Latest artificial grass Tenders | Government artificial grass Tenders

Central Government/Public Sector

CTN :40132341

19 May, 2025 NA

Bhusawal - Maharashtra

Tender For supply of paint enamel synthetic exterior finishing, traffic green

CTN :40133384

06 May, 2025 NA

Sundergarh - Odisha

Tender For supply of water hose of synthetic thermoplastic polymer, size: 31.5 m.m.nb x 15 mtrs. length. material and specification : icf specn. no. icf/md/spec-112, issue status 01, rev. 01 with amendment slip no. 02 dt. 16.05.2007.

CTN :40141346

17 May, 2025 NA

Dehradune - Uttarakhand

Tender For supply of construction of synthetic surface volleyball court with poles and allied accessories

Central Government / Public Sector

CTN :40142546

14 May, 2025 15.66 Lacs

Lakhimpur Khiri - Uttar Pradesh

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide zinc chrome, priming (v2) as per is 2074 (q3) , thinner for epoxy paints (bhel) (q3)

CTN :40134730

16 May, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of synthetic enamel signal red

Central Government/Public Sector

CTN :40135510

16 May, 2025 NA

Khurda - Odisha

Tender For supply of pvc flexible water hose 1 inch , battery aa one point five volt , biodegradable polythene film length 112 width 18 , cans plastic 20 ltrs , bag gunny , doormat foot mat mat floor synthetic , torch cell one point five volt std size , pencil cell one point five volt , m seal , safety gloves cloth , abrasive paper 230 mm x 280 mm , paper napkin , photocopier paper a3 , candle wax , teflon tape , tape insulation 25 mm steel grip , wonder tape 2 inch , anti rust spray , tape transparent 2 inch , dvd , tape transparent 1 inch , envelope cloth coated 12x16 inch , envelope cloth coated 10x14 inch , envelope cloth coated 9x12 inch , envelope 10x14 inch , envelope 6x12 inch , envelope 4x10 inch , paint brush 2 inch , mosquito repellent gel odomos , urinal screen mats , spray hand liquid insecticide , mosquito repellent machine with liquid , refill for automatic air freshner 250 ml , rat sticking gel , distilled water , napthalene balls , plastic mug , hand towel , steel cleaning liquid , spin mop set , wiper long handle , lime slaked , geru red , cotton rags , cleaning bar for utensils 500 gms pack , blue laundry , brush with long handle , scrubber with handle , abrasaive cleaning pad scrabber pad , cotton waste , brush sweeping hand , super spin mop refills , broom country , polish metal brass , duster cloth , cleaner white toilet harpic , sponge cloth , varnish , distemper white bid number/ & ( * ) : gem/2025/b/6163190 dated/ + : 25-04-2025 bid document/ 2 2 1 / 45

CTN :40135542

16 May, 2025 NA

Ahmedabad - Gujarat

Tender For supply of pvc bends , 110mm dia swr pvc bends , 75mm dia swr pvc pipe clamps , 110mm dia swr pvc pipe clamps , size 3 hydraulic door closer bearing isi mark to carry door a width upto 1000mm , engine oil 2t , turpentine oil , water thinnable cement primer alkali resistant , zinc chromate primer yellow , aluminium paint , synthetic enamel paint , road marking paint for asphalt surface water based , acrylic exterior emulsion paint , super acrylic emulsion paint internal works , crack filler in form of paste , wire brush for painting activities , soft brush for painting activities , wall putty white 20 kg per packet , 6mm commercial plywood with commercial ply on both faces , 12mm commercial plywood with commercial ply on both faces , coarse river sand , water proofing material conplast wl , wire nails , tile or stone fixing adhesive for granite or vitrified tile , stainless steel fly proof mesh grade 304 , 500 ml capacity anchor bolt fixing chemical injectable mortar , 25 kg bag capacity the fenvel of dp insecticide fenvelarate 0 point 40 percentage dp , single phase welding machine 220 amp , ewc pan with p trap , ewc pan with s trap , iwc orissapan with p trap , wash hand basin 550x400mm , plastic seat and cover , cp fittings 15mm brass stopcock , cp fittings 15mm brass stopcock concealed , 15mm swivel type shower with cp shower arm , coat and hat hook double type , towel rail 25mm dia 600mm long , 32mm bottle trap with wall flange , open type flush valve 25mm , long necked bib tap 15mm , rubber sheet 3mm thick , 15mm n b 1 point 23 kg per m gi medium grade pipes bearing isi mark conforming to is 1239 , 15mm n b threaded pvc pipes schedule 80 conforming to astm d 1785 , 20mm n b threaded pvc pipes schedule 80 conforming to astm d 1785 , 50mm n b threaded pvc pipes schedule 80 conforming to astm d 1785 , door cap pvc 75mm , door cap pvc 110mm , solvent cement 250ml , 15mm dia hexagonal nipple , ptmt bib cock 15mm , ptmt bib cock long body and flange 15mm , ptmt stop cock 15mm dia male threaded , ptmt pillar cock , ptmb ball cock and hd ball 20mm dia , ptmt shower arm with flange 225mm , pvc health faucet 1 point 2 m length , pvc connection pipe 18 inch , upvc ball valve 40 mm , extension nipple 15 mm , upvc brass tee 15mm , upvc reducer socket 25 x 20 mm , upvc reducer socket 20 x 15 mm , upvc elbow 25 mm , upvc reducer elbow 25 x 15 mm , upvc reducer tee 32 x 25 mm , upvc coupler 40 mm , upvc reducer socket 40 x 25 mm , upvc reducer socket 40 x 32 mm , upvc fta 15mm , upvc elbow 15mm , 15 mm gi clamp , 20 mm gi clamp , 25 mm gi clamp , 32 mm gi clamp , 40 mm gi clamp , 75 mm gi clamp , 110 mm gi clamp , bombay nail 2 inch , bombay nail 4 inch , waste pipe roll length 30m , wash basin socket , 35 x 8 mm screw , 32 x 8 mm screw , 19 x 6 mm screw , 30 x 7 mm screw , 70 x 1 mm nail without head , nail 2 inch , pipe wrench 14 inch , pipe wrench 18 inch , screw driver , plier , hammer with wooden handle 1 point 35 kg , chisel , adjustable spanner

CTN :40135848

17 May, 2025 NA

Hooghly - West Bengal

Tender For supply of other section , m and l for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10 cm including preparation of surfaces all as specified and as directed. , m and l for three coats of white washing on new plaster and unplaster of wall surfaces including preparation of wall surfaces complete all as specified and as directed. , s and f steel stainer for sewage sumps of different pores as specified and directed by engineer in charge , suppy of stand by non clogging pump of 5hp 1520 lpm with all accessories and fittings as specified and directed by engr in charge , heavy duty double tank type chemical dosing system consist of service tank 150 ltrs capacity with dosing system plunger type , s and f gi strip 25x4mm as earthing lead bolts nuts checknuts and washers all as specified and directed , material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick , pumping out sewage water from the existing sumps of sewage plant pump house with the help of non clogging of pump any kind capacity of pump set not less than 2160 lpm , lifting the non clogging pump set electrically operated by 15hp 20 hp 3 phase motor incl column pipe line shaft etc , dismantling of non clogging submersible pump of capacity 15hp 20 hp for comprerhensive maintenance and if required taking out burnout old winding from the stator , lowering complete the non clogging pumping set and reflixing the motor carefully including connection and testing , pumping out sewage water from the existing sumps tanks of stps mbbr technology with the help of non clogging , cleaning of 1.2 mld sewage treatment plant after pumping out sewage water from the existing sumps , lifting the non clogging submersible pump set electrically operated by 3.7 hp 3 phase motor incl column pipe line , dismantling of non clogging submersible pump of capacity 3.7 hp and taking out burnout winding from the stator of motor and rewinding with pvc copper wire , dismantling of electric sewage induction motor 3.0 hp ac 3 phase 415 volts from site after disconnecting from pump , dismantling non clogging pump set of centrifugal type 3.0 hp induction motor ac 3 phase 415 volts , dismantling of electric induction blower motor 5.0 hp ac 3 phase 415 volts for comprehensive maintenance from site after disconnecting , dismantling of electric induction blower motor 30.0 hp ac 3 phase 415 volts for comprehensive maintenace from site after disconnecting from blower electric connection , material and labour for pcc 1 3 6 type c2 using 40mm graded stone aggregate for foundation etc , m and l for taking out comprehensive maintenance of existing unserviceable air blower of any make of capacity 125 cubic hr to 188 cubic hr with taking out of electric cable , supply only gear oil ep 90 complete all as specified and as directed by engineer in charge. , supply only air filter suitable for existing one complete all as specified and as directed by engineer in charge. , supply only belt as per existing model complete all as specified and as directed by engineer in charge. , supply only bearing as per existing complete all as specified and as directed by engineer in charge. , supply only set of rotor with hub as per existing model complete all as specified and as directed by engineer in charge. , m and l for finding out defect of stps panel and taking out burnt interconnection wiring including u.s and serviceable component for re use including rewiring of panel , supply and fix in repairs flexible flat pvc copper couductor stranded submersible cable cores 1100 volt grade 4 sqmm 3 bid details/ 2 / 41 core , supply and fix in repairs flexible flat pvc insulated pvc couductor stranded submersible cable cores 1100 volt grade 10 sqmm 3 core , s and f round strand steel wire rope dia 12 mm and connected clamp nut bolts fixed complete all as specified and as directed by engineer in charge. , s and f submersible pump ful

CTN :40135905

15 May, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech, acc,jk or dalmia under job no 2504 ags pd as per store list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make- tata,sail,jsw , water proofing compund conforming to is 2645-2003 make- pidilite,dr fixit,fevicol , quick setting compound make- pidiite,quick fix,fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata,sail,jsw , cement based paint snowcem make-berger,asian,nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian,berger,neroloc , synthetic paint enamelled og conforming to is 5-2004 make- asian,berger,nerolac , thinner make-nerolac,berger,asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make- tata, sail,jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata,sail,jsw , prefeb mild steel door of size 750x 1800mm double shutter, outer frame made out of isa 40x 40x6mm and door shutter frame of make-tata,sail,jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata,sail,jsw , loop holes 780 x 300 mm make-tata, sail,jsw , loop holes 1000 x 300 mm make-tata, sail,jsw , loop holes 1250 x 300 mm make-tata, sail,jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm make-tata, sail,jsw as per store list , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mmas per store list , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make-jindal, tata, kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make- presto,polycab, finolex , charcoal , salt bid details/ 2 / 34

CTN :40136684

05 May, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

Artificial Grass Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector