Latest backrest lock Tenders | Government backrest lock Tenders

State Government

CTN :41052738

04 Aug, 2025 67.93 Lacs

Gandhinagar - Gujarat

Tender For supply of spares for bottom ash handling system of ash plant - unit no.3, 4 & 5 at gandhinagar tps. - shoulder bolt with lock plate for assembling part no.8 (part no.9) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., cross brace (part no.11) for 24" x 24" feed gate assembly of bottom ash system unit- 3 and 4 as per dwg. no. 8743-2b-571., resilient gate face p.no-2,for bottom ash hopper,drg 8743/2b/571, shoulder bolt with lock plate for assemblying part no.8 (part no.9) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, cross brace (part no.11) of 24x24 squire bottom feed gate dwg.no. 95p10-t-2b-570 of unit no. 5, gate face 1 set consists of ss:316 gate face with m.s back up plate of 24x24 squire bottom feed gate of unit no. 5, cam segment p.no-1 for 33"x30 excen crusher, front wear plate/anvil plate of 33" x 30" clinker crusher / grinder assembly for unit-3and4 (1 set equals to 3 nos.)., back wear plate/plate combing (part no. 6) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 3 nos.)., side wear plate(part no. 8) of 33" x 30" clinker crusher / grinder assembly as per dwg. no. 8743-2b-582(rev-1) for unit-3 and 4 (1 set equals to 2 nos. left hand and 2 nos. right hand wear plate)., shaft with shaft structure and shaft sleeve of 33" x 30" clinker crusher / grinder assembly for unit-3 and 4., 33"x30" single roll clinker crusher / grinder complete assembly without drive arrangement, fluid coupling, chain drive and driven sprocket as per dwg. no.8743-2b-582(rev-1) for unit-3and4, feedsump below clinker crusher for unit no.3 and 4, roll (cam segment) 1 setequals to 8 nos. cam segment of single roll crusher for unit no. 5, front wear plate/anvil plate (part no.3) 1 set consists of 3 nos b front wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, back wear plate/plate combing (part no.6) 1 set consists of 3 nos back wear plate of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, side wear plate (part no.8) 1 set consists of 2 nos. left hand and 2 nos right hand type of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, shaft with shaft structure with shaft sleeve(part no.2 and15)for clinker grinder., bearing support (part no.8) of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, single roll crusher complete assembly without drive arrangement,fluid coupling,chain,drive and driven sprocket of single roll crusher dwg.no.95p10-2b-582 (rev-1) for unit no. 5, feed sump of bottom ash system of unit - 5 as per drawing no. 95p10 - t - 1b - 711, complete assembly of feed gate housing with feedgate, access door for unit no.3 and 4, bearing housing of dcips make 33" x 30" clinker crusher/grinder, locking plate for 600 dia. round access door for bottom ash hopper, nozzle with ceramic tip(part no. 2)tip size- 36 mm of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), aligning ring(part no. 10)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), half clamp(part no. 11)of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 9" flange clamp half (part no. 18) of 8" jet pulsion pump assembly for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1) 1 set equals to 2 nos., 8" jet pulsion pump complete assembly without tail pipe for bottom ash system of unit-3 and 4 as per dwg.no.8743 - 2b - 591(rev-1), nozzle with ceramic tip size 34 mm of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, aligning ring (part no.10) of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, half clamp (part no.11) 1 setequals to 2 nos of jet pump for b.a system dwg.no. 95p10-2b-591 (rev-1) for unit no. 5, 9" flange clamp half (part no

CTN :41045728

31 Jul, 2025 NA

Pathankot - Punjab

Tender For supply of gasket lub cooler , gasket lub filter head , air filter outlet assy , oil filter assy , fuel pre filter assy , air filter element , taper roller brg , oil seal , wiper motor 17w 24v , assembly door lock rh , sealant liquid gasket , assy fuel pre filter , belt v ribbed , pump fuel transfer , air filter outlet , assy shaft merlin , assy cross joint , gear lever kit , re kit cyl mnr , main line switch

CTN :41045368

01 Aug, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of spares of b veh d d - fly wheel assembly , door lock assy , roller bearing , clutch serbo repair kit , chain spocket kit , clutch plate , air filter assy , element fuel filter , caliper pad , ac belt , coolant pipe hose , hose assy air outlet

CTN :41055693

21 Aug, 2025 NA

Howrah - West Bengal

Tender For supply of lock pin for double rotary lock lift assembly with cbc of the coaches. drawing no. : s. e. rly's drg. no. : src/adme/store/lock pin-drawing no- 2012-13/2/src. material and specification : e n 8 steel.. [ warranty period: 30 months after the date of delivery ]

CTN :41056518

04 Sep, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of set of breather valve assly. complete (1) pipe 1/2" bsp breather elgi pt. no. 00041361 8 or saber dais pt. no. 01-101-117 : 01 no. (2) reducer 1"x1/2" bsp breather elgi pt. no. 00043665 0 or saber dias pt. no. 01-101-118: 01 no. (3) breather valve assembly elgi pt. no. a020030 or sab er dias pt. no. 01-101- 119: 01 no. (4) lock nut 1/2" bsp elgi pt. no. 000466020 or saber dias pt. no. 01-101-120 [ warranty period: 30 months after the date of delivery ]

