Latest bolt machine Tenders | Government bolt machine Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government And Public Sector

CTN :45730196

16 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of lock bolting machine with power pack and tool size- 1/2, 3/4, 5/8" & 7/8" for manufacturing of new wagon with all concomitant accessories as per annexure-a & b. make: stanley, huck, avlock, hitesh udyog or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45733162

01 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply spare parts of power pack assembly of huck bolting machine compatible with power pack unit of orione make huck- bolting machine model no.-ohpl-p540, as per attached annexure, qty.- 01 set. (one set consist of sl. no. 01 to 14, total nos. of items-64 nos.) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45717821

22 Jul, 2026 NA

Katni - Madhya Pradesh

Tender For supply of huck bolt machine as per attached annexure - a [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

Central Government/Public Sector

CTN :45681996

07 Jul, 2026 NA

Multi City - Multi State

Tender For supply of hydraulic hose pipe set 15 meter for hydraulic power rig for lock bolting machine, avlock part no. hs14 or equivalent . [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45652674

20 Jul, 2026 NA

Katni - Madhya Pradesh

Tender For corrigendum : supply of huck bolt machine as per attached annexure - a [ warranty period: 30 months after the date of delivery ] ]

CTN :45333105

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of nut steel bsf 5 8 , nut plain hex m12 , ss bolts 8 4 5 mm , ss bolt size 8 55 mm pitch 1251 mm , ss bolts 8 65mm pitch 1 25mm , bolt size 46 45 mm pitch 2mm , gi bolt and nut 8 35 mm , ss bolt with nut hex head m 10 35mm , bolt 14 45 mm , bolt brass and nut 6 18 mm x length ft head , screw steel 1 x 0ba , nut plain hex head m 8 , screw ba pb hex head 1 x 0ba , screw machine ok slotted hd m 12 40 mm , screw , ss hex screw 8 25 mm , hex hd full tread s s screw size m 12 x 25 pitch 1 75 mm , hex head full thread ss screw size m 8 25 pitch 1 25 mm , bolt bsf precision r steel hex hd zinc plated 7 8 2 1 2 l , bolt hex bsw 5 8 3 , bolt steel ht 5 8 4 , steel bolt and nut m 8 75 , ms bolt and nut m 20 65 , bolt machine hex hd precision pitch phospted steel 4 6 m 20 , bolt machine hex precision brass m 10 35 mm , bolt machine hex head m 14 25 mm , brass bolt m 8 45 mm , brass bolt m 10 35 mm , bolt machine hex ms m 6 40 mm , bolt hex m 16 45 2 mm , bolt machine hex hd ms plated m 20 65 2 5 mm , studs bsf h t steel plain 7 8 2 3 4 long length of metal , stud steel bsf 7 8 4 round h t screwed , stud h t steel 5 8 unc 2 long , stud ht steel 3 4 7 2 , nut hex 7 8 bsf carbon molybdenum copper plated , washer spring single type 4 4 23 2 3 mm , ss bolts 14 60 mm full threaded pitch 2 mm , nut stainless steel 10 mm pitch of thread 2 mm non magnetic , ss washer 8 4 mm id 17 mm od 1 6 mm thk , ss washer 10 5 mm id 21 mm od 2 mm thk , ss bolt 20 60 mm full threaded pitch 2 5 mm , ss washer 13 mm id 24 mm od 2 5 mm thk , ss bolt 16 60 mm full threaded pitch 2 mm , ss bolt 20 70 mm full threaded pitch 2 5 mm

CTN :45643323

29 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply spare parts of power pack assembly of huck bolting machine compatible with power pack unit of orione make huck- bolting machine model no.-ohpl-p540, as per attached annexure, qty.- 01 set. (one set consist of sl. no. 01 to 14, total nos. of items-64 nos.) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45637786

22 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap released ferrous from lcw and others consisting of corroded material, ms cutting wagon plate, corroded plates, old sheet, drums, pipes, all type of junction & location box, all types of ms boom, crimping tool, mike with stand, fire bucket, tool kits, gas blow lamp with gas tank, first aid box, hexa frame , double ended spanner set, cutter, twizer, hammer, scrw drivers, ring spanner, plier, different type of drill bit, box spanner, rotar oil pump, de ring spanner, file half round, different size of racks, attenuator, allen key, grider machine, pully single way, goodrej lock, pad lock, vice bench, chisel, file flate, tourch hand cell, ic remover different type, hack saw, socker wrenall type of ms, steel wires, corroded angle, channel, signalling item, signal post, base, connecting rod,electric fitting, panel,loco related materials board wire rod saria, panel, almirah, chair, table small pieces of ms/cs, iron rod, side body fillter jali and other corroded misc.items of all type of ms/cs kachra of sorts and sizes and old used unserviceable., (except wta items, spring, rail).. ( 04 nos. cutting allowed in junction & location box & 01 nos. cutting allowed if material is long than length of loading truck). material should be loaded with one end from lot as per description. mode of delivery by actual weight. fdp 40 days.

Bolt Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector