Latest aluminium section Tenders | Government aluminium section Tenders

CTN :45457129

19 Jun, 2026 NA

Patiala - Punjab

Tender For supply of material for repair of windows of lab no .303 of civil engineering department at pup. - aluminium section, aluminium angle , aluminium clip beading m.s. hinges , neoprene rubber gasket , plain glass , aluminium tower bolt , aluminium handle , stainless steel screw , hacksaw blade (double), steel j hook

CTN :45445016

16 Jun, 2026 4.99 Lacs

North 24 Paragana - West Bengal

Tender For renovation and upgradation of two no. attached toilet with pathway, sanitary plumbing and office cubicals (aluminium section with acp board) of mini fsl building ground floor at svspa, barrackpore, wb - e-tender for renovation and upgradation of two no. attached toilet with pathway, sanitary plumbing and office cubicals (aluminium section with acp board) of mini fsl building ground floor at svspa, barrackpore, wb

CTN :45419965

11 Jun, 2026 34.85 Lacs

Puducherry - Tamil Nadu

Tender For construction of 400 bedded boys hostel building at jipmer campus, puducherry. (civil work): building portion including internal water supply lines, sanitary intallation, drainage, demolition of existing quarters & other development works. (electrical and mechanical installation): package c1: providing internal e1, c2: providing fire alarm system, c3: providing firefighting system, c4: providing cctv, c5: providing 3 nos 13 passenger lift, c6: providing 5000 lpd solar water heater, c7: providing networking, (agreement no.32/ee(puducherry)/cpwd/2023-24) sub head: risk & cost under clause 14 for structural glazing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural galzing work and extra for openable / top hung vision glass panels and providing and supplying spandrel glass panels work.subwork/packages:risk & cost under clause 14 for structural galzing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural glazing work and extra for openable / top hung vision glass panels and providing and supplying spandral glass panels work.

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

State Government

CTN :45386911

22 Jun, 2026 10.00 Lacs

Delhi - Delhi

Tender For supply of furniture items at special commissioner office, 1st floor, office block 3, east kidwai nagar, new delhi - revolving chair type-1revolving chair- size- h: 1210-1330mm, seat h: 465-585mm, d- 690mm, w- 640mm. executive hi-back chair with bio synchro mechanism spring tention auto adjusted according to weight of body. pu padded seat & pp back with mesh fabric - lumber support in built. head rest with d-direction adjustment. with 3- direction adjustment arm rest. 5-prong nylon base for stability. twin wheel heavy duty castor for easy mobility under load. quality tapestry. high density moulded pu cushion.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., executive tableexecutive table- overall size: table - lenght-2100mm x width-900mm x height-750mm, side runner -width- 1200mm x depth-450mm x height-750mm, back runner- width-1650mm x depth-450mm x height-750mm, corner unit - lenght-450mm x width-450mm x height-750mm, 3drawer pedestal size- width-450mm x depth-540mm x height-650mm, table- made of bwr ply wood laminated with good quality mm thk laminate fitted with 25mm thick mdf fascia duly deco painted. door & drawer front made of 18 mm thk bslpb. top of desk and cabinet made of 12mm thk clear float glass. product must be in compliance with drawing and as per architect instruction complete product must be knockdown type in construction.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., reception deskreception desk-1500- overall size: - w:1500mm, d:750mm / 832 mm, 1200ht top d:728 mm. top made of 25 mm thick pre- laminated particle board. pvc edge beading of 2 mm edges by through feed machine. provision of cable manager as per l.h. orr.h. side requirement. provide duct for wire management. front covered by l-shape wooden box size-h-1200 mm, w-600 mm, d-300 mmmobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides. the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., workstation on 1 seater with keyboard tray cpu trolly & mobile pedestal drawerworkstation - 1 seater with keyboard tray, cpu trolly & wooden mobile pedestal, overall size- l-1640 mm, d-820mm, h- 1215mm, working h 750mm, top made of pre laminated particle board with pvc edge beading. understructure also made up of pre laminated particle board with pvc edge beading.top- size: - 1500x750x25 mm thk. pre-laminated particle board. side edges covered by 2 mm thick pvc edge beading by through feed machine. 70mm thick tiles base partition- internal frame are made by 1.6mm thk. cold rolled close annealed powder coated sections. tiles are made by 12mm. thk. pre laminate particle board. tiles are also available in glass, fabric and steel option. frame structure are fabricated by mig/tig welding machine. tiles are fitted by high strength pvc dowel in pvc insert with transition fit. provision of slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and pole is 1.6mm thick aluminium.mobile pedestal unit plpb- size: height:650mm, width:400mm, depth:450mm top made of 18mm thick pre- laminated particle board. side, back and drawer front are made by 18mm thk. pre-laminated particle board. metallic finish heavy duty handle. superior quality makes front mounted lock. provision of casters for mobility. special drawer slides for filing drawer. other drawers on roller slides.the item should be from the approved make of durian/ godrej/ hni/ herman miller/ steelcase or equivalent make., revolving chair type-2size-

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

State Government

CTN :45363624

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of meterial items for implementation of mgnrega scheme under rampurhat2 development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chl

CTN :45125955

03 Jun, 2026 NA

Kannauj - Uttar Pradesh

Tender For bid to ras providing of facility management services - lumpsum based - educational institute; fixing glass panels with rubber beading and cleaning all classroom glass surfaces to ensure proper fitting and a clear finish; consumables to be provided by service provider (inclu..,facility management services - lumpsum based - educational institute; repairing and refixing aluminium sections to ensure proper alignment, strength, and durability of the glazing system; consumables to be provided by service provider (inclusive in c..,facility management services - lumpsum based - educational institute; fabrication, installation, and proper fixing of components with required scaffolding for safe and accurate execution; consumables to be provided by service provider (inclusive in c..

CTN :45072476

02 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras corrigendum : supply of proprietary brand of make nerolac berger asian , birla white wall care putty water resistant white cement make nerolac berger asian , ppgi roofing sheet 10 ft x 3 ft long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4 to 5 micron epoxy primer , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa , synthetic paint enamelled og colour confirming to is 5 to 2004 , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium window triple track with frame of size 1000mm x 1000mm including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , ms anchor bolt suitable for rcc work 12mm dia 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm complete all as directed , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick 1st quality confroming to is 156 to 2006 , white cement confirming to is 8042 oblique 1989 , curtain arrangement drapery and rod made of 25 mm dia , retaining wall height 8 mtr x 3 mtr 5 nos 40 mtr cement opc 43 grade packed in hdpe bag each 50 kg wt confirming to is 8112 to 2013 , coarse sand free from vegetation confirming to is 650 to 1991 reaffirmed 2008 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch confirming to is 1597 part i 1992 reaffirmed 2002 , pvc pipe 75mm dia 3 mtr long confirming to is 4985 to 2000 reaffirmed 2006 , cement 43 grade opc packed in hdpe bag each 50 kg wt conforrn to is 8112 1989 make birla gold ambuja ultratech acc jkj daimia or equivalent , coarse sand free from vegetation , coarse aggregate 40mm graded , hardcore 63 90 mm graded , brick sub class , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe foot valve and connected accessories complete all as specified , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud conforming is 13032 is 8623 double door type make havells legrand l and t , mcb spn 240 volts 32 amps make havells l and t standard , mcb sp 6 to 32 amps make havells l and t standard , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal , cable pvc insulated electric cables heavi duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty of size 1.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conducter of size 2.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , pvc casing capping of size 1 inch medium grade snow white make presto polycab finolex , pvc casing capping of size 3 oblique 4 medium grade snow white make presto polycab finolex , modular switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona , led tube light fitings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tube //bid details 2 / 70 complete make havells bajaj philips crompton , led mirror lights 1 feet 5 watts make havells bajaj philips crompton , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 6 inch x 6 inch for sockets and switches make supreme polycab finolex , pvc switch board snow white size 7 inch x 4

State Government

CTN :45341930

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate including gst and cess for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026 27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee

Aluminium Section Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government