Latest bolts Tenders | Government bolts Tenders

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government / Public Sector

CTN :40005047

28 Apr, 2025 NA

Bongaigaon - Assam

Tender For supply of contact brush pn: hy102600490013916003 , space heater pn: hy102600490013933001 , scrapper ring pn: hy102600490013901054 , generator / lgb coupling bolts & nuts

Central Government/Public Sector

CTN :40004381

24 Apr, 2025 NA

Bhadravati - Karnataka

Tender For supply of ms hex head bolts and nuts - ms hex bolts along with nuts nr thread m8 x 40 , ms hex bolts along with nuts nr thread m10 x 50 , ms hex bolts along with nuts nr thread m12 x 30 , ms hex bolts along with nuts nr thread m12 x 50 , ms hex bolts along with nuts nr thread m12 x 60 , ms hex bolts along with nuts nr thread m12 x 130 , ms hex bolts along with nuts nr thread m12 x 175 , ms hex bolts along with nuts nr thread m16 x 40 , ms hex bolts along with nuts njct plus jd m16 x 50 , ms hex bolts along with nuts nr thread m16 x 65 , ms hex bolts along with nuts nr thread m16 x 70 , ms hex bolts along with nuts nr thread m16 x 75 , ms hex bolts along with nuts nr thread m16 x 80 , ms hex bolts along with nuts nr thread m20 x 50 , ms hex bolts along with nuts nr thread m20 x 60 , ms hex bolts along with nuts nr thread m20 x 70 , ms hex bolts along with nuts nr thread m20 x 75 , ms hex bolts along with nuts m20 x 80 , ms hex bolts along with nuts nr thread m20 x 90 , ms hex bolts along with nuts nr thread m20 x 150 , ms hex bolts along with nuts nr thread m20 x 250 , ms hex bolts along with nuts nr thread m22 x 100 , ms hex bolts along with nuts nr thread m22 x 175 , ms hex bolts along with nuts nr thread m24 x 50 , ms hex bolts along with nuts and washer m24 x 120 , ms hex bolts along with nuts m24 x 125 , ms hex bolts and nut nrthd m 24 x 180 , ms hex bolts and nuts nr. thrd. m 30 x 60 , ms hex bolts and nuts normal thread m 30 x 100 , ms hex bolts nuts normal thread m 30 x 120 , m s hex bolts and nuts nr thd m 30 x 150 , ms hex bolt and nut 30 x 200 mm , m s hex bolts and nuts m 30 x 250 , m s washers m 14 , m s washers m 18

corporations/Associations/Others

CTN :39992364

02 May, 2025 NA

Bankura - West Bengal

Tender For supply of complete acw pump with coupling halves of both pump and motor side, coupling bolts but without motor , complete tdmcw pump with coupling halves of both pump and motor side, coupling bolts but without mot , complete bdmcw pump with coupling halves of both pump and motor side, coupling bolts but without mot , complete dm make-up pump with coupling halves of both pump and motor side, coupling bolts but withou

corporations/Associations/Others

CTN :40004712

03 May, 2025 NA

Tirunelveli - Tamil Nadu

Tender For supply of trauma implants - plate set stainless steel , femoral neck fracture fixation system set , trochanter femoral nail with augmentation set , four mm cancellous screws with washer set , six point five mm cancellous screws set , four mm ccs set , six point 5 mm ccs set , drill bit large ss , drill bit large ss , drill bit small ss , special drill bit , k wires ss small , k wires ss medium , k wires ss large , ss wires , titanium elastic nail system - set , dhs or dcs plates and screw set , tibial external fixation set ss , femur external fixation set ss , knee spanning external fixation set ss , ankle spanning external fixation set ss , tibial lrs external fixation set , femur lrs external fixation set , metaphyseal long bone fracure lrs set , distal radius fracture fixtion lrs , tibial illizarov ring fixation set , bayonet k wire for illizarov fixation , olive wire for illizarov fixation , nuts for illizarov fixation , bolts for illizarov fixation , wire fixation bolt slotted for illizarov fixation , wire fixation bolt cannulated for illizarov fixation , threaded rod for illizarov fixation , male post for illizarov fixation , female post for illizarov fixation , rancho cubes for illizarov fixation , extension plate for illizarov fixation , clamps for hybrid fixation for illizarov fixation , spanner for illizarov fixation , hinges male for illizarov fixation , hinges female for illizarov fixation , carbon half ring for illizarov fixation , carbon ring 5 8 for illizarov fixation , washers for illizarov fixation , illizarov telescopic graduated distraction rod , italian arch for illizarov fixation , coventry staples , ordinary staples , antibiotic beaded cement , prp kit , 3 point 5 mm locking screws , 3point 5 mm cortical s screws , 4 point 5 mm locking screws , 4 point 5 mm cortical screws , 2 point 4 or 2 point 7 mm locking screws , 2 point 7 mm cortical screws , universal clamp for external fixator ss , 5mm conical schanz screw ss , 6mm conical schanz screw ss , tube to tube universal clamp ss , tubular rod ss , suprapatellar tibial interlocking nail set , ankle lateral ligament tear reapir or recon set , suture anchors 5mm with needle , suture anchor 6mm with needle , suture anchors 3mm with needle , rotator cuff tear repair suture anchor complex set , knotless suture anchor , biotenodesis screw , acromioclavicular joint fixation set , acl ligament reconstruction set

State Government

CTN :40000964

12 May, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of stud bolts - 9 items

corporations/Associations/Others

CTN :40003034

17 Apr, 2025 13.79 Lacs

Multi City - Andhra Pradesh

Tender For supply of gym equipment of chennupati ramakotaiah indoor stadium in 11th division. 1st call general funds - "providing and fixing of gym rubber mat flooring tiles of size of 500 x 500 mm and thickness of 15 mm,interlocking type of vulcanized virgin rubber of design and colour and with excellent impact bearing, tough on falling weights, protection to sub floor, sound absorbing & highly durable complete as per directions of engineer - in -charge. make - ecoflex, bioflex, fitflex or equivalent. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", "providing hack squat machinestructure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. weight stack: m.s weight stack; having 7.5 kg each plate weight fitted with 2 nylon bushes to avoid noiseless operations. guides: stainless steel guide rods of 25mm thick is used. bearings: lubricated high grade 'zz' steel ball bearing. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cables: 6mm nylon air craft cables are used. pulley: pulleys made up of high quality nylon with deep grooved to support cable and double 'zz' bearing with m10 pin ensures superior strength and longevity.cushion / padding: seats cushion and pads are made up of 2"" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl.hardware: hardware used are button head bolts and made up of high tensile steel.powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps.handgrips: hand grips is used on handles wherever necessary made up of high quality rubber. foot pad: high quality rubber foot pad. digital repetition counter for each exercise/workout sets. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", providing multi adjustable bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cushion/padding:seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps. foot pad: high quality rubber foot pad. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. , providing flat bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure cushion / padding: seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically

CTN :40004866

02 May, 2025 NA

Darjeeling - West Bengal

Tender For supply of prefabricated shelter structure for ffl of size 2 point 4m x 1 point 28m as per drawing , non skid ceramic tiles of size 300 x 300 x 7mm , quick setting compound , led bulb 10 watt cool day light suitable for domestic lamp holder , angle holder made of backelite lamp holder should be insulated type , pvc insulated and pvc sheathed multistranded copper conductor flexible industiral cable 1100 volts , ceiling rose pvc , pvc square block , pvc conduit pipe 20mm 10 ft long , pvc tee 20 mm , pvc circular jn box 2 to 4 way , pvc shaddle with screw , mcb 6 amp single pole 240 watt , surface plastic box suitable for modular switches and socket of 8 module , solid plate with base frame suitbale for surface plastic box of 8 module , switch piano modular type 10 amp one way , socket multi purpose 3 pin 10 amp and 3 pin 20 amp modular type of 2 module , tape insulation 10 mtr , pvc copper cable 1 sqmm single core wit multistranded conductor for earth wire in green colour , pvc sheathed frls copper cable 1 point 5 sqmm s c with multistrand roll of 91 point 44m , pvc sheathed frls copper cable 2 point 5 sqmm s c with multistrand roll of 91 point 44m , xlpe cable pvc insulated aluminium conductor served with inner sheathing of pvc tape armoured with galvanized steel wire overall pvc sheathed cross sectional area 10 sqmm 2 core , iwc vitreous ceramic china squatting pan size 580x 440 mm incl foot rests complete , pvc vent pipe 75mm dia 8 ft long with pvc cowl alongwith suitable arrangement for fixing , hdpe water tank cylinderical vetical with closed top 1000 ltrs with connector 20mm stop cock and float valve including rod and ball , water staging platform made of ms angle of size 40x40x6 mm the overall size of the staging shall be 2 point 4m above ground level with the water tank platform of size 1 point 5 x 1 point 5m , ppr pipe 20mm dia as per is 15801 , ppr tee 20 mm dia , ppr elbow 45 degree 20 mm dia , ppr socket 20mm dia , ppr nipple 20mm dia 150mm long , ppr union 20 mm , pvc clip for ppr pipe 25mm dia , ppr reducer socket 25 x 20mm , ppr tank connector 25 mm , bib tap 20 mm stainless steel , m seal good quality , pvc p trap of iwc , pvc flusing cistern 10 ltrs capacity with pvc connection and waste pipe angle and pvc pipe , ppr male threaded elbow 20x15 mm dia , ppr female threaded elbow 20x15 mm dia , ppr ball wall 20mm dia , pvc elbow 110mm dia , pvc tee 110mm dia , pvc pipe 110mm dia , cover for septic tank of size 1500 mm x 2000 mm made of ms angle 40x40x6 mm with a mesh of ms plates of width 40 mm x 3 mm , plaster trowel with woodwen handle , plumb bob iron best quality , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 1 kg , double end spanner for 16 mm dia nuts and bolts , showel square nose 14 gauge tata high carbon steel product code svl 022 blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , fish line , electric tile cutting machine with 5 nos inter changeable blades , measuring tape 3 mtr , gi sheet cutter scissors , transperant pipe 5 mm dia bore for water leveling , multipurpose non-slip rubber reusable gloves , gum boots , screw driver , industrial safety helmet

CTN :40004893

02 May, 2025 NA

Darjeeling - West Bengal

Tender For supply of threaded screw 1 inch , conduit pipe 20mm dia 10 feet long , pvc tee 20mm , pvc elbow 20mm , pvc circular jn box 2 to 4 way , pvc shaddle clip with screw , ceiling rose pvc , pvc square block , tape insulation 10 mtr , mcb db spn 8 way double door 240 volts with bus bar , mcb 6 amps sp , mcb 20 amps sp , mcb spn 40 amps 240 volts , exhaust fan 300mm sweep with louver shutter , pendent holder made of bakelite , lcs complete set with all accessories , elect earthing compelte set , hot water boiler of capacity 500ltrs , puf insulated 55mm thick water tank 1000 ltrs with gi flange for connection with nipple and gasket , water staging platform made of ms angle of size 40x40x6 mm , ppr pipe 20mm dia , ppr pipe 25mm , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20 mm , ppr elbow 25mm , ppr elbow 90 degree 25mm , ppr male threaded socket 20 to15 mm dia , ppr female threaded socket 20 to15 mm dia , ppr female threaded elbow 20 to15 mm dia , ppr male threaded elbow 20 to15 mm dia , ppr socket 20mm dia , ppr socket 25mm dia , ppr union 20mm , ppr union 25mm , ppr reducer 25x20mm , ppr reducer tee 25x20mm , bib tap brass chromium plated sutable for 15mm ppr water supply line , ppr balve valve light weight brass 25 mm , ppr balve valve light weight brass 20 mm , ppr balve valve light weight brass 15 mm , pvc clip for ppr pipe 25mm dia , pvc clip for ppr pipe 20mm dia , ppr reducer elbow 25x20mm , ppr male threaded tee 25x20mm , pillar cock brass chomium plated , taeflon tape , pvc float value heavy duty 25mm dia suitable for ppr pipe , 25mm pp to r tank connector , pre fabricated septic tank of 2000 ltrs capacity , prefabricated soakage pit of 1000 ltr capacity , pvc pipe 4 inch dia 6 mtr long heavy duty type a having 5 kg pressure oblique sqcm , pvc socket 4 inch dia , pvc elbow 4 inch , pvc tee 4 inch , pvc floor trap 4 inch dia with grating 4 inch outlet , iwc stainless steel pvc p trap inlet 4 inch dia with 4inch outlet complete , pvc flusing cistern 10 ltrs capacity with pvc connection and waste pipe angle and pvc pipe , stop cock cp 25 mm , wash hand basin 500x400mm steel with waste pipe and coupling , vitreous china bowl urinal flat back white of size 465x355x265 mm , looking mirror size 450 x 600 x 5 point 5 mm thick with 4 mm , stainless steel peg stay contains 4 hooks fancy type , soap dishes stainless steel size 10cmx12cm , towel rail cp 600mm long , plaster trowel with woodwen handle , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 1 kg , double end spanner for 16 mm dia nuts and bolts , showel square nose 14 gauge blade size 310 x 245mm shaft size 710mm fitted , fish line , hammer ball pine 1kg , electric tile cutting machine with 5 nos inter changeable blades , measuring tape 3 mtr , gi sheet cutter scissors , transperant pipe 5 mm dia bore for water leveling , multipurpose non slip rubber reusable gloves colour og oblique black , full body safety harness light weight designes with breathable open core padding technology , gum boots for snow fall area , screw driver , portable drill machine with 06 nos 8mm dia bits , industrial safety helmet

CTN :39711513

16 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2506 svl pd with ohp as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , water proofing compund conforming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata , sail , jsw , cement based paint snowcem make-berger , asian , nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched , weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian , berger , neroloc , synthetic paint enamelled og conforming to is 5-2004 make-asian , berger , nerolac , thinner. make-nerolac , berger , asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata , sail , jsw , prefeb mild steel door of size 750x 1800mm double shutter , outer frame made out of isa 40x 40x6mm and door shutter frame make-tata , sail , jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , loop holes 780 x 300 mm make-tata , sail , jsw , loop holes 1000 x 300 mm make-tata , sail , jsw , loop holes 1250 x 300 mm make-tata , sail , jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal , tata , kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings , drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto , polycab , finolex. , charcoal , salt

Bolts Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government

corporations/Associations/Others