Latest bus bar scrap Tenders | Government bus bar scrap Tenders

corporations/Associations/Others

CTN :45263412

04 Jul, 2026 NA

Pudukkottai - Tamil Nadu

Tender For corrigendum : supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure p

Central Government/Public Sector

CTN :45365856

27 Jun, 2026 20.00 Lacs

Udaipur - Rajasthan

Tender For corrigendum : repair / maintenance to overhead lt lines, ug lt lines, lt panels, bus bar chamber and connected works at mil stn udaipur under age (i) udaipur

Central Government And Public Sector

CTN :45617309

10 Jul, 2026 NA

Surat - Gujarat

Tender For tender for supply of siemens make shutter lifter part no 8pu15880ds010aa0 , siemens make holder for ip for trolley part no 8pu15880di010aa0 , siemens make assembly for bottom lever draw out component part no 8pu15880dh010aa0 , siemens make assembly for top lever drawout component part no 8pu15880dh020aa0 , siemens make bottom bugel for drawout component part no 8pu15880db010aa0 , siemens make top bugel for drawout component part no 8pu15880db020aa0 , siemens make u clips for drawout component part no 8pu15880fg040aa0 , siemens make support for earthing spring drawout component part no 8pu15880de020aa0 , siemens make 9 way socket assembly t&s drawout component part no 8pu15880dt030aa0 , siemens make power lyra contact 125 amp part no 8pu15880dl010aa0 z s25l10 , siemens make 400 a plug assembly l small for siemens make lt panels part no attachement , siemens make 400 a plug assembly z small for siemens make lt panels part no 8pu15880dl030aa0 , siemens make guide latch for top bottom draw out component cat no 8pu15880dg010aa0 , siemens make mould assy bare o by g drawout component 125 amp part no 8pu15880dm010aa0 , siemens make mould assy silver o by g drawout component 400 amp part no 8pu15880dm020aa0 , siemens make shutter part no 8pu15880fg030aa0 , siemens make large frp guard part no 8pu15880fg020aa0 , siemens make small frp guard part no 8pu15880fg010aa0 , siemens make vertical connection support bottom part no 8pu15880fv010aa0 , siemens make vertical connection support top part no 4 03 08094 001a , siemens make vertical connection support middle 60 x 6 part no 8pu15880fv020aa0 , siemens make vertical connection support middle 50 x 6 part no 8pu15880fv030aa0 , siemens make cage nut part no 4 03 01049 101 , siemens make door fixing screw , washer and nut part no 4 16 02828 001 , siemens make dp gasket for siemens make lt panels foam gasket , siemens make rubber profile door edge for siemens make lt panels ip profile gasket , siemens make rubber profile for instrument plate for siemens make lt panels ip profile gasket , siemens make hinge pin for siemens make lt panels part no 3 03 15441 001a , siemens make hinge socket for siemens make lt panels part no 4 03 08053 001b , siemens make vertical trough assembly complete with cu bus bars for siemens make lt panels 60x6 sq mm for 8pu s1 5 type panel , siemens make ryb copper busbars for 8pu s1 5 type panel 60x6 sqmm , siemens make vertical trough assembly complete with cu bus bars for siemens make lt panels 50x6 sq mm for 8 pu s1 5 type panel , siemens make ryb copper busbars for 8pu s1 5 type panel 50x6 sq mm , siemens make dp channel for 8pu part no 8pu154160271001 , siemens make blanking plate part no 8pu1540309628001 , siemens make support for drive shaft part no 8pu15880di020aa0 , siemens make nylon rivet part no 8pu154030807002 1 set of 500 nos , siemens make control bus clamp ms clamp part no 8pu1541600133001 , siemens make control bus clamp 3 way , siemens make control bus clamp 1 way , siemens make control bus bar support part no 8pu1541602132001 , siemens make new neutral bus bar support part no 8pu15000nbbs0aa0 , siemens make main bus bar support at the joints part no 8pu15000mbbs0aa0 , siemens make siepan 8pu lock and key assembly part no 8pu150000lka0aa0 , siemens make main horizontal bus bar support single part no 8pu1500mhbbs0aa0 , siemens make door sealing frame part no 3wx3686 0ja00 , siemens make 9 way plug assembly n drawout component cat no 8pu15880dt020aa0 , siemens make earthing spring for trolley part no 8pu15880de010aa0 , siemens make main busbar , aluminum 1x1x80x10 mm , length 560 mm , siemens make main busbar , aluminum 1x1x80x10 mm , length 1700 mm , siemens make main busbar , aluminum 1x1x80x10 mm , length 2550 mm , siemens make neutral busbar , aluminum 1x1x50x10 mm , length 560 mm , siemens make neutral busbar , aluminum 1x1x50x10 mm , length 1700 mm , siemens make neutral busbar , aluminum 1x1x50x10 mm , length 2550 mm , siemens make earth busba

Corporations And Associations And Others

CTN :45363921

26 Jun, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : supply of spares for instrumentation - "vfd pannel signal isolatorsr. no. 2306042013 make - multispampower supply ac 230 vi/p - 4 to 20 ma dco/p - 4 to 20 ma dcreguire boiler + mill + boiling house ", ash handling air pneumetic vibrator, pu elbow 1/4" one side thread - 10 mm, pu tee 1/4" one side thread - 10 mm, air filter 1/4" -10 mm, pu femal connector 1/4" - 10 mm, pu pipe-10 mm, sov double action 230 v ac 1/4", quick exhaust valve 1/2" cylinder, quick exhaust valve 1/4" for seal, "simens smart positioner sipart ps26 drs 110-0nn0- 0aa0ip 66/type 4xp- 1.4 to 7 barta- 30 dg c to +80 dg c", "dome power cylinder for ash handling model no. c 0631505sr. no. plt 20815/005 bore size 63mmstroke- 305 mmmake- duncam engineering limited (rnoia)", " turbine asco solonoide valve (red had type)brand ascotype - solonoide valve (electrno megnetic) 110 v dc", "limit switchmod no. lswp -1-02-4-a", "cesar bonettitype directional control valvesize / model- nf2pan 520 n00000", "valve limit switch box/ position monitormodel code klplubtg/16/05-26ingress protection- ip67 certifiedvoltage- 110 vdc", "wiring diagram explanation (013)type- close position switch", "product - cee em-45 limit switch model /type - cee em -45-50brand-jai bala ji", "pressure switch (switzer) model no. gm-201-33-b030-55-apressure range 0.4 to 4 bar", "proxy meter sensorsr. no. 23 h01p90output- 7,87 v/mm (200 mv/mil)w/o- 2456make - bently nevada", "siemens smart positioner sipart . ps26dr5 110-0nn0-0aa0ip 66/type 4xpr 1.4 to 7 barta 30 dgr c to +80 dgr c", "m00g pi servo amplifier ( valve driver)supply voltage - 24 vdccurrent 1 to 2 a", "signal conditioner/ isolatermake- pepperl +fuchs model - kfd2- stc5-1.20type- signal isolator/signal conditioner", boiling house hi tech m/c chennai bag clamping power cylinder with o ring kit, bag clamping rubber pad, limit switch for clamping, "plc omran dc - 12 v to 24 v zen 10 c dr - d- v2", smps (power supply 24 v), relay board channels, contector, controller unipluse f 701-s, pu connectors, male 1/4" - 8 mm, push button element no-nc, air filter regulator (afr) (0-10 bar), afr connectors, "load cell 110 kgmodel- 65023-110k-nc-02x make- vishay", proxy for load bucket, load bucket cylinder with kit o ring make janties, course fine cylinder with o ring kit make janties, sov ( solonoide valve) with base and coil make janties coil 220 v ac, coil only 220 v ac, load cell card hi- tech engineers, half inch ball valve (1/2"), "centrifugal machine (raw and refinery) afr (air filter regulator )connector femel - 3/8"" make janties ", "break limit switch make bch electric limited", solenoide valve (sov) single acting single coil with o ring kit, double acting double coil with coil 230 v ac and o ring kit, double acting single coil with coil 230 v ac and o ring kit make energy tech high tech pneumatic, coil 230 v ac for sov, hand operated pnumatics sov wtp high tech engineering, proxy type pnp supply 10-30 v type ps 2000 d make joy shree pune, pug mill valve sheet ( on/ off) size - 300 mm make aira, syrup seperator valve (on/ off) size 150 mm make - i& s system dehradun, r- valve pnumatic 1/4", boiling house refinery mbf control valve- 3" rubber seat, mbf on/off valve- 4" rubber seat, mbf on/off valve- 6" rubber seat, mbf on/off valve 3" rubber seat, melt concentrator 2" rubber seat hot water valve , 0-150 dgr c rtd pt-100 temp transmitter (tt), refinery ph electrode with transmitter, abb flow meter 3" model no. fep 63 y0a20080 a size 3", melt concentrator control valve 12" rubber seat , melt concentrator control valve 10" rubber seat , level transmitter (lt) make abb range 0-5000 mmwc remote seal type, control valve positioner make rotex model rtx 1000 -r-d-2-r1-2g-4r-nd-c-41 serial no. rtx/22/0873, multimeter make fluke, loop calibrator / milium source make masi bus, boiling house and boiler compressor k smart oil 200 l , oil filter element 150 lpm, air filter element, air oil seprator element kit, gasket , air oil seperator ele

corporations/Associations/Others

CTN :45585969

23 Jun, 2026 52.06 Lacs

Sonipat - Haryana

Tender For supply, installation, testing and commissioning of lt underground cables with allied items for various buildings in dbranl university, rai, district sonipat. - hsr part[23.22.1.12]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.12. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. 4 pole mccb 300 to 400 amp , 50 ka [through rate], [23.22.1.13]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.13. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. 4 pole mccb 600 to 800 amp , 50 ka [through rate], [23.22.1.3]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.3. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. triple pole mccb 16 to 100 amp, 25 ka [through rate], [23.22.1.5]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.5. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. triple pole mccb 200 to 250 amp, 25 ka [through rate], [23.22.5.1]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.1. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 6 amp. to 32 amp single pole [through rate], [23.22.5.7]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.7. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 6 amp. to 32 amp mcbs four pole [through rate], [23.22.5.8]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.8. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 40 amp to 63 amp. mcbs four pole [through rate], [23.22.8.4]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.4. sitc four pole on load manual change over switch in ss enclosure of following ratings 300 amp 415 volts [through rate], [23.22.8.5]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.5. sitc four pole on load manual change over switch in ss enclosure of following ratings 400 amp 415 volts [through rate], [23.23.6.4]miscellaneous 6.4. supply and erection of ms cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of engineer-in charge of the work. ms perforated cable tray painted with powder coating 600 x 50 x 2 mm [through rate], [23.23.7.4]miscellaneous 7.4. supply and erection of cable tray cover made of 1.25 mm thick gi sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of engineer-in charge of the work. gi cable tray cover , suitable for cable tray of 600 x 50 x 2 mm [through rate], [23.24.1]ms stand, bus bar chamber and panels 1. supply and erection of m.s. angle iron frame duly welded for housing m.s. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45417883

24 Jun, 2026 38.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair/ replacement of earthing , lt panel , mccbs, bus bar, changeover, painting of pole and other e/m miscellaneous work at bb cantt, srinagar

CTN :45587322

04 Jul, 2026 9.90 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of pvc insulating , empire tape , glass varnished tape , black tape , cotton tape , ctc 300ml bottle , crc 2-26 400ml , insulation varnish , thinner , beck-tol red , phase tester , combination plier , nose plier , continuity tester , insulation tester , digital multi , tong tester , padent holder , button holder , angle holder , s.c. holder , flush type switch , flush type , flush type socket , plug top , ceiling rose , novex paper , bakalite kit-kat , fuse carrier bakalite , alumunium lugs dowell , alumunium lugs , alumunium lugs dowell inchs , copper lugs dowell inchs , copper lugs dowell , dowell inchs , screw driver , d-spaner complete , ring-spaner complete , box spaner complete set , electric tool kit , pvc insulating sheathed , pvc insulating sheathed copper , pvc insulating sheathed copper conductor , pvc insulating sheathed alumunium conductor wireorcable , hylam bakalite sheet , bakalite rod , white fibre glass , teflon rod , fibre glass tube , inductive proximity switch , mtc coilor selonoid coil , mcb 1-pole 6 amp , mcb 1-pole 16 amp , mcb 2-pole 10 amp , mcb 2-pole 16 amp , mcb 2- pole 32 amp , mcb 2-pole 63 amp , mcb 3-pole 32 amp , mcb 3-pole 63 amp , mcb 4-pole 25 amp 440v , mcb 4-pole 40 amp 440v , push button station , push button , mushroom type push button , foot switch , micro switch , limit switch , dcr thruster , carbon brushes grade m15e , carbon brushes grade eg-224 , carbon brushes grade eg- 224-double , carbon brushes , armature for hand grinder , brass holder for carbon brush , slip ring , techo-generator dtg-4000 , techo-generator tdp-02-lt , synchronous timer em-1000 0 to 60s , synchronous timer em-2000 0 to 120s , synchronous timer em-2000 0 to 60s , timer , dyno drive , motor heating rod , pvc unarmoured flexible cable copper conductor , pvc unarmoured flexible cable copper conducto , pvc unarmoured flexible cable copper , pvc unarmoured flexible cable , condenser 2.5 mfd , condenser 3.15 mfd , condenser 4 mfd , condenser 6 mfd , condenser 10 mfd , condenser 33 mfd , condenser 50 mfd , condenser 60 mfd , condenser 72 mfd , condenser , power capacitor , soldering wire , soldering flux , soldering iron , air blower , hot air blow double speed blower with heater 1-phase 240v 50hz , copper bus bar , shakle insulator , bus bar insulator length , current transformer , ampere meter 96x96mm 0 to100a , ampere meter 96x96mm

CTN :45587225

08 Jul, 2026 9.62 Lacs

Udhamsign Nagar - Uttarakhand

Tender For supply of supply, fabrication and construction of copper plate earthing details of electrodes and earth pit at akashvani jaspur, uttarakhand , providing of 50mm x 3mm copper strip and interconnecting earth electrodes with fabrication and fixing of 50mm x 3mm copper strip at akashvani jaspur, uttarakhand , providing and fixing of nomenclature sign marker for earth pits at akashvani jaspur, uttarakhand , providing of 25 mm x 3 mm copper strip for extension of earthing system up to the transmitter hall, ups and lt panel at akashvani jaspur, uttarakhand , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at air jaspur , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at akashvani jaspur , making of trenches of size 700mm x 750mm for 185 sq mm 3.5 core starting from state electricity transformer to lt panel by digging the soil which includes cement concrete interlocking tiles , providing and grouting of 2 nos. of 4inch dia g.i. pipes of different length on the cement concrete flooring, road, and cement concrete interlocking tiles and along the vertical walls. , unwinding roll of 185 sq. mm 3.5core al. cable from their cable drum and laying the cable through the trenches and through the g.i. pipes as laid down at akashvani jaspur , reconstructing the cement concrete interlocking tiles floor and repairing the area with cement concrete interlocking tiles and finishing the surface at akashvani jaspur , providing and fixing of lt cable route marker made up of 2.5inch dia signage with 10mm x 2ft long ms rod from transformer to lt panel at akashvani jaspur , providing and fabricating of overhead shed for the installed 62.5kva dg set as per drawing at akashvani jaspur supply, fabrication and construction of copper plate earthing details of electrodes & earth pit as per given below: digging of pit of size: 1 mtr x 1 mtr x 3.5 mtr(d) providing of copper plate size 600 x 600 x 3mm. providing of copper strip of 50x3mm shall be extended from bottom of the earth pit to the surface of the earth pit, after joining the copper strip by copper rivets and proper brazing of strip to the copper plate. providing and fixing the 10ft. long 38 mm dia class c g.i pipe of reputed make such as surya, jindal or similar and fixing with the copper plate in the center with g.i/ ss nut bolts class c. one g.i. reducer at the top of the pipe is to be provided for fixing steel mesh for watering as shown in the drawing. placing the copper plate with pipe and strip into the pit. providing & filling of 2 nos. of bags of bentonite each of 50 kg. (for each earth pit.) providing & filling of 80kg charcoal, and 80kg raw salt in alternate 3 to 4 layers in each earth pit. the fresh soil about 2.0 cubic metre in earth pit size in layers is to be arrange to fill the pit for proper result. proper watering of the filled pit for initial charging of pits. providing of heavy duty c.i. cover with lifting hooks. construction of cc chamber in ratio 1:4:8 & fixing of heavy duty c.i. cover., providing of 50mm x 3mm copper strip and interconnecting earth electrodes with fabrication & fixing of 50mm x 3mm copper strip as per given below: i. 2 grid out of 6 pits for transmitter. ii. 1 grid out of 3 pits for audio. iii. power supply-3 pits separate (lt electrical panel, ups & isolation transformer, avr) iv. rf //bid details 2 / 25

CTN :45555744

13 Jul, 2026 NA

West Singhbhum - Jharkhand

Tender For supply lt distribution panel consisting of fp 250a 36ka mccb as incoming and fp 100a 36ka mccb - 03 nos., fp 63a36ka mccb - 02 nos. as outgoing with voltmeter, ammeter, led indicator lamp, cu. bus bar, neutral link, earthbar, spreader link, lock and key feature arrangement etc.. with suitable sheetsteel enclosure. lt panel shall beas per cege/grcs specification ser/elec/gs/description/ltpanel/1/rev-0/mar 2024. [ warranty period: 30 months after the date of delivery ] ]

Bus Bar Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

Corporations And Associations And Others

corporations/Associations/Others

State Government

Central Government/Public Sector