Latest base frame Tenders | Government base frame Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45286417

12 Jun, 2026 NA

Shajapur - Madhya Pradesh

Tender For tender for purchase of furniture items - lcd projector full hd 1920*1080 with 5000 lumens brightness, adjustable projector stand ceiling mounted, projector screen (6*4 feet), pa mixer amplifier, chairman unit table microphone, delegate unit table microphone, column speaker 10w/100v, speaker cable bundle

State Government

CTN :45286420

12 Jun, 2026 NA

Shajapur - Madhya Pradesh

Tender For tender for purchase of machine items - lcd projector full hd 1920*1080 with 5000 lumens brightness, adjustable projector stand ceiling mounted, projector screen (6*4 feet), pa mixer amplifier, chairman unit table microphone, delegate unit table microphone, column speaker 10w/100v, speaker cable bundle

State Government

CTN :45126037

28 May, 2026 NA

Valsad - Gujarat

Tender For corrigendum : providing of annual maintenance service - audio conferencing system - av distribution amplifier; ahuja; oem authorised service provider,annual maintenance service - audio conferencing system - cabling and accessories; ahuja; oem authorised service provider,annual maintenance service - audio conferencing system - handheld microphone with desk stand; ahuja; oem authorised service provider,annual maintenance service - audio conferencing system - dual channel power amplifier- 1000 watt/channel; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - gooseneck microphone with pluggable lectern stand; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - audio mixer; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - controller equipment; bosch; oem authorised service provider,annual maintenance service - audio conferencing system - main loud speaker assemble - 2 way; jbl; oem authorised service

Central Government/Public Sector

CTN :45297004

29 May, 2026 NA

Bokaro - Jharkhand

Tender For pump w/out motor&base frame(1items) comprising of following: 1 - pump w/out motor&base frame ,

Central Government/Public Sector

CTN :45218789

25 May, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : procurement of spares for fly ash cement feeding system of vhp 5000 ash brick plant at ntpc sipat - cement screw,168x9225mm,neptune,vhp5000, gear box,neptune,cement silo,vhp 5000, fly ash scrw,219 x l 8825mm,neptune, gear box,neptune,vhp 5000, end brg hsg,ebs/1/a/c1,neptune, hanger brg,hb/f/4036/b/219/09,neptune, hanger brg,hb/c/4036/b/168/09,neptune, flap vlv assy,s-5846-02+00&3,neptune, screw housing,s-5846-02+00&5,neptune, scrw&screwdriver sft,6,8,neptune, mixing chamber,11,neptune, cone,s-5846-02+00&13,neptune, press rlf saf vlv,33,neptune, suction fltr element,56,neptune, nrv,62,neptune,cfs,s1019, press relief vlv saf,65,neptune,aec-19, nrv,70,neptune,aec-19, punch cleaning brush,neptune,vhp5000, blower assy,51,neptune, vibro mtr base pad,s586601+&39,neptune, av pad base frame,neptune,vhp 5000

Central Government/Public Sector

CTN :45275218

25 May, 2026 NA

Barh - Bihar

Tender For procurement of scaffolding materials for stage-1 boiler for ntpc barh - right angle coupler,e2176-37,qes, swivel coupler,e2176-36,instant upright, trap door platform,e2176-08,qes, horizontal brace,1508-k,instant upright, spandeck,e1171-1829,instant upright,qes, hd spandeck,e1171-3772,iu, hd spandeck,e1172-5054,instant upright, ehd snapout,e150-40x,instant upright,qes, canti t plate,e159-77,iu, adjustable leg,e210-01,instant upright, coupler brace,e2100-215,instant upright, diagonal brace,e2176-04,instant upright, post level,e210086r,instant upright,qes, platform,sipat:e2176-06,instant upright, nrw platform,e2161-06h,iu, narrow platform,e2161-06n,iu, coupler spigot,e216110b,instant upright, support frame,e2200-35,instant upright, dia brace,e2201-3367-t,iu, dia brace,e2201-3667-i,iu, pl dia brace,e2201-4192,iu, plan diagonal brace,e22015375a,qes, spandeck,e2207-1829e,instant upright,qes, hd spandeck,e2208-5054k,iu, spandeck post,e221009,instant upright, guard rail,e2213-3772a,iu, guardrail frame,e2213-5054a,qes, beam bracket,e2217-101,iu, outboardbracket,e2217-201,iu, cantilever bracket,e2217-21,iu, cantilever bracket,e2217-34,iu, load spreader,e2760-3130,iu, load spreader,e2760-3450,iu, up rein clmn,e2850-04,iu, lwr rein clmn,e2850-05,iu, renfrc clmn,e2850-06,iu, beam,e2852-313oa,iu, base truss,e2931-01,iu, wing truss,e2931-02,iu, floor beam,e2931-03,iu, truss,e2931-04,iu, support beam,e2931-05,iu, support beam,e2931-06,iu, support beam,e2931-07,iu, guard rail post,e2931-18,iu, beam,e2931-19,iu, support beam,e2931-21,iu, base frame,e2931-36,iu, coupler brace,e582-38-o,iu, pedal bracket,e811-100,instant upright

State Government

CTN :45275288

28 May, 2026 NA

Delhi - Delhi

Tender For maintenance of sewer system in ac-03 (phase-08) - hiring charges of 30 hp sewage pump/submersible pump set in ac-03 in manhole line along with pump for sewage application with electric motor. base frame, motor starter delivery/suction line(dia= 100 mm and length 250 meter). nrv, bends, flanges. laying of wiring from electric meter to pump-set approx. 350 meter with wire as per site requirement etc at timarpur oxidation pond. hiring of labour at site for operation, watch and ward of sewage pump set/ submersible set.

CTN :45302928

13 Jun, 2026 5.00 Lacs

Anjaw - Arunachal Pradesh

Tender For supply of maintenance of volleyball ground , flex banners with frame 6 inch x 3inch , flex banners without frame , jersey , shorts , shoes , socks , marker cones , whistle , volleyball official size , volleyball net , first aid kit , ice pack or box , referee stand , referee kit , loudspeaker rental , 250 w amplifier rental , microphone rental , media incl photography and videography , refreshments , champion team prizes and momento , runner up team prizes and momento , best player 1 , best player 2

CTN :45275810

28 May, 2026 11.56 Lacs

Panchkula - Haryana

Tender For procurement of furniture for workstation of prefab staff room in pmda office sector 3, panchkula - providing, supplying and placing of workstation chair with cantilever flex system, three position back tilt limiter. seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass-filled poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in-situ moulded with polyurethane foam and upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/w/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines and spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the `s` shaped spines moulded in high strength glass-filled poly-amide and the spine connector moulded in glass-filled poly-amide form the back-spine structure involved in multi-dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled poly-amide: the height adjustment feature should be button operated having adjustment of 6.6 0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass-filled poly-amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 0.3 cm . pedestal assembly: the pedestal should be injection moulded in glass-filled poly-amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0 0.5 cm. pitch centre diameter and 76.0 1.0 cm. with castors . twin wheel castors :5 nos. twin wheel castos are injection moulded in poly-amide having 5.0 0.1 cm wheel diamter assembled to the pedestal. overall dimensions of chair seat height - min 44.5 to max 53.8 cm. height - min 99.5 to max 108.8 cm. width and depth of chair as measured from pedestal - width-76.0 cm and depth-76.0 cm. the product should be greenguard, griha and iaq certified, providing, supplying and placing of workstation chair with cantilever flex system, three position back tilt limiter. seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass-filled poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in-situ moulded with polyurethane foam and upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/w/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines and spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the `s` shaped spines moulded in high strength glass-filled poly-amide and the spine

Base Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors