Latest angel bar Tenders | Government angel bar Tenders

Central Government/Public Sector

CTN :44246604

01 Jul, 2026 30.70 Crore

Chandrapur - Maharashtra

Tender For bid to ras bid to ras corrigendum : supply of m s sheet as per is 1079 (unit - mass) , steel plates for structural and general engineering purposes (v2) , ms flat as per is 2062 50isf8 , hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 , rs joist / ms beam/ column 116mm x100mm , cgi ms sheet as per is 277 0. 63mm , ms rail 30lbs/yd , high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786

State Government

CTN :45580595

02 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786 (q2)

CTN :45718448

09 Jul, 2026 NA

East Sikkim - Sikkim

Tender For supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires

State Government

CTN :45680955

14 Jul, 2026 14.00 Lacs

Balodabazar - Chhattisgarh

Tender For supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786 (q2)

Central Government/Public Sector

CTN :45698072

06 Jul, 2026 44.29 Lacs

Dhanbad - Jharkhand

Tender For supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786,m s sheet as per is 1079 (unit - mass),m s sheet as per is 1079 (unit - mass)

CTN :45297389

27 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For bid to ras supply of high strength deformed steel bars and wires for concrete reinforcement (v2) isi marked to is 1786 (q2)

CTN :45646843

29 Jun, 2026 61.61 Lacs

Thrissur - Kerala

Tender For supply of materials under mgnregs for thekkumkara gp - quarry waste, stone aggregate(single size); 40mm nominal size, stone aggregate(single size); 20mm nominal size, stone aggregate(single size); 10mm nominal size, coarse sand (zone iii), portland cement, stone for masonry work, twisted steel/deformed bars

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

CTN :45606341

13 Jul, 2026 52.76 Crore

Shimla - Himachal Pradesh

Tender For annual rate contract for the supply of high strength deformed steel bars for concrete reinforcement (isi marked).

State Government

CTN :45586913

17 Jul, 2026 3.72 Crore

Ambala - Haryana

Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibre optic cable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

Angel Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government