Latest boundary gate Tenders | Government boundary gate Tenders

Central Government/Public Sector

CTN :45174701

26 May, 2026 NA

Multi City - Kerala

Tender For auction sale of rolling stock - pl no. 98111061, condemned and over aged bg-8 wheeler icf coach no. special repair wgscn 054562 (year built 2005) without bogie in grounded condition with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc and already removed rc items. mechanical rc items 1] buffer plunger and casing 4 nos 2] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 3] distributer valve complete full set 1 set, 4] main doors -4 nos 5] overhead water tank-4 nos 6] adapter for cut off angle cock- 4 nos. 7 ) cut off angle cock -4 nos. electrical rc items 1] alternator to regulator wire (copper)-1 kg. already removed rc items a) mechanical items 1] complete bogie arrangements including wheel sets 2 nos, 2] wearing piece( bronze) and plate 4 nos each.3] bogie mounted brake cylinder 4 nos. b) electrical items 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w night lamp -10 nos, 4] 9 w mirror lamp-2 nos, 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery -13 nos. 8] battery tray- 4 nos. 9] rotary switch with panel board- 1 no. ds-8 no. 334551 dt 18.04.2026, custodian sse/c&w/pgt, location near pgt/memu shed.

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

CTN :45281940

30 May, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of cook house dinning hall partly fems dh, supply of constr material, supply of structural material, supply of elect items, supply of misc items - cement , steel (structural , steel & tmt) , pre colour coated , plain galvanized , iron sheet (ppgi) , with zinc coating , 120gm , pre-profiled , polycarbonate , sheet , cgi/pgi sheet 24 , guage , puf /pir panels , glazed ceramic , tiles/non- skid , ceramic tiles/ , vitrified tiles , aluminum sections , for , door/window/fram , es/ , partitions , aluminum extruded , alloy fittings for , aluminum doors/ , windows/ puf , panel doors , m/s builders , hardware , mortice lock , diesel generator , set , (air cooled above , 3.5kva upto 15 , kva) , diesel generator , set , (liquid cooled , above , 15 kva) , generator set , (portable) (below , 3.5 kva) , submersible , pumps/ motor with , starters , motor starters , multi strand copper , wires , lt electrical cable , 1100 volts, xlpe , electrical fittings , mcb/mccb/db/isol , ators/ change over , switch , cfl fittings/ lamp , led fittings/ lamp & , led tube light and , accessories , halogen lamp , led solar lights , led solar lantern , led street light & , accessories , wall mounted heat , blower , electrical exhaust , fan/ extractor , fan/ventilator fan , fire extinguisher , smoke alarm , water heating , device (electric) , (geyser) , steel tubular poles , (swaged) , pvc casing capping , pvc conduit pipe , circular , insulation tape , (electric) , solar panel , solar hybrid wind , turbine , solar hybrid , pcu/invertor , battery lithium- , ion/lithium , phosphate , battery lead acid , voltage stabilizer , cp sanitary fittings/ , bathroom cabinets , vitreous china , sanitary , appliances/fittings , (english wc/ wash , basin etc) , ppr pipes & , accessories , water closet seat , cover , pvc flushing , cistern , hdpe water , storage tank , puf tank , frp septic tank , stainless steel sink , looking mirror , glasses (plain , head / frosted) , toughened glass , pvc pipes including , fittings , standard wide , gauge pipes , stainless steel , western commode , stainless steel , wash basin , mattress , pvc furniture (chair) , office furniture , steel almirah , ply wood/ pre laminated , particle board/ fibre , board (medium density)/ , teak face ply , laminated sheets , adhesive , power tools , hand tools , synthetic enamel , paint/printer , oil bound distemper / , cement based paint , unplasicized polyvinyl , chloride - upvc , windows, doors) , wooden door , ply board /ply wood , false ceiling , quick setting compound , magnetic hinges , turbo vent , bain marie , hamam 1kl with motor , gate valves , chemical earthing , flame proof light fitting , hydraulic door closure , spring , ci manhole cover , frame , steel wire rope , insulation (puf) for pipes , electrical chimmney , sheet metal enclosure , and lt panel , kero heater , bukhari (field heating , device) , loft tank

CTN :45282015

01 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter system) capacity 3

CTN :45239371

25 May, 2026 2.52 Crore

Malkangiri - Odisha

Tender For repair/renovation of main school building i/c painting both exterior and interior, toilet, staircase, classroom, windows, doors, chajja, flooring etc i/c electrical services with providing and fittings of fans, compound lighting, lt panel at kv malkangiri, (odisha)

CTN :45249612

29 May, 2026 57.56 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For construction of 02 additional class room, boundary, gate and renovation at govt. hs harana sarangpur block (udise code 23300407504) distt. rajgarh

CTN :45264408

29 May, 2026 1.99 Crore

Rajgarh-Mp - Madhya Pradesh

Tender For construction of 05 additional class room, boundary, gate, renovation and toilet at govt. hs kadlawad sarangpur block (udise code 23300408904) distt. rajgarh

CTN :45264425

29 May, 2026 1.59 Crore

Rajgarh-Mp - Madhya Pradesh

Tender For construction of 05 additional class room, boundary, gate, renovation and toilet i/c internal electrical work at govt. hss bhyana sarangpur block (udise code 23300402911) distt. rajgarh

CTN :45219425

29 May, 2026 1.63 Crore

Vidisha - Madhya Pradesh

Tender For construction of 5 additional room, boundary, gate, renovation and toilet i/c internal electrification work at govt. hs sunkher, block (udise code 23310416205) lateri, distt. vidisha

corporations/Associations/Others

CTN :45275080

04 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/731 - dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm., dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead., dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. leada.of area 3 sq.m. and below, clearing debris includes civil/elect items from site and disposing the debris 10km away from the site including loading unloading labour charges and clearing the site good for work etc.complete, providing and fixing of double leaf door with cnc cutting as per design made in -20mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary hettic soft closing fittings etc. complete, providing and fixing of single leaf door made in -12mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary fittings etc. complete, providing and fixing of partition board paneling with aluminium frame work of section size 50mmx25mm vertically and horizontally at 600mm c/c with 12mm thick plywood, top with 3mm thick veneer sheet and using ss pvd coated t patties and pu paint and melamine polish for smooth finish, using century ply or equivalent brand for panelling and fixing with necessary screwing and supports etc.complete, supplying of fire sensor / smoke detector-10nos / existing sprinker replacement / relocation / wiring / hooter panel etc, providing and fixing vitrified double glazed finished of 10mm thick tiles of size 8ft x 4ft in floor, treads or riser of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry filling tile joints with matching pigment and make of of kajariya/ simpolo of any colour as specfied by engineer in charge etc.complete., proving and fixing false ceiling of 1.5mm thick aluminium powder / anodised / painted / coated -profiled panels mounted on ms/ gi frames for support and painted / powder coated chanels / with provision for ac trap, door and light fixing,as per engineer incharge etc.complete, providing and laying in position (1:11/2:3) reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1 coarse sand:3 graded stone agg 20mm nominal size) c. in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level, supplying and fixing of window / roller blind made in100% polyster fabric design plain and colour as per engineer in charge, providing and fixing of 3+2+1+1 seater sofa set made in sal wood frame with high density foam as design as per drawing and engineer in charge, supplying and fixing of designer artifacts showpiece design as per drawing and engineer in charge, supplying and fixing of nylon based carpet 5 mm thickness with backing design as per drawing and engineer in charge, supply and placing in position artificial planters with ceramic pots etc complete as shown in the drawing and as directed engineer incharge., design & supply of signages made from 2mm thick external grade acp sheet of size (wall mounted) with high grade plotter-cut/cnc-cut vinyl & auto-glow vinyl pasted lacquering of letters/pictogram on front side of the plate, of varying colours as per detail drawing and engineer in charge., supplying and fixing of pa - speaker wiring with 6nos ceiling mount speaker to be connected to existing pa system including cabling ,fittings accessceries and necessary supports etc complete., supplying and fixing of light fittings of make -hybac /haffle /phillips / panasonic/ anchor/

Boundary Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others