Latest blanking plate Tenders | Government blanking plate Tenders

CTN :41287395

08 Aug, 2025 6.06 Lacs

Chandigarh - Chandigarh

Tender For replacement of electrical accessories, ceiling fan and tube lights in inspection bungalow building, sector 19 chandigarh. - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required., group c, dsr item no. 1.15 rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group c, dsr item no. 1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 a switch, 3 pin 5/6 a socket outlet, dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.27 supplying and fixing following size/ modules, gi box along with modular base & cover plate for modular switches in recess etc. as required., 1 or 2 module (75 mmx75 mm), 3 module (100 mmx75 mm), 4 module (125 mmx75 mm), 6 module (200 mmx75 mm), 8 module (125 mmx125 mm), 12 module (200 mmx150 mm), dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required., dsr item no.1.57 supplying & fixing suitable size gi box with modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, "c" curve including connections, painting etc. as required., dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 8 way (4 + 24), double door, s/i/t/c of 1x18/20watt. led box type fittings made of crca sheet with 1 nos. led tube rods. the fittings should be installed on existing surface. the led tube rod should be of philips/ wipro/ havells/ bajaj/ crompton/ trilux/ panasonic/ lt/ jaquar/ surya make of polycarbonate material only. (as per complete item no. 14 of the dnit)., s/i/t/c o

CTN :41296405

11 Aug, 2025 NA

Ranchi - Jharkhand

Tender For supply of oil sampling kit consisting of socket-36, socket-50, foot pump with pipe, prd blanking plate , pressure gauge, sampling arrangement with valve for oil sampling of jsti make traction transformer of v ande bharat train set. [ warranty period: 30 months after the date of delivery ]

CTN :41242710

13 Aug, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of gasket blanking plate , gasket , ring retaining , rubber o , seat , pin , gasket lock pully , retainer gaasket , gasket aerator , plug magnetic , pin master , gasket connetion , plug , o ring , washer , clamp hose , nut , connection fuel drain , nut cross read , spring , cock drain , tde plate , pivot pin , pivot pin allooy steel , pivot pin alloy steel , lynch pin , rivot pin alloy steel , side cutter rh , side cutter lh , rivot pin alloy steel , pivot pin alloy steel , bucket tooth , side cutter lh , side cutter , cold seater kit , capsule , presure hose , seal kit , rak seal , bush , seal , bush spring steel , side light , blade lift cylinder kit , rod inertia brake adjusting

Central Government/Public Sector

CTN :41025245

08 Aug, 2025 NA

Parganas - West Bengal

Tender For corrigendum : tender for supply of 40 types of ghe items - alh9503--alignment fixture , alh9521--rigging tool , 69.02 201p 643h 0000 001--wrench , alh9505--rigging tool , alh9641--extraction tool - oil seal , alh9516a--lifting sling (for shakthi engine) , alhskh0469--special spanner , alh-9524--lifting sling (mrb) , alh9710--dummy feed hose , 69.04 201p 643h 0000 001--wrench -control tube actuator assy , alh9532a--engine stand (shakthi engine) , alh-9558--spanner-tds , alh9620--spacer , alh9691--v-block , alh-sk-h-0616--adaptor , alh9566--stand-tail boom , alh9653--level base-mgb , alh9702--rigging fixture , alh9665--blanking plate (breakaway coupling) , alh9636--tab bending tool , alh9728--removal tool , alh-9569--media , alh-sk-h-0493--rigging tool , alh9732--box spanner , alh9733--lifting sling - ids , alh9755--clino mounting angle , alh9692--rigging tool , alh10911--special socket -actuator assy , alh11706--special spanner , alh11707--special spanner , alh9533--levelling bar , alh9534--levelling bar , alh9535--levelling bar , alhskh905--storage stand - mrb , 201p 620h 1100 002/51/t1--assembly fixture (tracking link) , alh-12513--rigging tool(rigging mr-system) , alh9662--blanking plate , alh9718--screw extraction tool iss-h3 , alh9526--special socket spanner , alh-fcs-130--rigging tool

Central Government/Public Sector

CTN :41194394

14 Aug, 2025 NA

Parganas - West Bengal

Tender For tender for supply of procurement of 33 types of ghe items : - i_p pinion flange brg pressing tool , c_brg bush removal tool-1 , c_brg big bush removal tool , base plate c_brg bush removal tool , blanking plate(fuel tank vent hole) , pusher tool , removal tool , dummy plate (floor board) , dummy plate (floor board) , blanking cap 7_8_-14unjf-3a (male) , blanking cap 7_8_-14unjf- 3a(female) , blanking cap 3_4_-16unjf- 3a(male) , blanking cap 3_4_-16unjf- 3a(female) , teflon dummy for fuel system , open end spsnner (thin) 27 x 32 , blanking plug for refueling valve , fmt neck dummy plate , adaptor for efg , blanking plate-fuel tank , blanking plate for filling aux tank , blanking plate bottom for aux tank , blanking plate for fuel probe , blanking plate top for aux tank , st tank holding lever for ssb instl , ncw dummy al welded , blanking plate for expansion tank , female dustcap for fuel purge hose , female dust cap for fuel obigs hose , dummy inside tank ncw metal , fmt tank side plate , rmt neck dummy cover , locator (for stabilizer bracket) , special socket (alh-12437)

CTN :41195798

04 Aug, 2025 3.00 Lacs

Dimapur - Nagaland

Tender For supply of filter lub oil , joint cylender block to lub oil filter , gaskit cylender head , joint water inlet connection , housing rear end oil seal , seal cranu soft rear end , joint cylender block to oil seal housing , set screw oil seal housing to cyl block , joint cam chamber rear end blanking plate , bolt banjo , washer banjo , joint cyl head rear end cover plate , seat in let 2 exhast stem , fascit ex main fold , joint ex manifold glange , body , joint water outlet connection , thermostat , hose by pass , clip by pass , joint cyl head cover , pipe breather extension , clip by pass , joint induction manifold to cyl head , joint samp lub oil , joint samp to block front , joint samp to block rear , water pump assy , joint water pump to timing case cover , hose water pump , clip water pump , joint fuel pump , pipe fuel oil main leak off assy , waser banjo , plug fuel filter , filter bowl fuel , washer tab fly wheel , set screw fly wheel , dust coverfly wheel , cable step control , joint timing case , cir clip gudge on pin , air filter oil both type , fan , pully , bracket eng mtg , fanbelt , fan extension , pully alternator , pipe assy alternator inlet , pipe assy alternator outlet , lever adj alternator , stud eng mtg bracket , switch starter , cut out regulator , cable stop control , cable idling control , pipe fuel , pipe atomizer over flow , pipe fuel injection , oil fuel injection , oil pressure gauge , water temp gauge , sprink pipe , parking brake liner , praking bracke ribit , head light bulb , head light glass , reflector , cabin celling light assy , clutch bolt , gear box top cover gaskit ) /bid number : gem/2025/b/6488981 * /dated: 23-07-2025 & & / bid document 1 / 49

State Government

CTN :40940352

11 Aug, 2025 9.05 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spare parts of unique industrial handlers make eot cranes installed at 2x660mw, ph-ii, sstpp, mppgcl, dongalia /etni-ii - "pulse encoder: sn:700001240582, ip 66, f255, ub 9-30v dc).1024ppr, class 2, existing make: baumer" , shrouded type dsl for 110/25t eot: 400a copper dsl with expansion joint, support & fastner, hangers & jointing clamp etc. , accessories of dsl , 4 pole hanger clamp , copper joint link , joint cover , current collector , 250a current collector for 110/25t eot. , anti-collision device, model no. acc 102. , dc electromagnetic brake , "dcem brake :code ebdc 300/bm, inrush volt:300v dc, torque :76kgm, rating 100, drum dia 300, dsn volt 220v dc, holding volt: 150 v dc, stroke 3, spg 220ver, sr.no. v-24627/1, existing make: elektromag methods" , "dcem brake: code ebdc 300/bm, inrush volt:300v dc, torque: 76kgm, rating 100, drum dia 300, dsn volt 220v dc, holding volt: 150 v dc, stroke 3, spg 220ver, sr.no. v-24627/2,existing make: elektromag methods" , dyanamic braking resistor. , "dyanamic braking resistor for mh, s.no. sj-342, job no. sj-1348, kw/h.p: 30/ ,volt: 600, amps: 51.3, type: wi30dbr11.4/p6, ohms: 11.4, rating : conti., existing make: speed-o-controls pvt. ltd" , "dbr for ct, s.no. sj-344, job no. sj-1348, kw/h.p: 1.2/ ,volt: 600, amps: 4.5, type: wi1.2dbr60/p6, ohms: 60, rating : conti.,existing make: speed-o-controls pvt. ltd" , "dbr for lt, s.no. sj-346, job no. sj-1348, kw/h.p: 6.4/ ,volt: 600, amps: 19.5, type: wi4dbr16.9/p6, ohms: 16.9, rating : conti.,existing make: speed-o-controls pvt. ltd" , radio remote control , rrc: radio remote control ( shoulder hung, joystic type). range: approx. 355m, frq: 335mhz. (transmeter+ receiver) , rectifier pannel complete unit for dcem brake , "rectifier pannel having sr.no. v-24628/4 is connected with dc brake dia 300 having sr.no. v-24627/4. dc pannel specification: code rpnlc/12, c/s: 50, ac voltage: 415v ac, dc voltage:150v dc, sr.no. v-24628/4, existing make: elektromag methods" , line choke -3phase: inductance 0.157mh, current: 142 amps., imax: 150% , master controler , s.no. sm-1115, type: cm4/sr/6, volts 500 max, amps 40, existing make: speed-o-controls pvt. ltd , s.no. sm-1117, type: cm4/sr/6, volts 500 max, amps 40, existing make: speed-o-controls pvt. ltd , steps:4, volts: 500, amps: 40/10, c/s: 50, existing make: elektromag methods , anti-collision limit switch :anti collosion limit switch, aux supply :110v-230v (for lt), infra red type, range 5-10mtr. existing make electronic switches , requirement of electrical spare parts for unique make eot crane job no.bg-018-01-02 (tdbfp eot) , relay board 8 channel,110v ac, 2c/o contact, 5a. , shrouded type dsl for 60/10t eot: 160a copper dsl with expansion joint, support & fastner, hangers & jointing clamp etc , current collector , 100a current collector for 60/10t eot. , dc electromagnetic brake , dcem 250 dia brake for mh,drum dia 250, 115v. dc, 1.6a , dcem 250 dia brake for ah, drum dia 250, 115v. dc, 1.6a , dyanamic braking resistor. , dbr for mh,s.no. sk-043, job no. sk-072, kw/h.p: 17/ ,volt: 415, amps: 32, type: wi17dbr16.9/p6, ohms: 16.9, rating : conti., existing make: speed-o-controls pvt. ltd , dbr for ah s.no. sk-045, job no. sk-072, kw/h.p: 12/ ,volt: 415, amps: 25, type: wi12dbr20/p6, ohms: 20, rating : conti., existing make: speed-o-controls pvt. ltd , dbr for ct, 130 ohm, 600w , dbr for lt, 40 ohm , 2kw , rectifier pannel complete unit for dcem brake , rectifier pannel having is connected with dc brake dia 250mm dc pannel specification: code rpnlc250, c/s: 50, ac voltage: 415v ac, dc voltage:150v dc, sr.no. 44979/3, existing make: elektromag methods

CTN :40596255

01 Sep, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for rafale aircraft - plug,clamp, protector, protector, clamp,wire, ring,ptfe, seal,pyrometer, closure, plate,blanking, plate,blanking-ecu, plate,blanking, closure, plate,blanking, plug,protective, plug,connector, plug,blanking, plug,connector, bolt, pan head, washer,flat, plug,hexagon head, plug,borescope, plug,blanking, plug,threaded, plug,threaded, plug,blanking, plug,blanking, bolt,czx m3x8-treated, nut,self locking, o-ring, bolt,double hexagon head, plug,protective,dust and moisture s, plug,blanking, plug,blanking

Central Government/Public Sector

CTN :41209229

16 Aug, 2025 NA

Parganas - West Bengal

Tender For tender for supply of pressing tool - oil seal(igb assy) , jacking tool , adaptor , rigging tool , control tube bearing removal tool , tracking link bush pressing tool , spanner (landing gear) , hoisting of alh , aris alignment fixture (ots) , assembly fixture issh2 , radial_axial play checking tool , extractor , seal installing tool - rms-mgb , pressing tool , oil seal insertion tool (igb input) , removal tool(support bush trs) , ids lifting sling , pressure testing tool (rotor mast) , blanking plate (fuel tank) , blanking plate (fuel tank filler ) , fuel feed line blank (male) , fuel feed line blank (female)

Central Government/Public Sector

CTN :41220347

06 Aug, 2025 NA

Bangalore - Karnataka

Tender For tender for supply of oleo restrainer-mlg , oleo restrainer-tlg , rigging tool (collective control installation) , rigging pin (cockpit controls installation) , angle (graduation) plate (cockpit controls installation) lh & rh (2 items) , angle (graduation) plate (cockpit pedal assy gunner) 01 set consists of 3 items.(pointer , lh & rh) , locking pin (to lock the floating link of pedal assy) , rigging tool (for cyclic stick neutral lock for lch-td1 , td2 , td3 & td4 position) , rigging tool (to chech the angular movement of the cyclic stick) , fuel drain tool , special spanner (electrical switches) , special spanner (electrical switches) , spl spanner (for bolt blade fork big) , bearing play checking tool (horz stab lh&rh) , holding fixture-collective co-pilot , wrench (torqueto lock nut sl61n) , wrench (control tube actuator assy) , rigging tool(fh tr lower rig) , adaptor (wrench for tra/mra filter) , spl spanner (main rotor actuator installation) , holding tool (control tube assy) , wrench extension - casing ring , torque tightening fixture(rod assy) , special spanner- wheel brake assy , special spanner- acuator assy unit , spl spanner(non ots ids nut 26 a/f) , spl spanner(non ots ids- rod assy) , spl spanner(non ots ids nut 33 a/f) , spl spanner(non ots ids-thred tube) , locator (for stabilizer bracket) , blanking plate (breakaway coupling) , bleed adapter for air conditioning bleedingair checks , master cylinder filler unit adapter , oil seal pressing tool (igb assy) , oil seal insertion tool (igb assy) , insertion tool (tgb assy) , seal pressing tool (tgb assy) , hexagon head with pin for eo pod , extended allen key-eo pod , special tool (shurlock puller) , mandrel with nut , seal pressing tool (tgb assy) , media-tds alignment , levelling bar (for h/c levelling ) , levelling bar (for h/c levelling ) , levelling bar (for h/c levelling ) , insertion tool , insertion tool for oil seal (igb) , plug for rigging tool(tr) , dummy feed hose (power plant) , inst/removal tool (firewall) , alignment tool (tds bracket & igb) , pressing tool (oil seal tgb ) , defuelling hose and adapter

Blanking Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector