Latest aluminium section Tenders | Government aluminium section Tenders

State Government

CTN :45445480

12 Jun, 2026 5.78 Lacs

Kollam - Kerala

Tender For deposit-shabda surabhi smart class rooms-mynagappally gramapanchayat-supply and installation of electronic equipments for arranging sabda surabhi smart class rooms in 6 govt. lp schools at mynagappally gramapanchayat, kollam.-general electronics work - public address system, od156085/2025-2026:supply and installation of desktop paging microphone with multi tone chime having flexible 30 cm gooseneck, frequency response minimum 50-10,000hz, sensitivity 2.0mv/pa or better, low noise cable with phone plug, supplied with 2x1.5v(um-3) pencil cells, aluminum die cast top and special high reliability switches with integrated led indicator etc. 3 year warrantypreferred make- ahuja, bogen, bosch, studiomaster., od156086/2025-2026:supply and installation of wall mount compact, high fidelity speaker - having rated power 30watts (30w / 15w / 7.5w / 3.75w), frequency response - 100hz to 20khz, sensitivity - 88 3db (1w, 1m), 5 inch woofer and 1 inch tweeter etc. warranty-3 yearspreferred make - studiomaster, ahuja, dynatech or equivalent , od156212/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 4 balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 160w rms, at 1 percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156243/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 3balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 80w rms, at 1percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156348/2025-2026:supply and installation of 16 channel zone selector with provision for switching a 100v audio signal to one or more of up to 16 zones.1 x 100v input, 16 x 100v outputs, manually switchable, built in relay for all call. preferred make: ahuja or equivalent warranty 3 years., 1.17.2:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.2 x 1.5 sq. mm, 1.21.1:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm, od158699/2025-2026:supply and installation of necessary electrical accessories for giving proper electrical power to the rack - warranty 3 years., od158700/2025-2026:supply and installation of wooden rack for placing amplifier, cordless receiver and mixer unit.

corporations/Associations/Others

CTN :45444016

25 Jun, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For annual contract for supply of electrical items for hornbill nest resort at sri vijaya puram and dolphin beach resort at swaraj dweep. - modular switch 6 a/10 amps, modular switch 16 amps, modular socket 5 pin 6 amps/10 amps, modular socket 6 x 16 amps, modular telephone jack 1 m, modular starter single phase 20 amps, hotel key fob switch 32 amps +key tag, modular fan regulator, multi plug conversion, led bulbs 7 w white/warm(thread type), led bulbs 7 w white/warm(pin type), capacitor oil 2.5 mfd, pvc wire multi stand copper 1.5 sq.mm.(2 core), pvc wire multi stand copper 2.5 sq.mm., pvc wire multi stand copper 4.00 sq.mm., pvc wire multi stand copper 6.00 sq.mm., mcb single pole 6 to 32 amps, isolator 4 pole 63a, isolator double pole 40 amps, mcb 4 pole 40 amps, pvc aluminum u.g. cable armod(25 x 4), pvc aluminum u.g. cable armod (50 x 3.5), pvc aluminum u.g. cable armod (120 x 3.5), u.g. cable 10 sqmm (2 core), dwc pipe 40mm, pvc pipe 25 mm mms, pvc pipe 20 mm mms, pvc bend/elbow 25 mm, pvc bend/elbow 20 mm, pvc t 25 mm, pvc t 20 mm, surplus box 2 m, surplus box 3 m, surplus box 4 m, surplus box 6 m, surplus box 8 m, surplus box 12 m, outer plate 2 m, outer plate 3 m, outer plate 4 m, outer plate 6 m, outer plate 8 m, outer plate 12 m, tube light 4 feet led fitting 20w, thermostat for geyser 25 a, thermostat for geyser 20 a, pvc channel 25 mm(2 mtr), led driver 3 watt to 10 watt, led driver 12 watt, led driver 18 watt, mirror tube 2 feet led fittings, insulation tape, calling bell, calling bell switch 6 amps 9 (modular type), bulb holder pin type, flood light 10 watt, green/white, flood light 30 watt, green/warm, flood light 100 watt, green/warm, led pannel fittings (round/square) 12w to 15w, led pannel fittings (round/square) 6w to 9w, led pannel fittings (round/square) 18w to 22w, spot light 3 watt (pin type/ceiling fitting), ceiling fan 1400mm, padestial fan heavy duty 450mm, exhaust fan plastic body 300/250 mm dia, plug top 20 amps., led pannel fittings 5 to 10 w, 2 way 6 amp switch (modular type), rope light adapter, syntex box 5" x 7", d.b box 4 way tpn, fuse wire 200 amps, modular calling bell, service wire 6 sq.mm, square box/junction box, celling rose, cut out 500 amps, rope light led (50 mtrs) warm/green, aluminium leg 10 sq. mm., aluminium leg 16 sq. mm., aluminium leg 25 sq. mm., aluminium leg 50 sq. mm., aluminium leg 90 sq. mm., aluminium leg 120 sq. mm., aluminium leg 150 sq. mm., street light led 50w warm, stabilizer 5 kva, postal lamp 20w led, model: posttop 20w, ref. no. lpth -20.ww, junction dummy plate 4" pvc, foot lamp 4 way led 5w/7w, modular dummy plate, panel mounted mccb 4 pole 250amps, 35 kva, panel mounted mccb 4 pole 160amps, 25 kva, panel mounted mccb 4 pole 100amps, 25 kva, panel mounted mccb 4 pole 80amps, 25 kva, panel mounted mccb 4 pole 63amps, 25 kva, mccb 4 pole 36 kva, 8kv, model: dn3 - 400d, panel mounted change over 400 a, postal lamp led driver 20 w (xitanium 20w, 0.7a 28v), cable tie 250mm, flexible hose pipe 20mm, 2 pin top male/female, cable clip (5mm/8mm/10mm/20mm/25mm), ms screw 25/7, wall grip/plug (1"), change over 63 amps, main switch tpn 63 amps, main switch tpn 100 amps, zero watt bulb led, speaker wire 2.5 sq.mm, postal lamp driver (sodql-54-700-40 watt), sign board driver waterproof led power supply (model no. mj-400-12rp), tv jack modular, plug top 3 pin 6 amps, multi core wire 10 sq.mm, 3 phase preventer voltage monitoring relay series s m 500 4 wire, aluminium leg 240 sq. mm., modular switch 20 amps two module, wall mount fan (plastic body) 450mm dia, exhaust fan (steel body) 450mm dia

CTN :45445016

16 Jun, 2026 4.99 Lacs

North 24 Paragana - West Bengal

Tender For renovation and upgradation of two no. attached toilet with pathway, sanitary plumbing and office cubicals (aluminium section with acp board) of mini fsl building ground floor at svspa, barrackpore, wb - e-tender for renovation and upgradation of two no. attached toilet with pathway, sanitary plumbing and office cubicals (aluminium section with acp board) of mini fsl building ground floor at svspa, barrackpore, wb

CTN :45457129

19 Jun, 2026 NA

Patiala - Punjab

Tender For supply of material for repair of windows of lab no .303 of civil engineering department at pup. - aluminium section, aluminium angle , aluminium clip beading m.s. hinges , neoprene rubber gasket , plain glass , aluminium tower bolt , aluminium handle , stainless steel screw , hacksaw blade (double), steel j hook

CTN :45420173

13 Jun, 2026 1.03 Crore

Baramulla - Jammu And Kashmir

Tender For supply of foundation bolt 450 mm long , hydrophobic poreblocking ingredients , pre fab welded door lintel made out of 02 nos ismc 200 x 75mm , pre fab welded window loop hole lintel made out of 02 nos ismc 200 x 75mm , 0.60mm thick ppgi sheets size 810x3050mm , 3.00 m long rectangular hollow section , 2.30m long rectangular hollow section , 150mm long ms angle , cable pvc insulated of size 1.5 sqmm , switch socket combination 16a 3 5 pin , 6a one way single module flush type modular switch , supply 10 inch x 8 inch first class teak wood switch boards , supply 7 inch x 4 inch first class teak wood switch boards , supply 4 inch x 4 inch first class teak wood switch boards , 32a spn or dp main switches , 16a 240v two pole dp changeover switches , 18w led tube and fitting 4ft , 20w led self ballasted lamps , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping profile , 20mm pvc casing capping l bend elbow , pvc casing capping square box 4 x 4 , 20 mm ms drywall cross recessed screws bugle head , 25 mm ms drywall cross recessed screws bugle head , plasticized pvc insulation tape , pvc saddle clip 20 mmconforming , supply b22 bakelite pendant holders , pvc insulated cable and pvc sheathed 2.5 sq mm 1 core , mcb single pole 230v ac 50 hz, 16 amps 10 ka , mcb single pole 230v ac 50 hz 6 amps 10 ka , mcb distribution boards in sheet metal enclosure 8 ways , switch socket combination 6a 3 5 pin flush type , 20mm high-impact pvc junction boxes 2 way and 3 way , 25mm high grade pvc expansion wall plugs precision molded from virgin polymer , 9 inch x 11 inch 225mm x 275mm phenolic resin-bonded laminated sheets , 8 inch x 5 inch 225mm x 275mm phenolic resin- bonded laminated sheets , 5 inch x 5 inch 225mm x 275mm phenolic resin-bonded laminated sheets , bricktrowel , drop forged high grade carbon steel brick hammer , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot forged carbon steel powra , high quality heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch 300 mm , transparent flexible pvc water leveling tubes , heavy duty combination cutting pliers , non metallic fiberglass measuring tape 15mtr , wooden flat gurmala , 6mm high speed steel hss parallel shank twist drills , 8 mm high speed steel hss parallel shank twist drills , 10 mm high speed steel hss parallel shank twist drills , non metallic fiberglass measuring tape 15 m , prefabricated gel earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete. , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade 40mm dia 6 mtr long , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture ccm

CTN :45419965

11 Jun, 2026 34.85 Lacs

Puducherry - Tamil Nadu

Tender For construction of 400 bedded boys hostel building at jipmer campus, puducherry. (civil work): building portion including internal water supply lines, sanitary intallation, drainage, demolition of existing quarters & other development works. (electrical and mechanical installation): package c1: providing internal e1, c2: providing fire alarm system, c3: providing firefighting system, c4: providing cctv, c5: providing 3 nos 13 passenger lift, c6: providing 5000 lpd solar water heater, c7: providing networking, (agreement no.32/ee(puducherry)/cpwd/2023-24) sub head: risk & cost under clause 14 for structural glazing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural galzing work and extra for openable / top hung vision glass panels and providing and supplying spandrel glass panels work.subwork/packages:risk & cost under clause 14 for structural galzing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural glazing work and extra for openable / top hung vision glass panels and providing and supplying spandral glass panels work.

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

State Government

CTN :45386911

22 Jun, 2026 10.00 Lacs

Delhi - Delhi

Tender For supply of furniture items at special commissioner office, 1st floor, office block 3, east kidwai nagar, new delhi - revolving chair type-1revolving chair- size- h: 1210-1330mm, seat h: 465-585mm, d- 690mm, w- 640mm. executive hi-back chair with bio synchro mechanism spring tention auto adjusted according to weight of body. pu padded seat & pp back with mesh fabric - lumber support in built. head rest with d-direction adjustment. with 3- direction adjustment arm rest. 5-prong nylon base for stability. twin wheel heavy duty castor for easy mobility under load. quality tapestry. high density moulded pu cushion.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., executive tableexecutive table- overall size: table - lenght-2100mm x width-900mm x height-750mm, side runner -width- 1200mm x depth-450mm x height-750mm, back runner- width-1650mm x depth-450mm x height-750mm, corner unit - lenght-450mm x width-450mm x height-750mm, 3drawer pedestal size- width-450mm x depth-540mm x height-650mm, table- made of bwr ply wood laminated with good quality mm thk laminate fitted with 25mm thick mdf fascia duly deco painted. door & drawer front made of 18 mm thk bslpb. top of desk and cabinet made of 12mm thk clear float glass. product must be in compliance with drawing and as per architect instruction complete product must be knockdown type in construction.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., reception deskreception desk-1500- overall size: - w:1500mm, d:750mm / 832 mm, 1200ht top d:728 mm. top made of 25 mm thick pre- laminated particle board. pvc edge beading of 2 mm edges by through feed machine. provision of cable manager as per l.h. orr.h. side requirement. provide duct for wire management. front covered by l-shape wooden box size-h-1200 mm, w-600 mm, d-300 mmmobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides. the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., workstation on 1 seater with keyboard tray cpu trolly & mobile pedestal drawerworkstation - 1 seater with keyboard tray, cpu trolly & wooden mobile pedestal, overall size- l-1640 mm, d-820mm, h- 1215mm, working h 750mm, top made of pre laminated particle board with pvc edge beading. understructure also made up of pre laminated particle board with pvc edge beading.top- size: - 1500x750x25 mm thk. pre-laminated particle board. side edges covered by 2 mm thick pvc edge beading by through feed machine. 70mm thick tiles base partition- internal frame are made by 1.6mm thk. cold rolled close annealed powder coated sections. tiles are made by 12mm. thk. pre laminate particle board. tiles are also available in glass, fabric and steel option. frame structure are fabricated by mig/tig welding machine. tiles are fitted by high strength pvc dowel in pvc insert with transition fit. provision of slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and pole is 1.6mm thick aluminium.mobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., revolving chair type-2size-

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

State Government

CTN :45363624

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of meterial items for implementation of mgnrega scheme under rampurhat2 development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chl

Aluminium Section Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

State Government

State Government