Get complete information related to latest Bengal Gram Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bengal Gram Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bengal Gram Tenders.
Tender For supply of heavy duty x-axis ground ball screw assembly for back gauge of 800 ton press technical specification accuracy: c1 grade, track: rht, type of nut: sfne, min. dynamic load: 15800kn, min. static load: 3000kn, bcd: 26.3, allowable revolutions: 2300mm^-1mm, dia: 25x10p (p=pitch), total length: 1583mm, thread length: 1489mm, raw material: screw: en19-hardened screw grade, ball nut: en353. make- clampwell/ hiwin/ thk or rexroth only. note- drawing is also attached for reference. [ warranty period: 12 months after the date of delivery ] ]
Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit
Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con
Tender For supply and installation of open gym equipment at shri ram international school nandana, patarsa ghatampur kanpur nagar - chest press cum seat puller, chest press (double )product area 1675 mmx782 mmx2160 mm.safe play area-3100mmx1850mm.center pipe-114 mmod gi b vlass pipe.seat frame 42 mm od gi b class pipe.leg frame 42 mm od gi b class pipe., leg press double:cable diameter 1910x500x1550 mm.length 98 "xwidth 54 3/4"xheight 56".extra wide footplate., push up bar, arm shoulder excer cise two peqple :out put(shoulder wheel ): full climbing work out for whole body.dimension above ground: 1220 x 760 x 500 mm main frame: 1140d heavy duty pipe.arm handle/leg frame 25/320d ms pipe. cap: nylon injection moulded.nut bolts: zinc coated bolts. we do pure polyester power coated (50-60microns) for attractive looks which is meant for utdoor usage, space walker: space walker is the best alternative to elliptical training equipment., seated puller:main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, sit up bench :main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, taich 2 in 1, triple twister, bicycle-bicycle :is the most common exercise equipment since from last many yearsincluding full lower part of bodyfrom feet calf knees,waist and half abdominal., air walker, foundation and erection ,installation of all gym equipment, s/fixing of granite stone
Tender For supply and installation of open gym equipment at shri ram multispeciality hospital, nursing paramedical college nh 34 ghatampur block ghatampur - chest press cum seat puller, chest press (double )product area 1675 mmx782 mmx2160 mm.safe play area-3100mmx1850mm.center pipe-114 mmod gi b vlass pipe.seat frame 42 mm od gi b class pipe.leg frame 42 mm od gi b class pipe., leg press double:cable diameter 1910x500x1550 mm.length 98 "xwidth 54 3/4"xheight 56".extra wide footplate., push up bar, arm shoulder excer cise two peqple :out put(shoulder wheel ): full climbing work out for whole body.dimension above ground: 1220 x 760 x 500 mm main frame: 1140d heavy duty pipe.arm handle/leg frame 25/320d ms pipe. cap: nylon injection moulded.nut bolts: zinc coated bolts. we do pure polyester power coated (50-60microns) for attractive looks which is meant for utdoor usage, space walker: space walker is the best alternative to elliptical training equipment., seated puller:main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, sit up bench :main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, taich 2 in 1, triple twister, bicycle-bicycle :is the most common exercise equipment since from last many yearsincluding full lower part of bodyfrom feet calf knees,waist and half abdominal., air walker, foundation and erection ,installation of all gym equipment, s/fixing of granite stone
Tender For supply of rice, wheat, musur dal and bengalgram to the mr distributors of jhargram district for distribution among the identified severely acute malnourished children.