CTN :41057030

28 Jul, 2025 NA

Bokaro - Jharkhand

Tender For supply of lock lift lever assembly for up-graded ht-cbc.drawing no. : rdso's drg. no. sk. 6272 4 alt. 31, item nos. 5, 6,7,16 & 17.material and specification : rdso's spec. no. wd-70-bd-10, (rev. 4 ) of november 2024. [ warranty period: 72 months after the date of delivery ]

CTN :41055630

22 Jul, 2025 50.0 Thousand

Jammu - Jammu And Kashmir

Tender For supply of door regulator left hand , engine mounting pad , suspension bush kit , steering lock assembly , repair kit for accessories , vane pump , regulator assembly left hand , brake fluid container , propeller shaft , field coil assembly , seal kit , main leaf

CTN :40770389

14 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of lv7 maruti 33920m80c20 controller assy epi , lv7 maruti 09471m12055 bulb 12v 1.4w , lv7 maruti 6240-004891 bulb 12v 21w , lv7 maruti 82202m82c30 latch assy door lh , lv7 maruti 31313m75j00 starter kit , lv7 maruti 15410m830a1 filter assembly fuel , lv7 maruti 09816m00083 wheel wrench , lv7 maruti 31100m80c00 motor assy starting , lv7 maruti 15100m830a1 pump assy fuel , lv7 maruti 69180m79501 lock side window lh , lv7 maruti 29650m83001 mounting rh rear , lv7 maruti 2530- 014013 end steering tie rod , lv7 maruti 67790m80034 hinge rear gate , lv7 maruti 35662m80000 lens turn signal , lv7 maruti 23266m83002 arm clutch release , lv7 maruti 5523m78410 spring pad , lv7 maruti 37610m83011 switch assy backup lamp , lv7 maruti 12810m71c32 tensioner comp timing belt , lv7 maruti 82591m80060 handle lock , lv7 maruti 5340-135133 handle door inside rh , lv7 maruti 09926m48010 universal joint assembler , lv7 maruti 38500m78122 horn assy high

Central Government/Public Sector

CTN :40692767

19 Jul, 2025 NA

Mandal - Gujarat

Tender For corrigendum : supply of warman pump spares > - model: 1.5/1 bah, metal/ rubber /expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, gland ( 2 piece), lantern ring, volute frame seal, frame plate, volute liner, discharge joint ring, impeller o ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), frame plate liner insert, impeller, cover plate bolt& nut (1 set consists of 4 nos), cover plate, intake joint ring, gland clamp bolt (1 set consists of 2nos), gland bolt, nut & washer (1 set consists of 2nos), gland packing (1 set consists of 2 nos), neck ring, expeller, expeller ring, seal ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), end cover set screw (1 set consists of 8 nos), shim set, piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner, frame plate stud & nut, frame plate liner, cover plate bolt& nut, model: 3/2 cah, metal/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve, frame plate liner insert stud (1 set consists of 4 nos), seal ring, volute frame seal, impeller, discharge joint ring, volute liner, cover plate, intake joint ring, adjusting screw, nut & washer, frame plate stud & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), frame plate liner insert, frame plate, impeller o ring, grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, expeller, expeller ring, shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), cover plate liner stud (1 set consists of 4 nos), cover plate liner (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), frame plate liner, model: 4/3 dah, rubber/ expeller seal, bearing assembly, clamp bolt & nut (1 set consists of 4 nos), shaft sleeve o ring (1 set consists of 2 nos), shaft sleeve, frame plate liner stud (1 set consists of 4 nos), frame plate liner, frame plate, impeller (normal), cover plate liner, cover plate, cover plate liner stud (1 set consists of 4 nos), adjusting screw, nut & washer (1 set consists of 4 nos), frame plate stud & nut (1 set consists of 4 nos), impeller o ring, cover plate bolt& nut (1 set consists of 4 nos), shaft, labyrinth locknut, labyrinth (1 set consists of 2 nos), grease retainer (1 set consists of 2 nos), bearing housing, end cover (1 set consists of 2 nos), shim set, end cover set screw (1 set consists of 8 nos), piston ring (1 set consists of 4 nos), bearing seal (1 set consists of 2 nos), grease cup, grease cup adaptor, gland ( 2 piece), gland packing (1 set consists of 2 nos), neck ring, gland bolt, nut & washer (1 set consists of 2 nos), lantern ring, gland clamp bolt (1 set consists of 2 nos), frame plate liner insert, seal ring, impeller (trimmed), volute liner, volute frame seal, frame plate liner insert stud (1 set consists of 4 nos), discharge joint ring, keeper plate, intake joint ring, expeller, expeller ring, model: 6/4 eah, metal/ gland seal, bearing assembly, clamp washer, clamp bolt-1 nut, shaft sleeve o ring, shaft sleeve, frame plate liner insert stud -1 thin self lock nut, seal ring, volute liner seal, impeller, frame plate, discharge joint ring, volute liner, throat bush, cover plate, cotter, intake joint ring, adjusting screw -3 thin nuts -2 washers, base, frame plate liner insert, impeller o ring, cover plate bolt -2 nuts, packing, gland ( 2 piece), gland bol

Central Government And Public Sector

CTN :41053969

23 Jul, 2025 NA

Guwahati - Assam

Tender For supply of pin assembly adjuster to brake head lever consisting of the following items: 1)pin- drilled he x head 3/4-10x4-3/6 (2)washer- flat 3/4 (3) washer- lock 3/4 (4) nut- slotted hex 3/4-10, (5) pin cotter- 5/ 32 x 1-3/4 as per emd part no 8333166. [ warranty period: 30 months after the date of delivery ]

Backrest Lock Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector