Latest barrier gate Tenders | Government barrier gate Tenders

Central Government/Public Sector

CTN :45422700

09 Jul, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply and installation of interior furnishing of one rake set of namo bharat rapid rail (16 car formation) including nose cone and driver cab interior panelling and fitting as per specification icf/md/spec-418, issue status-01, rev-01.amd.01 & 2 and rcf annexure rcf_namo bharat rapid rail. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025, as per drawing: icf/md/spec-418 rev. 01 with amendment 1 & 2 and rcf annexure rcf_ namo bharat rapid rail. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743714

09 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply and installation of interior furnishing of one rake set of namo bharat rapid rail (16 car formation) including nose cone and driver cab interior panelling and fitting as per specification icf/md/spec-418, issue status-01, rev-01.amd.01 & 2 and rcf annexure rcf_namo bharat rapid rail. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025, as per drawing: icf/md/spec-418 rev. 01 with amendment 1 & 2 and rcf annexure rcf_ namo bharat rapid rail. [ warranty period: 30 months after the date of delivery ] ]

CTN :45700286

15 Jul, 2026 NA

Ernakulam - Kerala

Tender For procurment of diving items - o-ring 10-pack, screw 10-pack, o-ring, 6.07x1.78, pu, nm&oc, 10x336900182, o-ring tool kit, nm, spring, anti rust tube, cylinder ring assy., pressure gauge assembly for regulator unit, protective cap, suit hose, low volume visor for diving mask/face mask for aga divator, face mask for diving mask for ag divator, guide disc, diaphragm holder, guide pin, locking spring, lever, sealing sleeve, connection nipple, centre spindle, lever spring, cover, mask body, relief valve spring, stop ring, washer, spring, hand wheel cover, nipple, webbing buckle, buckle,fixed part, piston, orifice, spring, safety disc, safety plug 300 bar, handle section, spacing washer, level support, guide buishing, valve cone, quick coupling connection, plug, cover, hose gasket, gasket, washer, valve housing diving, diviator mkii lebel, holder, nut, locking ring, retaining ring, spacer, locking ring, cylinder ring, o ring, o-ring 12,42x1,78, 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 10-pack, o-ring 3, 1 x 1, 6, 10-pack, o-ring 5-pack, screw 10-pack, screw 10-pack, screw 10-pack, nut 10-pack, screw 10-pack, screw 10-pack, washer, nut 10-pack, sealing plate 25-pack, protective cap 3-pack, pin 10-pack, pin 10-pack, gland seal 10-pack, non-return valve disc 10-pack, high pressure hose, positive pressure attachment, sealing piston assy., washer 10-pack, o ring, shoulder strap assy,right, shoulder strap assy,left, valve stem assembly, spacer 10-pack, o ring, low volume visor, strap lovk, screw, diaphram, head harness, connection nipple, lifting spindle, piston, piston 5-pack, antifreezing cap 5-pack, high pressure hose short, discharge plug (din) controlled, locking strap, 1 pcs, pad, mk4 regulator assy, breathing bag, mouthpiece assembly, relief valve, high pressure hose assembly, bracket, strap, screw, buckle, male 40mm, locking clip, fomlube, neck strap, dosage regulator, warning indicator, bellow arm, safety pressure unit, valve holder, locking ring, o-ring 18, 77 x 1, 78, bellows assembly, dosage manometer assembly, o-ring 52, 0 x 3, 0, bellows weight, assembly, pressure gauge assy, canister lid gasket, screw assembly, lower, buckle holder with buckles, long, elastic string, 1700mm, sealing tape, screw, 1 pcs, screw, 1 pcs

CTN :45261219

09 Jul, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of tas revamp at kadapa terminal c c - supply of 3inch mfm with 4inch flange , erection, tandc of 3inch mfm , supply of 2inch mfm inc 2inch nrv , erection, tandc of 2inch mfm , camc of supplied mass flow meters , supply - 4inch sae with dpg , erect and comm of 4inch sae , sup-rtd cm temp transmitter , testing and commng of rtd , sply 4inch dcv , erect and comm of 4inch dcv , sply 2inch piston type dcv , erect and comm of 2inch dcv , sup - 2inch sae with dpg , erectand comm - 2inch sae , sup dual arm bcu , erect and comm of bcu , sup of rit , erect and comm of rit , sup-additive block-powrandtrbo , erect and comm of additive block , sup of proximity card reader , supply of proximity cards , supply and inst of face readers for biometric , barrier gate , erection and commissioning of barrier gate , terminal server - 16 port , erect and comm - terminal server , cabling works for shifting of metering assembly , mandatory spares-gantry equipm , armoured cat6a cables with shielded rj45 connectors , sup - 24cx1.5 sq. mm - frls , sup - 8 cx1.5 sq. mm - frls , sup - 4 cx1.5 sq. mm - frls , sup - 3cx2.5 sq. mm - frls , sup- 1px1.5 sq. mm - frls , sup- 2px1.5 sq. mm - frls , sup- 12 px1.5 sq. mm - frls , lay -all type of cables , load rack server , client pcs , terminal automation software , manday assistance , resident engineer during stabilisation , camc of supplied tas equipment , camc of free issue items , camc period load rack server , camc period client pcs , 24 port ethernet switch , process plc

CTN :45715024

15 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For supply of lab equipment items etc( non authorized) - filter paper 18.5 cm (kalpi), lead sub acetate (merck), pen type t.d.s meter (hanna/amaze), pen type ph meter (0.0 to 14.0 ph) (hanna/amaze), digital ph meter sensor (0-10 ph) (hanna/amaze), digital conductivity meter - (hanna/amaze), brix spindle range - (0-10) at 27 °c (standard quality), brix spindle range - (10-20) at 27 °c (standard quality), brix spindle range - (20-30) at 27 °c (standard quality), digital ph meter make - (hanna/amaze), towels small cotton (1.0x1.5 fit) (standard quality), wipar for lab cleaning (standard quality), surf (dit. power ) (standard quality), soap (dettol), universal ph indicator soltions (ph 1.0 - 11.0) make-merck/qualigens, beaume hydrometer brass (0-10), rectified sprit alchohol (merck/qualigens), bucket for juice sample 03 liter (standard quality), enamol mug for sample 1/2 liter (standard quality), hand gloves big size (rubber) ( standard quality ), plastic bucket (10 liter) (standard quality), phenyle floor cleaner (5 ltr), ear plug (standard quality) , what man filter paper (460x570mm) (b.t.b ph paper), cell for pentype ph/t.d.s. meter (standard quality), knife for rapipol extractor (sug fab ceporation) (s.f.c. equipment), tissu paper (standard quality) , absolute alcohol or ethanol 99.9% pure (01 liter bottle) make-merck/qualigens, tarpoline size 20x30 mtr x 30 mtr good quality isi mark 200 gsm, marker pen make- rynolds/cello/camlin, needle for sugar bags sttiching size - gb 230 (standard quality), needle for sugar bags sttiching size - l (standard quality), hand sttiching machine size - 25 no (standard quality), weight machine electronic 100kg (standard quality), hand carts (standard quality), solid fibre wheel for hand cart (200mm ) (standard quality), three play jute twin (standard quality), stiching thread for sticting pp/jute bags 2000 mtr per cone (breaking strength 8 kg) (make- moons/coats/surlon), rechargeable tourch (standard quality), custord oil , common salt crystal size (sodium choloride) (25 kg each bag) , d.a.p (iffco) , urea (only iso) , allum make- (standard quality), rubber braided hose pipe 1 inch heavy duty working pressure 8kg/cm2 make- mansson, plastic mug for sample 01 liter (standard quality), uranium acetate (standard quality) , black polythene (standard quality), alpha nepthol c10h70h make -(aquasol/merck/hanna), jeans cloth for grader & hoppar make- (standerd quality) , dislove oxygen test regent- d.o regent - d.01 make -(aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.02 make -(aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.03 make - (aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.04 make - (aquasol/merck/hanna) , dislove oxygen test regent- d.o regent - d.05 make - (aquasol/merck/hanna) , safety goggles (standard quality), total hardness test kit make - (aquasol/merck/hanna) , calcium hardness test kit make - (aquasol/merck/hanna) , hydrzine test kit make - (aquasol/merck/hanna) , ortho phophate test kit make - (aquasol/merck/hanna) , silica low renge make - (aquasol/merck/hanna), silica high renge make - (aquasol/merck/hanna) , silica medium range make - (aquasol/merck/hanna) , phophate low label make - (aquasol/merck/hanna) , phosphate high label make - (aquasol/merck/hanna) , alkalinity make - (aquasol/merck/hanna) , chloride make - (aquasol/merck/hanna) , hydrazen test kit make - (aquasol/merck/hanna) , sulphate test kit make - (aquasol/merck/hanna) , g.i. bucket (10 liter) (standard quality) , sulfuric acid (h2so4) n/2.8 normal solution 6amp (standerd quality), sucrose (c12h22o11) (standard quality) , ph - buffer capsule (rang ph 04) (standard quality) , carbon disulfide (cs2) (standard quality) , juice strainer (big size) (standard quality) , barium chloride (bacl2) (standard quality) , starch indicator (standard quality) , glacial acetic acid (standard quality) , potassium dichromat (standard quality) , diagram plant breeder kit 100ml (pla

State Government

CTN :45684098

24 Jul, 2026 4.72 Crore

Belgaum - Karnataka

Tender For tender for establishment of centre of excellence in electrical vehicle at vtu regional centres of muddenahalli, mysuru, kalaburgi and talakal - servo motor rotating arm, propeller fin, battery connector, jumper pin header, battery holder, cable usb, button cap large passive elements, button small passive elements, button large passive elements, potentiometer(10ko) passive elements, switch passive elements, capacitor(10uf) passive elements, capacitor(104) passive elements, resistor(10ko) passive elements, resistor(1ko) passive elements, resistor(220o) passive elements, big blue led active elements, big yellow led active elements, big green led active elements, big red led active elements, rgb led active elements, diode active elements 1n4001, diode active elements 1n4148, pnp transistor 8550 active elements, npn transistor(8050) active elements, relay active elements, active buzzer active elements, motor drivers, seven segment display, lcd display, dc motor, servo motor, m to m jumper wires, f to f jumper wires, m to f jumper wires, tilt sensor, ultrasonic sensor holder, light sensor, ultrasonic proximity sensors, analog temparature sensors, breadboards, uno board, tx/rx module, usb cable for stm32 board, stm32 discovery board, basic can bus protocol training system, elecetrical vehicle charging technology bench, multi mcu trainer kit (with banana plug-ins), power electronics pre-build kit, permanent magnet synchronous motor with regen, differential gear training model (ev auto), ev wiring and harness system mock layout (2-wheeler), four wheeler simulator pmsm / bldc motor kit, battery management system (bms) training module, belt pulley, female type 6 charging socket, front wheel axle, front wheel rim ( 12 inch), tubeless tyres, main stand, side stand, mid - drive chassis, switches ignition, horn, indicator, head light, cone-set, handle bar, t-stamp, fork, smart charger can, dc-dc converter, swing arm, vcu, brake sensors, display, wiring harness, throttle (re twistable), mid drive motor 3kw and pull belt, mcu 120a, battery 4kw nmc, cordless drill machine tools, tool kit trolley tools, pipe wrench tools, screwdriver 803 tools, taparia screw driver 863 200 tools, taparia philips s/d psc862250 tools, taparia screw driver 861 100 tools, installation tape tools, soldering gun tools, multimeter tools, hammer - 40mm nylon tools, hammer - 500g tools, chissel tools, socket set box 24pc tools, long circlip plier outer tools, long circlip plier inner tools, t spanner 14mm tools, t spanner 12mm tools, t spanner 10mm tools, t spanner 8mm tools, t spanner 7mm tools, connector - 902 tools, tester tools, nose plier tools, monkey plier tools, wise grip plier tools, cutting plier tools, wire cutter tools, screw driver 2 in 1 - 903ibt tools, ring spanner set tools, double end spanner set tools, t allen key 3,4,5,6 mm tools, l allen key set tools, regulated power supply, motor hall phase tester, continuity tester, helmet, clamp meter, taco meter, hall sensor, shaft drive motor, bldc motor (cut section), pmsm motor (cut section), four wheelar car, shaft drive 2w full vehicle naked, mid drive 2w full vehicle 1, hub drive 2w full vehicle 1, hub drive 2w full vehicle naked 1, mid drive 2w full vehicle, mid drive 2w full vehicle naked, hub drive 2w full vehicle, hub drive 2w full vehicle naked, lfp cells 3.2 v 100 ah, hot air blower, screw gauge, black 12 awg wire, red 12 awg wire, hly cells, chogori 4+2 female connector, chogori 4+2 male connector, crimper, iec female connector, iec male connector, anderson sb50, safety gloves, safety glasses, duct tape 55mm, filament tape 55mm, kapton tape 55mm, lead, cell holder 2x2 - 32650, cell holder 2x2 - 21700, cell holder 2x2 - 18650, nickel strip - 32650, nickel strip - 21700, nickel strip - 18650, lfp cells 3.2 v 6 ah - 32650, nmc cells 3.7 v 4 ah - 21700, nmc cells 3.7 v 2.5 ah - 18650, spot welding machine 1kva (pneumatic), active balancer 24s 10 amps, ir tester

State Government

CTN :45695199

10 Jul, 2026 4.99 Crore

Belgaum - Karnataka

Tender For tender for establishment of centre of excellence in electrical vehicle power train technologies at vtu regional centre, bengaluru - servo motor rotating arm e, propeller fin e, battery connector e, jumper pin header e, battery holder e, usb cable e, button cap (large)passive elements, button(small) passive elements, button(large)passive elements, potentiometer(10ko)passive elements, switchpassive elements, capacitor(10uf)passive elements, capacitor(104)passive elements, resistor(10ko)passive elements, resistor(1ko)passive elements, resistor(220o)passive elements, big blue led active elements e, big yellow led active elements e, big green led active elements e, big red led active elements e, rgb led active elements e, active elements 1n4001 diode, active elements 1n4148 diode, pnp transistor(8550) active elements, npn transistor(8050) active elements e, relay active elements e, active buzzer active elements ev, motor driver e, seven segment display e, lcd display e, dc motor e, servo motor e, jumper wires e, tx/rx module e, tilt sensor e, ultrasonic sensor holder e, light sensor e, ultrasonic proximity sensors e, analog temparature sensors e, breadboards e, uno board e, usb cable for stm32 board e, ecu board, stm32 discovery board e, battery cell making machine, integrated electronics workstation, pcb design equipment, dynamometer 2w, electrical vehicle motors and drives workbench, battery management system (bms) training module e, model-based development (mbd) real-time controller, power electronics training bench, off board charger control board, pe-pp control panels, pdi unit, dc converters, drive axles, wheel axles, foot throttle e, auxiliary battery, relay e, harness, wheels e, differential e, moter ev, bms e, vcu e, mcu e, on board charger, battery pack e, naked chassis, belt pulley e, female type 6 charging socket e, front wheel axle ev, front wheel rim ( 12 inch) e, tubeless tyres e, main stand ev, side stand ev, mid - drive chassis e, switches ignition, horn, indicator, head light ev, cone-set ev, handle bar ev, t-stamp ev, fork ev, smart charger can ev, dc dc converter ev, swing arm ev, vcu ev, brake sensors ev, display ev, wiring harness ev, throttle (re twistable) ev, mid drive motor 3kw and pull belt e, mcu 120a e, battery 4kw nmc ev, cordless drill machine tools ev, tool kit trolley tools e, pipe wrench tools e, screwdriver 803 tools e, taparia screw driver 863 200 tools ev, taparia philips s/d psc862250 tools ev, taparia screw driver 861 100 tools e, installation tape tools ev, soldering gun tools e, multimeter tools e, hammer - 40mm nylon tools ev, hammer - 500g tools ev, chissel tools ev, tools 24pc socket set box, long circlip plier outer tools ev, long circlip plier inner tools ev, t spanner 14mm tools ev, t spanner 12mm tools ev, t spanner 10mm tools e, t spanner 8mm tools ev, t spanner 7mm tools ev, connector - 902 tools ev, tester tools ev, nose plier tools ev, monkey plier tools e, wise grip plier tools e, cutting plier tools e, wire cutter tools e, screw driver 2 in 1 - 903ibt tools ev, ring spanner set tools ev, double end spanner set tools ev, t allen key 3,4,5,6 mm tools ev, l allen key set tools ev, motor hall phase tester ev, continuity tester ev, safety helmet, programmable mcu, clamp meter ev, taco meter ev, mid drive mcu, hub motor mcu, hall sensor ev, mid drive stator, hub drive stator, induction stator, bldc stator, mid drive rotor, hub drive rotor, induction rotor, bldc rotor, induction motor, brush motor, shaft drive motor ev, bldc motor, pmsm motor, ev 4w - car, ev 3w - auto ev, ev2w - shaft drive - full vehicle, ev 2w - hub drive full vehicle ev, ev 2w - mid drive - full vehicle ev, ev 2w - hub drive - full vehicle ev, ev 2w - mid drive - full vehicle, ev 2w - hub drive - full vehicle, eight channel 3 amps cdc cell grading machine, cells bolt, cell 3.2 v 100ah lfp, hot air blower ev, green 100mm insulation, clamp meter 0-600 amps, battery tester, bus bars, screw gauge ev, silicon black, bla

corporations/Associations/Others

CTN :45536909

29 Jun, 2026 NA

Anpara - Uttar Pradesh

Tender For corrigendum : providing of operation and maintenance power house / power plant - work of coal stone filling and slope protection for prevention of soil erosion around ash disposal pipeline pedestal supports including structural strengthening near barrier gate at 2*500 mw dtps ..

Central Government/Public Sector

CTN :45657803

03 Jul, 2026 NA

Ernakulam - Kerala

Tender For supply of traffic safety cone , bull nose barrier , warning bollard , water filled road barrier , traffic safety led batten light , solar flash light for traffic cone , cable ramp 2_channel , hose ramp for fire hose , 3 piece portable elevator barrier

CTN :45626111

29 Jun, 2026 NA

Ranchi - Jharkhand

Tender For supply of timing belt l- 300, suitable for heidz india make electrically operated lifting barrier gates installed in ranchi division as per specn. no. spn/208/2012 ver. 2.0, amendment 1 or latest. [ warranty period: 30 months after the date of delivery ] ]

Barrier Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector