Latest aluminium structure Tenders | Government aluminium structure Tenders

State Government

CTN :45418379

10 Jun, 2026 25.00 Lacs

Faridabad - Haryana

Tender For appointment of tech. consultant for preparation of dpr with detail of quantities of each item of work hsr based 2o23 or ns item and preparation of civil and structural design etc. for construction of bridge on budiya nala connecting sec-45 and green field.

CTN :45416250

18 Jun, 2026 NA

Kollam - Kerala

Tender For supply of structural steel - supply of structural steel, item code : 330117360 angle equal ms is 226/2062size 100 x 100 x 8 mm, "length shall be approximately 6 metres"make: sail/ jsw /jindal steel power/ vizag/ tata., item code :333217125 channel ismc is 226/2062 size: 125 mmx65 mm make: sail/ jsw /jindal steel power/ vizag/ tata.

CTN :45408458

17 Jun, 2026 NA

Delhi - Delhi

Tender For supply of furniture items in delhi vidhan sabha delhi 110054 b b - three seater sofa , pondicheery type table , console table , visitory chair , curved oval shaped conference table providing and placing in position 3-seater sofa made of well- seasoned sheesham wood frame of required thickness (25 mm / 38 mm / 50 mm as specified), and of size (l=2100mm, b=865mm and d=920mm) including arms, back, legs, etc., with proper joinery (mortise and tenon joints), complete.the seat and back to be supported with zig-zag springs / elastic webbing, and cushioned with 32 density feather foam covered with fiber layer. upholstery to be done using approved quality fabric/cotton material with neat stitching. the item includes use of ykk zippers, jute/markin lining, cotton/elastic belts, buffers, and all necessary fittings and accessories. exposed wooden surfaces to be finished with approved polish (melamine/pu) of required shade. complete in all respects including cost of materials, labour, carriage, loading/unloading, and installation as per direction of engineer-in-charge., providing and placing in position end table (pondicherry type) of approved design and size{50cm(l) x 40cm(w) x 60cm(h)}, made of well-seasoned sheesham wood (dalbergia sissoo) / solid mango wood (as specified), kiln- seasoned free from defects, with top and legs made of solid wood sections of 25 mm / 38 mm / 50 mm thickness, properly jointed using mortise & tenon / dowel joints, fixed with synthetic resin adhesive and screws, including use of l- clips/corner brackets for structural stability, all hardware of non-corrosive material, bottom provided with felt buffers/pvc stoppers to prevent floor damage, wood treated * /bid number : gem/2026/b/7589388 + /dated: 02-06-2026 ' ' / bid document 1 / 12

Central Government/Public Sector

CTN :45391936

08 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of high strength structural bolt is:3757- grade 10.9 m22 x 260 mm - 1 no , m22 nut - 2 nos with standard spring washer - 1 no per set [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

CTN :45374530

09 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.w-3.05.26.40 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods.junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt, grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

State Government

CTN :45371565

08 Jun, 2026 NA

Faridabad - Haryana

Tender For appointment of tech. consultant for preparation of dpr with detail of quantities of each item of work hsr based 2o23 or ns items and preparation of civil and structural building design etc. for construction of govt. college (co-education), sec-23, ballabga

corporations/Associations/Others

CTN :45355802

25 Jun, 2026 50.00 Lacs

Bacheli - Chhattisgarh

Tender For rate contract for transportation/shifting of heavy equipment/structural item within various location of nmdc bacheli complex chhattisgarh

Central Government / Public Sector

CTN :45347459

10 Jun, 2026 NA

Mathura - Uttar Pradesh

Tender For tender for supply of structural steel items - please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details , please refer enquiry cum offer for item details

Central Government/Public Sector

CTN :45336385

04 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of high strength structural bolt with spring washer and double nut drg. no. wd-86081-s-60 item no. 28 alt-11 or latest [ warranty period: 30 months after the date of delivery ] ]

Aluminium Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector