Latest aluminium structure Tenders | Government aluminium structure Tenders

State Government

CTN :42768656

09 Jan, 2026 NA

Parganas - West Bengal

Tender For corrigendum : construction of various equipment and structure foundations for 01 (one) no 220 kv bay and other civil works at subhasgram 220 kv sub-stn, under kasba area office under kolkata tr zone wbsetcl

Central Government/Public Sector

CTN :43172828

05 Jan, 2026 22.11 Lacs

Kanyakumari - Tamil Nadu

Tender For painting of steel structure, equipment, driers as per scope of work

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :41843589

16 Dec, 2025 NA

Bathinda - Punjab

Tender For bid to ras bid to ras corrigendum : supply of mechanical engg labs and workshop equipment d d - hydraulic system trainer kit , pneumatic system trainer kit , pelton wheel turbine test rig , francis turbine test rig , brake master cylinder , balancing machine , hydrometer , diesel fuel supply system , abs system trainer , transparent truck clutch structure model , electric vehicle kit , digital pyrometer , metallurgical microscope , spark test apparatus , standard prepared readymade samples or specimen with photographs , tool kit , ampere meter , pressure gauge , compound gauge , ring spanner set , thermometer with case , swaging tool set , voltmeter , valve key , leak detector to detect cfc and hfcs , thermostatic switch etc fitted on board , model of refrigeration cycle , digital anemometer , gas charging kit , model of open type refrigerant compressor , water cooler of 100 litre capacity , split ac test rig , actual cut section model of screw compressor , actual cut section model of rotary compressor , vapour absorption refrigeration test rig , vaccum pump , ice plant trainer , sling psychrometer , thermocouple , infrared thermometer , metallic cut section models of boiler mountings , model of nestler boiler , actual cut section model of four stroke single cylinder diesel engine , model of amal carburettor , digital vernier callipar , digital micrometer , height gauge , go-no go thread plug gauge , go-no go snap gauge , go-no go ring gauge , cylinder rollers and spherical balls , slip gauges set , vernier bevel protractor , surface plate , tool maker microscope , auto collimator with stand , angle deckor with set of angle gauges , profile projector , cylindrical bore gauge , screw thread micrometer , sine bar 125mm , sine bar 250 mm , feeler gauge , wire gauge , radius gauge , comparator stand , angle plate , mechanical comparator , clinometer , gear tooth vernier , metallic try square , meteric thread pitch gauge , electronic weighing machine , digital tachometer , simply supported beam apparatus , apparatus for determining centre of gravity of regular and irregular lamina , models of different wooden joints , models of screw threads , models nuts and bolts , models of locking devices , models of keys and cotter joints , models of riveted joints , models of bearing , models of pulleys , model of drilling jig , models of different types of gears , planner , milling machine conventional , power hacksaw , welding screen , gloves , oxygen regulator with spanner , motor coil winding machine , digital clip on meter , earth leakage circuit breaker, single phase , earth leakage circuit breaker, three phase , residual current circuit breaker, single phase , residual current circuit breaker, three phase , heat convector , desert cooler , electric oven , voltage stabilizer , digital energy meter , analog meggar , digital earth tester , plier , cutting plier 8 inch , leg vice 4 inch , round die handle , tap wrench- 5 by 16th of an inch to 1 inch , pipe vice , grinder , bench grinder 0.5 hp motor , scriber 8 inches , sheet steel wire gauge , circle cutting machine , edge folding machine , foot shear machine , rivet snap 0.25, 0.5, 0.75, 1 inch , rivet set 0.25, 0.5, 0.75, 1 inch , hand stake , funnel stake , round stake , taper stake , shovel , riddle , foundry bellow , silica sand , bentonite clay type , molasses , ladle , ladle holder , oil fired tilting type furnace , sand mix muller , moulding board //bid details 2 / 109

Corporations And Associations And Others

CTN :43117081

17 Dec, 2025 67.97 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall b

Central Government / Public Sector

CTN :43098285

28 Dec, 2025 58.40 Lacs

Howrah - West Bengal

Tender For set up of lecture recording studio - equipments as per nit, sitc of camera, sitc of ptz camera ceiling mount system, sitc of hd 8-channel digital video switcher, sitc of video streaming encoder, sitc of recorder, sitc of up down cross converter, sitc of 75 intarective display with ops kit, sitc of full hd ips 24" interactive pen display unit, sitc of 16" (40.64cm) 10-point touch screen monitor, sitc of 50 inch, uh display with wall mount kit, sitc of 32 inch, uh display, sitc of 24 inch, full hd 1920 x 1080,ips panel, sitc of multiplatfrom vc iniciater enginin, sitc of desktop system for editing, sitc of abobe cc all apps education subcription for 3 yrs subscription, sitc of hdmi to usb 3 capture device, sitc of 12 channel audio mixer, sitc of 4.5 " compact desktop reference monitor, sitc of earphone, sitc of all in one digital wireless lavalier microphone, sitc of all in one digital wireless handheld microphone, sitc of dynamic vocal microphonestand, sitc of dynamic vocal microphonestand, sitc of das storage, 8-bay hardware raid enclosure, sitc of 160w led soft studio light, sitc of 4 leaf barndoor, sitc of 80w led soft studio light, sitc of 80w led soft studio light, sitc of accessories for all the lighting fixtures, sitc of lighting grid or ceiling mount, 1024 mini dmx 512 stage lighting controller, sitc of power control system, sitc of digital dimming system, sitc of wiring of studio, sitc of 3 in 1 motorized background support system with croma screen for croma set, sitc of 3 in 1 motorized background support system with croma screen for croma set, sitc of 18u full loaded 600x800 rack with pdu, installation materials, system integration, commissioning, operation & maintenance training, part a- supply of vrf equipment, supply of inverter type variable refrigerant flow system - a . 5 hp side discharge, supply of variable refrigerant flow type indoor unit, supply of four way cassette ac - 1.5 tr, supply of hi wall split ac - 1.0 tr, refjoints, cordless controller, part b- supply of low side items & installation, testing & commissioning of the vrf system, nstallation, testing and commissioning of the above vrf outdoor units ..5 hp side discharge, installation, testing and commissioning of the above vrf indoor units .hi wall split ac - 1.0 tr, installation, testing and commissioning of the above vrf indoor units four way cassette ac - 1.5 tr, supply, installation, testing and commissioning of cu. refrigerant pipes (requried as per oem design) duly insulated with 19mm / 13mm close cell elastometric nitrite rubber insulation between each set of outdoor and indoor units (vrf), supply, installation, testing and commissioning of pvc pipe medium class (for drainage of water from idu) with 6 mm thick nitrile rubber insulation., supply & laying of cu conductor scheilded flexible communication cabling between odu and idu as per oem specification (vrf). cable shall be laying through hard pvc conduit pipe, ms structure, supply & filling of first charge of refrigerant r410a, lifting & shifting charges, scaffolding charges, training cost (for a period of six months)

CTN :42809257

16 Dec, 2025 NA

Sagar - Madhya Pradesh

Tender For corrigendum : custom bid for services - providing repair and maintenance services of structure in cpp at bpcl bina refinery; this document outlines the procedure of painting works at bharat oman refineries limited. it gives requirement and recommendation for the surface preparation and the application of external painting and coating of metallic components exposed to atmospheric condition (irrespective of whether it will be insulated). this manual does not restrict the use of any improved paint system but same shall be referred to inspection dept. prior to use. this document also covers the following: painting of all new pipelines/ structures and equipment during erection. repairing/ re-painting over existing equipment/ pipe lines/ structures. internal painting of above ground storage tanks & vessels. painting/coating of underground piping.

corporations/Associations/Others

CTN :43053497

24 Dec, 2025 19.40 Lacs

Bharuch - Gujarat

Tender For work of erection of 220/66kv, 100mva transformer-3 bay with associated structure/equipment, busbar stringing, jumpering, earthing, control wiring etc at 400kv kosamba s/s under kim (am) divisionapproved under r&m plan 2024-25

corporations/Associations/Others

CTN :43053502

24 Dec, 2025 14.69 Lacs

Bharuch - Gujarat

Tender For work of erection of 220/66kv, 100mva / 160mva new transformer-4 bay with associated structure/equipment, busbar stringing, jumpering, earthing, control wiring, 220kv/66kv bus extension, etc at 220kv suva (hgis) s/s under bharuch (am) division r&m 25-26

CTN :42920067

16 Dec, 2025 NA

Auraiya - Uttar Pradesh

Tender For providing of custom bid for services - arc for painting of rotary & static equipment, piping & structure

Aluminium Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Corporations And Associations And Others

Central Government / Public Sector

corporations/Associations/Others

corporations/Associations/Others