Get complete information related to latest Artificial Grass Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Artificial Grass Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Artificial Grass Tenders.
Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - providing and laying of base course of floors, providing and laying cement concrete flooring, providing and applying white cement based putty of average thickness, finishing walls with water proofing cement paint, finishing walls with acrylic smooth exterior paint, painting on g.s. sheet with synthetic enamel paint, repairs to plaster, removing white or colour wash by scrapping and sand papering and preparing the surface smooth.
Tender For barana block: panipat panchayat: barana dist.: panipat annual maintenance work for water supply - painting the wooden / metal surface with synthetic enamel paint, finishing walls with acrylic smooth exterior paint, repairs to plaster, removing white or colour wash by scrapping and sand papering and preparing the surface smooth, painting with synthetic enamel paint.
Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit
Tender For corrigendum : supply of toughened glass visitor segregation system 10 mm , toughened glass access door 8 mm , door hardware channel rollers handles and accessories , frosted privacy film on glass surface , mdf finishing components and rafters , aluminium door with hydraulic door , artificialgrass foot mat 40 mm , four seater work station rectangular , acrylic appointment board , installation fitting commissioning consumables and finishing
Tender For corrigendum : tn-25151 supply of miscellaneous rubber items at kstps, kota. - "white rubber insertion sheet made from superior quality natural/ synthetic/ blend rubber free from surface defects, porosity and grit conforming to is6381/1979. the reinforcement fabric used for white rubber insertion sheet should with stand minimum area", 3.0 mm , 5.0 mm, love-joy spider set in following sizes:, l-50, l-70, l-75, l-90, l- 95, l- 100, l - 110, l - 150, l-190, l-99/100, l-225, l-226, l-276, soft seal for 600 nb b/f valve make-m/s i/l ltd. od-577, id-522 mm.pcd-548 mm. hole dia 9 mm. no. of hole-20 th-10.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , nitrile rubber gasket for 300 nbci/ ms pipe single side tapered id-320, od-345, h-10/28, th-4/12.5 mm. , nitrile rubber gasket for 150 nb wet slurry line single side tapered id-166 mm. od-190 mm. h-22/35 th-5/12 mm. , rubber coupling bush for sump drain pump id=22 mm, od=38, l=40 mm, rubber pad for love joy coupling c-280 , victaulic coupling rubber gasket -18l, victaulic coupling rubber gasket -18h, "victaulic coupling rubber gasket -20l", victaulic coupling rubber gasket -20h, seal kit set 3/8" 3way solenoid valves as per sample one set contains 6 pieces, vibration damping rubber pads/block for stacker reclaimer#1 size od=210 to 200(tapper).length=125 mm centre hole dia.=85 mm (sample piece available at site), neoprene rubber coupling pad size 40x40x20 mm, neoprene rubber brush size (idxodxlength ), 20x38x40, 32x50x55, 35x55x60, rubber cushion pad c-280, tyre coupling tc-011, tyre coupling tc-019, tyre coupling tc-013, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x2.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x4.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x6.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x8.00 mm, dresser coupling rubber gasket for16'' for feed pipe, dresser coupling rubber gasket for36'' for coal valve gate raw coal feeder, gun metal rubber bush for feeder drive nitrile rubber gun metal bush id 22.5mm ,od 32mm,length 40 mm rubber bush od 44.5 mm ,length 40 mm, rock well coupling gasket 20l, enddoor gasket for stg-i (1 set consisting 2 nos. rare and 2 nos.front ), enddoor gasket for stg.-ii,iii,iv,v consisting (2 nos. rare and 2 nos.front ), rubber spider set :, sw-rrs 190/140, sw-190, rubber coupling bush for fd/pa fans of stage-i as per drawing , rubber coupling bush for fd/pa fans of stg-ii as drawing, rubber coupling bush for fd/pa fans of stg- iv/v as drawing, rubber gromet gasket for id/pa fans as per drawing u#3 to 7, victaulic coupling rubber gasket size 22l made of silicon rubber for pf pipe of u#5, 6&7. tech. specs: max. temp. 160-180 degree. a industrial grade scale, soft seal for 400 nb b/f valve make-m/s i/l ltd. od-357, id-307 mm. pcd-323 mm. hole dia 8 mm. no. of hole-16 th-9.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , rubber pad for love joy coupling swq-280/140
Tender For corrigendum : supply of miscellaneous rubber items at kstps, kota-white rubber insertion sheet made from superior quality natural/ synthetic/ blend rubbe free from surface defects, porosity and grit conforming to is6381/1979. the reinforcement fabric used for white rubber insertion sheet should with stand minimum area3 mm5 mm.love-joy spider set in following sizes:l-50l-70l-75l-90l-95l-100l-110l-150l-190l-99/100l-225l-226l-276soft seal for 600 nb b/f valve make-m/s i/l ltd.od-577, id-522 mm.pcd-548 mm. hole dia 9 mm no. of hole-20 th-10.0 mm. material- nitrile rubbeshore hardness 60 + 5 on 'a' scale.nitrile rubber gasket for 300 nbci/ms pipe single side tapered id-320, od-345, h-10/28, th-4/12.5-mm.nitrile rubber gasket for 150 nb wet slurry linesingle side tapered id-166 mm. od-190 mm. h-22/35 th-5/12 mm.rubber coupling bush for sump drain pump id=2 mm, od=38, l=40 mmrubber pad for love joy coupling c-280victaulic coupling rubber gasket -18lvictaulic coupling rubber gasket-18hvictaulic coupling rubber gasket -20lvictaulic coupling rubber gasket -20h
Tender For corrigendum : providing and laying synthetic acrylic sports flooring over existing concrete surface for practice volleyball and lawn tennis wall at iit ropar