Latest amf control panel Tenders | Government amf control panel Tenders

Central Government/Public Sector

CTN :45743718

13 Jul, 2026 NA

Danapur - Bihar

Tender For 250 kva diesel generator set with amf control panel, power generator installation configuration as defined in cpwd general specifications for electrical works-part-vii (dg set) -fixed (power generators are permanently installed), nominal rated capacity (kva)-250, rated engine power(kwa)- 110% of the required powered at stp (standard temperature pressure) i.e equal ? to (nominal rated capacity (kva) of power generator any auxiliary power consumption by the power generator) x power factor (0.8)/alternator efficiency , type of governor-electronic, rated rpm of engine(rpm)-1500, fuel-high speed diesel (hsd),control panel-amf control panel , installation- with installation-inclusive in the scope of supply, warranty on complete power generator/dg set-24 months , no . of phase- 3, number of cylinders-6,starting voltage-24, type of alternator-brushless, fuel tank capacity- 600 liter, battery capacity(ah)-100,no. of battery2, testing report available for (test/approval)-type approval certificate for the specified rating of the power generator from any of the designated agency authorized by cpcb,cop certificate for engine type test report and endurance test report for engine as per is :10001 latest/ls:10002 latest,type test report for alternator as per is : 13364 (part-1) latest/is: 13364 (part-2) latest to prove conformity to the specification , make-cummins power, greaves, kirloskar or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546255

13 Jul, 2026 NA

Patna - Bihar

Tender For corrigendum : 250 kva diesel generator set with amf control panel, power generator installation configuration as defined in cpwd general specifications for electrical works-part-vii (dg set) -fixed (power generators are permanently installed), nominal rated capacity (kva)-250, rated engine power(kwa)- 110% of the required powered at stp (standard temperature pressure) i.e equal ? to (nominal rated capacity (kva) of power generator any auxiliary power consumption by the power generator) x power factor (0.8)/alternator efficiency , type of governor-electronic, rated rpm of engine(rpm)-1500, fuel-high speed diesel (hsd),control panel-amf control panel , installation- with installation-inclusive in the scope of supply, warranty on complete power generator/dg set-24 months , no . of phase- 3, number of cylinders-6,starting voltage-24, type of alternator-brushless, fuel tank capacity- 600 liter, battery capacity(ah)-100,no. of battery2, testing report available for (test/approval)-type approval certificate for the specified rating of the power generator from any of the designated agency authorized by cpcb,cop certificate for engine type test report and endurance test report for engine as per is :10001 latest/ls:10002 latest,type test report for alternator as per is : 13364 (part-1) latest/is: 13364 (part-2) latest to prove conformity to the specification , make-cummins power, greaves, kirloskar or similar. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45525068

06 Jul, 2026 41.51 Lacs

Raichur - Karnataka

Tender For corrigendum : routine monitoring / preventive maintenance / breakdown / emergency /regular servicing of pneumatic cylinders, solenoid valves, limit switches & pressures switches pertainsto units-5,6 &7 mill reject handling system(mrhs).operation and maintenance of dense phase mill reject handling systemof unit-8.the work involves-a)operation and maintenance of dpmrhs plc systemb)i&c maintenance works of air compressor.c)servicing/re-calibration of solenoid valves,limit/proximity switches & pressures switches etc.routine monitoring/maintenance of spm analyzer systemspertains to unit-5 to 8.the work involves-a)operation and maintenance of dpmrhs plc system.b)i&c maintenance works of air compressor.c)servicing/re-calibration of solenoid valves, limit/proximity switches & pressures switches etc.routine monitoring/maintenance of spm analyzer systems pertains to unit-5 to 8.the work involves-a)cleaning/servicing of transmitters & reflector units and blower filters of spm analyzers, pertains to units-5 to 8.b)carrying out maintenance works under the supervision of i&c engineerregular monitoring/checking healthiness of unit-7&8 coal bunker level monitoring systems.routine maintenance of bunker level monitoring systems.the work involves- a) cleaning/checking of 3d level sensors.b) cleaning/checking healthiness of local control panel at bunker floor.c) ensuring healthiness of signals to control room pc,dcs&chp control room digital indicators.regular monitoring/maintenance of hfo tanks level measurement systems.the work involves-a)cleaning/checking healthiness of radar level transmitters installed at hfo tanksb)cleaning/checking healthiness of local digital indicators installed at foph.c)cleaning/checking healthiness of plc unit installed at unit control room-7.the nature of work is round the clock maintenance.the cleaning/servicing and maintenance works of all the above mentioned systems shall be carried out during units aoh period.the required t&p and ppe for carrying out maintenance works shall be arranged by the contractor/agency itself.

State Government

CTN :45699085

25 Jun, 2026 86.44 Lacs

Rajgir - Bihar

Tender For supply, installation, testing and commissioning of 400 kva, 3 phase, 415v water cooled silent type diesel generator set including all accessories with amf control panel at pandu pokhar - rajgir and papharni talab - mandar, banka.

CTN :45684336

09 Jul, 2026 1.12 Lacs

Midnapore - West Bengal

Tender For supply, installation, commissioning testing of control panel with controller-transmitter in connection with hydro-pneumatic pumps at spmsh.

Central Government/Public Sector

CTN :45697889

16 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of supply, installation , testing and commissioning of 58.5 kva diesel generating sets, three phase, 415v with amf control panel type of engine cooling :liquid cooled, rated rpm of engine(rpm): 1500, type of alternator : brushless, class of insulation: h,battery capacity(ah) : 120 , no of batteries: 1 or more,cpcb-iv+ emission norms,insulation classclass-h,starting system-electric start,standardscpwd specifications, wr approve make list attached. supply and commissioning of battery operated platform truck, load capacity-4000 kg. make/model :-josts / godrej / voltas / jaldoot or equivalent. hand operated pneumatic barrel pump, dual directional pump of inlet 01 inch, deliver 05 liters in 20 turn, wetted components steel, cast iron, nbr, complete with 01 nos 2meter long flexible delivery pipe. suitable to barrel capacity 210/220 liter brand: prachand, lubi, toss, kingom, lavaka, skope, (detailed description/specification as per product # 1 of gem contract no. gemc-511687710211457 dt.19/04/2026 , two wheeler tyre with tube (bullet motorcycle) size 110/90-18 m/c 61p and 90/90-19 m/c 52p brands like mrf, ceat or similar. tyre with tube for mp-43-g-1645 vehicle model no. 215/75 r15 make/brand : ceat, jk, mrf or as similar. tyre with tube for bullet motorcycle size-(90/90-19 m/c 52p), make-mrf. steel radial tyre with tube for departmental vehicle make- mrf/apollo/ceat only with warranty as per manufacturer and enclosed annexure-l - 1. ashok leyland dost tyre size 185 r14 (185mm section width for a 14-inch rim). steel radial, ply rating-10pr, for 02 vehicles with stepney. 2. mahindra maxx, tyre size7.00 r 15 (7.00 inch section width, 15-inch rim diameter). steel radial, ply rating-12pr, for 01 vehicle with stepney. 3. eicher truck, tyre size 8.25-20 (20-inch rim diameter) steel radial, ply rating-16pr, for 01 vehicle with stepney.

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

CTN :45476980

01 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For corrigendum : purchase of pneumatic trainer board - pneumatic trainer board, specification: type: modular pneumatic training system working pressure: 2 8 bar components: frl unit with pressure gauge (0 10 bar) 3/2 valve 2 nos 5/2 dc valve 2 nos flow control valve 2 nos double acting cylinder 1 no single acting cylinder 1 no tubing: pu tubes with push-fit connectors panel: rigid modular panel with mounting slots power supply: 24v dc (for solenoid valves)modular training panel with sturdy metal frameall cylinders, control valves, limit switches and other accessories should be kept separately and should not be fixed permanently in the board/ stand.

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government/Public Sector

CTN :45672695

15 Jul, 2026 22.43 Lacs

Jharsuguda - Odisha

Tender For supply of afdsss system for hemms c c - dry chemical powder _mono ammonium phosp_part no.ac42511001 or acfz31001 , co2 expellant gas cartridge 300 gm for z_part no.acfz11002 , dust cap for nozzle for zone wise afdss_part no.acfz14010 , rapture disc assembly for zone wise afds_part no.ac505032 or acfz33008 , safety clip for zone wise afdss_part no.acfz12007 , co2 expellant gas cartridge 200 gm_part no.ac501025 , sensor cable rates per meter_part no.ac505027 , pilot cylinder assembly for zone wise af_part no.acfz12004 , horn unit for zone wise afdss_part no.acfz22002 , harness cable assembly with connector fo_part no.acfz21001 , harness cable for sensor cable_part no.ac505033 or acfz42002 , zone selector switch for zone wise afdss_part no.acfz69222 , control panel assembly for two zone syst_part no.acfz29222 , actuation device for zone wise afdss_part no.acfz11001 , cylinder cap with pneumatic and manual o_part no.ac502023 or acfz32002 , sensor end assembly for zone wise afdss_part no.acfz23003 , nozzle conical _brass_ for zone wise afd_part no.acfz13008 , lugs with fuse for zone wise afdss_part no.acfz24006 , hp hose assy. 1by2inch 3feet long for zone wise_part no.acfz19203 , hp hose assy. 1by2inch 4feet long for zone wise_part no.acfz19204 , hp hose assy. 1by2inch 5feet long for zone wise_part no.acfz19205 , hp hose assy. 1by2inch 7feet long for zone wise_part no.acfz19207 , hp hose assy. 1by2inch 9feet long for zone wise_part no.acfz19209 , hp hose assy. 3by4inch 5feet long for zone wise_part no.acfz59305 , hp hose assy. 1inch 12feet long straight 90 fo_part no.acfz59412 , hp hose assy. 1inch 9feet long straight 90 for_part no.acfz59409 , stickers set for afdss for zone wise afd_part no.acfz25008 , hp hose assy. 1by4inch 9.5inch for zone wise af_part no.acfz18109 , hp hose assy. 3by4inch 7feet long for zone wise_part no.acfz59307 , hp hose assy. 3by4inch 9feet long_part no.ac506056 , hp hose assy. 1by4inch 20feet long_part no.ac506039 , hp hose assy. 1by4inch 33inch long_part no.ac506037 , hp hose assy. 1by4inch 29inch long_part no.ac50603729 , stand for 30 kg. cylinder and cartridge mo_part no.acfz39830 , mounting block for hoses_part no.ac507065 , dcp cylinder 15 kg_part no.ac502014 , control panel asm. for two zone system_part no.acfz29222 , sensor cable_part no.ac505027 , dry chemical powder_part no.ac42511001 or acfz31001 , co2 expellant gas cartridge 300 gm_part no.acfz11002 , actuation device_part no.acfz11001 , pilot cyl assy_fbymanual operation_part no.ac502018 , harness cable assembly with connector_part no.acfz21001 , rupture disc assembly_part no.ac505032 or acfz33008 , expellant gas cartridge 200gm_part no.ac501025 , safety clip_part no.acfz12007 , hp hose assy_1by2inch 4 long for zone wise_part no.acfz19204 , hp hose assy_1by2inch 5 long for zone wise_part no.acfz19205 , hp hose assy_1by2inch 7 long for zone wise_part no.acfz19207 , dry chemical powder _per packet 5kg__part no.ac5040245 , expellant gas cartridge 300gm_part no.ac501026 , actuation device_ solenoid valve assy_part no.ac503030 , rupture disc assembly_part no.ac505032 , control panel assly_part no.ac505030 //bid details 2 / 44

Amf Control Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector