Latest bolts Tenders | Government bolts Tenders

State Government

CTN :45586913

17 Jul, 2026 3.72 Crore

Ambala - Haryana

Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibre optic cable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

State Government

CTN :45587085

17 Jul, 2026 5.08 Crore

Ambala - Haryana

Tender For tender for supply of raising height of transmission line -earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7 a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric type t_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge lumsum n_s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns square or rectangular or polygonal in plain ref no. 9.4 of pb csr2020 , reinforced cement concrete m-20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30degree-60degree bx__36m , m60-3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , design , testing , fabrication , supply , erection including foundation of 220 kv monpole pd 30degree_60degree bxa_24m , m56_2500lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc.complete in all respect. , cpri vetting charges of monopoles , supply of stubs of 220kv m_c tower type nmd krr design weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg , supply of tower body including extension of 220kv m_c tower type nmd plus 6 mtr. extn. krr design weight 18905.99 kg ht and 11081.5 kg ms ncluding gi nuts and bolts weight 1316.41 kg , supply of stub template suitaible for 220kv m/c tower type nmd plus 6 mtr. extn. krr design weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , circuit plate set of 2 , anti climbing device acd with concertrina wire , acsr conductor zebra 0.4 sq inch copper eq. , earth wire 7_3.15mm , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , single tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , single tension hardware fitting suitaible for earth wire size 7_3.15mm , straight joint for earth wire size 7_3.15mm , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for earth wire size 7_3.15mm , bird guard set of 3 , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , erection of towers , stringing and sagging of conductors , earth wire and accessories , including tack welding of bolts (about 750 bolts) complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45604125

25 Jun, 2026 NA

Tekanpur - Madhya Pradesh

Tender For supply of set of safety washer (vs type) as per clw drg. no. 1209-01.411-046. article no 004,006 & 008. each set consisting of following 03 items 348 nos :-- (1) safety washer article no . 004,size vs12 for gear cases of wag-9/wap-7loco, height of washer will be 1.65 mm to 2.1 mm as per schnoor starand qty/ set =252 nos (2) safety washer article no . 006,size vs20 for axle cap bolts of wag- 9/wap-7 loco height of washer will be 2.21 mm to 2.6 mm asper schnoor starand qty/ set = 48 nos . (3) safety washer article no . 008,size vs30 for axle box clamping plate bolts of wag-9/wap-7 loco height of washer will be 2.34 mm to 2.80 mm as per schnoor starand qty/ set = 48 nos . [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45604562

25 Jun, 2026 NA

Amravati - Maharashtra

Tender For supply of bolts m.s.black hex head round body without nut m12 x 50 mm to is: 1363:2002 (part 1). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45604065

08 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of bolts hex head high tensile m16 x50mm to is 1364/part i/92 reaffirmed 1998 third revision property class 8.8 (reserved for nsic unit) [ warranty period: 30 months after thedate of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45604145

22 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of various material - acetylene , admixture , air hose , aldrop 30 cm , bamboo 25 mm , binding wire , brick , butt hinges iron 125 mm , cement (50kg bag) , coal tar paint , copper plate , copper water stopper 16 gauge , cotton waste , crushed sand (excluding royalty charges) , curing compound , delay detonator , diesel , drill rod , electric detonator , empty cement bag , epoxy paint , explosive kelvex-220 , fibre fibrillated polypropylene fibres (910) of any grade of concrete) gm/cum , first aid kit , fly ash , fuse coil , g.l.pipe 100 mm dia. , g.p. electrodes 4 mm , gelatin , geru , ggbs , 2 goggles , hand gloves , handle iron 125 mm. , hook iron & eye oxi 75 mm , hose pipe oxygen & da , j-bolt (for soldier fixing) , kerosene , lh.electrodes 4 mm , 2 latches 250 mm , metal size 40 mm & above (excluding royalty charges) , metal size less than 40 mm (excluding royalty charges) , 3 nails 4 cm , natural sand (excluding royalty charges) , neoprene pad , non teak wood , 7 nozzle-3/64 , nut bolts , nut bolts & washer , nylon rope , oil paint , 2 ordinary detonator , 3 , p.v.c. water stopper, 310 mm wide central , bulb type , painting brush 4" , pickaxe , pin header of standard size , plum bob , polyethylene film 200 gauge , primer , red oxide , rust cleaner , safety helmet , safety shoes , sand blast gun nozzle , shalitex super expansion pad-12 mm thick , spinning belt , spirit level 150 mm. , steel , stone (excluding royalty charges) , stone chips (excluding royalty charges) , super plasticizer , tower bolt irons 200 mm , tower bolt from 250 mm , tripod for chain pully block , turpentine , water , water proofing compound , welding cable 600 amp , welding holder , white glass , wire brush 8 , wire mesh 50 x 50-13 gauge , zinc base oil paint , zinc rich epoxy primer (90%) , gfrp rebar (6 to 16 mm diameter) , gfrp bent rabar (6 to 16 mm diameter) , high strength flexible geogrid (design strength 60 kn/m) , high strength flexible geogrid (design strength 120 kn/m) , high strength flexible geogrid (design strength 195 kn/m) , high strength flexible geogrid (design strength 260 kn/m) , high strength flexible geogrid (design strength 325 kn/m) , uv resistant needle punch non woven geotextile (150 gsm) , geosynthetic drainage composite , mechanically woven double twisted hexagonal shaped wire mesh gabion boxes (zine+pvccoated) , mechanically woven double twisted hexagonal shaped wire mesh gabion boxes (zinc+10% al alloy+pvc coated) , muchanically woven double twisted hesagnanal shaped wire mesh gabion boxes (zinc+high abrasion resistant polymer class a coated) , lacing wire

Central Government/Public Sector

CTN :45337704

30 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For corrigendum : supply of fish bolts and nuts of size 25 x 350 mm to rdso drg no. t-11530 alt. 2 or latest alterations if any, use for points & crossing, confirming to irs specifications serial no.t-23: 2021 (redrafted) or latest amendment if any. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45603989

03 Jul, 2026 NA

Kota - Rajasthan

Tender For supply of 1/2 inch (12.7mm) dia zinc plated/galvanized lock bolts with collar with grip range 24-31, oneset consisting of 01 nos lock bolt & one no. of collar. lock bolt part no lbrs-1616 g & collar part no. lcss-16 g, as per rdso drg. wd-11036-s-01 alt-1 & wd-11036-s-02,alt-nil and confirming to spec. is/rdso-wd/0001:2022 of june 2022 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45604803

26 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of 3/4 inch (19. 1 mm) dia zinc plated/galvanized lock bolt , grip range 18 to 25 mm. one set consisting of 01 no. lock bolt & 01 no. collar (lock bolt part no. lbrs-2412 and collar part no. lcss-24g) asper rdso's drg. no. wd-11036-s-01, alt-1 & wd-11036-s-02. material and confirming to spec. is/rdsowd/0001:2022 of june 2022 or latest & specification as per drawing. the head of the lock bolts necessarily be marked with manufacturer identification. the marking on collar should be done on lower bottom surface. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Bolts Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors