8 of boq page no.2) , making field connections by crimping upto 6 sq.mm plug and receptacle. (refer item no.9 of boq page no.2) , laying of following size hdpe pipe of size upto 90 mm isi marked along with existing accessories. (refer item no.10 of boq page no.2) , laying of the following size hdpe pipe of size upto 90 mm isi marked. (refer item no.11 of boq page no.2) , laying of one number pvc insulated & pvc sheathed armoured aluminium cable. (refer item no.12 of boq page no.2) , laying of one number pvc insulated and pvc sheathed. (refer item no.13 of boq page no.2) , laying of following size dia. medium b class gi pipe. (refer item no.14 of boq page no.2) , laying and fixing of one number pvc insulated. (refer item no.15 of boq page no.3) , laying and fixing of one number pvc insulated and pvc sheathed. (refer item no.16 of boq page no.3) , providing and laying 6 swg gi wire in the trench. (refer item no.17 of boq page no.3) , earthing with gi earth pipe 4.5 m long and 40mm dia. (refer item no.18 of boq page no.3) , supply of ci transformer housing box. (refer item no.19 of boq page no.3) , installation of transformer housing box. (refer item no.20 of boq page no.3) , sitc of indoor type air cooled constant current regulator. (refer item no.21 of boq page no.4) , sitc of indoor type air cooled constant current regulator. (refer item no.22 of boq page no.4) , integration of threshold and end lights circuits with the existing alcms panel. (refer item no.23 of boq page no.4) , design manufacturing supply installation testing and commissioning of lt panel. (refer item no.24 of boq page no.5)

Aluminium Lugs Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector