Latest barrier gate Tenders | Government barrier gate Tenders

CTN :45741650

21 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of one set of multi cellular barrier of size 1.22m x 0.61m x 1.50m comprising two laterally connected cells, each of size 0.61m x 0.61m x 1.50m as per store list att under job no 0045 , geotextile liner as per store list , accessories with one protective wall basket as per store list , hand gloves as per store list , heavy duty staplers with 04 nos packet of pin as per store list , user handbook as per store list

CTN :45261219

09 Jul, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of tas revamp at kadapa terminal c c - supply of 3inch mfm with 4inch flange , erection, tandc of 3inch mfm , supply of 2inch mfm inc 2inch nrv , erection, tandc of 2inch mfm , camc of supplied mass flow meters , supply - 4inch sae with dpg , erect and comm of 4inch sae , sup-rtd cm temp transmitter , testing and commng of rtd , sply 4inch dcv , erect and comm of 4inch dcv , sply 2inch piston type dcv , erect and comm of 2inch dcv , sup - 2inch sae with dpg , erectand comm - 2inch sae , sup dual arm bcu , erect and comm of bcu , sup of rit , erect and comm of rit , sup-additive block-powrandtrbo , erect and comm of additive block , sup of proximity card reader , supply of proximity cards , supply and inst of face readers for biometric , barrier gate , erection and commissioning of barrier gate , terminal server - 16 port , erect and comm - terminal server , cabling works for shifting of metering assembly , mandatory spares-gantry equipm , armoured cat6a cables with shielded rj45 connectors , sup - 24cx1.5 sq. mm - frls , sup - 8 cx1.5 sq. mm - frls , sup - 4 cx1.5 sq. mm - frls , sup - 3cx2.5 sq. mm - frls , sup- 1px1.5 sq. mm - frls , sup- 2px1.5 sq. mm - frls , sup- 12 px1.5 sq. mm - frls , lay -all type of cables , load rack server , client pcs , terminal automation software , manday assistance , resident engineer during stabilisation , camc of supplied tas equipment , camc of free issue items , camc period load rack server , camc period client pcs , 24 port ethernet switch , process plc

CTN :45687291

01 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For e- bid for the rate contract of suture material (2026-28) group a3 miscellaneous - cardiac pacing wires electrode blue 60 cm pacing wire, 17 20 mm, circle taper point & 60 mm straight cutting needle with breakaway point, length: 60 cm ( 10 cm), cardiac pacing wires electrode blue 60 cm pacing wire, 26 mm, circle taper point & 90 mm straight cutting needle with breakaway point, length: 60 cm ( 10 cm), steel wire circle cutting ccs 48 mm stainless steel monofilament, size: 5, length: 55 cm ( 10 cm), steel wire circle cutting ccs 48 mm stainless steel monofilament, size: 6, length: 55 cm ( 10 cm), topical skin adhesive skin closure (2-octyl cyanoacrylate) with self-adhesive polyester mesh, size: 22 cm, pack of 2/box, usfda & ce approved, topical skin adhesive skin closure (2-octyl cyanoacrylate) with self-adhesive polyester mesh, size: 60 cm, pack of 2/box, usfda & ce approved, umbilical tape 3 mm 75 cm umbilical cotton tape, length: 75 cm ( 10 cm), biopatch protective disc with chg, antimicrobial dressing, size: 1-inch disk (2.5 cm) with 4.0 mm centre hole, biopatch protective disc with chg, antimicrobial dressing, size: -inch disk (1.9 cm) with 1.5 mm centre hole, biopatch protective disc with chg, antimicrobial dressing, size: 1-inch disk (2.5 cm) with 7.0 mm centre hole, interceed adhesion barrier oxidised regenerated cellulose adhesion barrier, size: 3 4 inch

corporations/Associations/Others

CTN :45536909

29 Jun, 2026 NA

Anpara - Uttar Pradesh

Tender For corrigendum : providing of operation and maintenance power house / power plant - work of coal stone filling and slope protection for prevention of soil erosion around ash disposal pipeline pedestal supports including structural strengthening near barrier gate at 2*500 mw dtps ..

Central Government/Public Sector

CTN :45652396

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for non ac bangladesh coach. note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25parnabang version 3, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securingthe components: - use steel straps or ropes to fimly anchor the components within thewooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorbshocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify thatall components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638111

20 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of partition frame for lsdd amrit bharat 3.0 ( (note- colour scheme is as per design letter no md48161 dated- 15/05/2026 ), as per drawing: mp26pfgsab3.0 version 0, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed.8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period:30 months after the date of delivery ] ]

CTN :45626111

29 Jun, 2026 NA

Ranchi - Jharkhand

Tender For supply of timing belt l- 300, suitable for heidz india make electrically operated lifting barrier gates installed in ranchi division as per specn. no. spn/208/2012 ver. 2.0, amendment 1 or latest. [ warranty period: 30 months after the date of delivery ] ]

CTN :45601303

29 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of hid reader with controller , visitor management system , tripod turnstile , boom barrier 6m , workstation , protective shed , anpr cameras , led tv 55 inch , poe switch , 08 ch nvr , installation and commissioning