Get complete information related to latest Busbar Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Busbar Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Busbar Repair Tenders.
Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]
Tender For procurement of rc spare parts for the lean gas compressor - phasearn/inu busbar copper flex bar, phase module fast connectors 2000, current transducer lt2005-s/sp19, spacer ring 10 (for m10
Tender For supply of copper busbar part no bbr400 , potential transformer 6.6kv by 500va part no htptl2 , potential transformer 11kv by 110v 3ph , isolator 300 amps on off , switch ictp 415v 100a 3p , siren flp ug kem u15 , 15v is signalling bell part no sb1 , elr w cbct 100 to 200vac 50 to 750ma
Tender For (supply)-supply of under frame swivelling type 200/180 watts led rolling in examination light arrangement duly housed in ms box with 20a, 230v dp mcb safety protection with minimum wall thickness of 2mm of suitable size with powder coated and twin glass fixing mounted with along with residual current protection operated on 190v-240v ac supply with load current 16a conforming to is 12640 (part 2):2008 iec61009-1:1996 or latest or latest with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 16a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5 and with 180/200 watts led flood light fitting with clamp set of 50mm pipe for the length of 750mm with 180 degree rotating arrangement with full set led flood light [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of electrical panel enclosure - 2200 (h) x 1200 (w) x 800(d) with following description: 1. size: 2200 height x 1200 width x 800mm depth of double door. 2. material: crca (cold rolled close annealed) sheet steel. 3. structure: 2mm thickness (14 swg) for panel structure and 1.6mm (16 swg) for doors and covers. 4. base frame: a 200mm high channel base for mounting and cable entry. 5. paint finish: epoxy powder-coated with 7- or 10-tank pretreatment for corrosion resistance, typically ral 7032 (siemens grey) orral 7035 (light grey). 6. doors: front and rear doors with stiffeners, neoprene/pu foam gaskets (for sealing), and lift-off hinges with key-lockable handles. 7. ventilation: louvered ventilation slots with air filters. 8. protection: ip65/ip66 (dust-tight and water-resistant for harsh environments). 9. mounting plates: zinc-plated or painted mounting plates for mounting plc racks, smps, and relays. 10. gland plate: 3mm thick detachable gland plates for bottom or top cable entry. 11. earthing: copper earthing busbar (25x5mm) at the bottom, with copper braided straps to connect all doors and side panels. 12. lighting/power: internal led lighting with limit switch and 230vac 5 pin socket. 13. document holder: a pocket attached to the inside door. [ warranty period: 12 months after the date of delivery ] ]
Tender For supply of 63a wall mounted busbar chamber made of etp grade copper 4 way. make-havells/c&s/anchor. [ warranty period: 30 months after the date of delivery ] ]