Latest busbar Tenders | Government busbar Tenders

Central Government And Public Sector

CTN :39112820

07 May, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

Central Government/Public Sector

CTN :40140664

06 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of e4253001 for numerical relays for ntpc lara project - e4253001 numerical relays crp 01-sg4935107006- numerical main-1 generator protection relay as per it-01 of ann-1 , 02-sg4935107014-accessories for sef _and_ ref as per it-02 of ann-1 , 03-sg4935107022- numerical main-2 generator protection relay as per it-03 of ann-1 , 04-sg4935107030-numerical transformer differential _3 wdg_ protection relay as per it-04 of ann-1 , 05-sg4935107049-numerical overall differential protection relay as per it-05 of ann-1 , 06-sg4935107057-numerical overcurrent _and_ ref protection relay as per it-06 of ann-1 , 07- sg4935107065-metrosil as per it-07 of ann-1 , 08- sg4935107073-stabilising resistor _0-5k_ as per it-08 of ann-1 , 09-sg4935107081-ethernet switch as per it-09 of ann-1 , 10-sg4935117001-numerical main-1 line distance protection relay _process bus_ as per it-10 of ann-1 , 11-sg4935117010-numerical main-2 line distance protection relay _process bus_ as per it-11 of ann-1 , 12-sg4935117028-numerical main-1 line differential protection relay _process bus_ as per it-12 of ann-1 , 13-sg4935117044-numerical main-2 line differential protection relay _process bus_ as per it-13 of ann-1 , 14-sg4935117117-numerical transformer differential _3 wdg_ protection relay _process bus_ as per it-14 of ann-1 , 15- sg4935117125-numerical overcurrent _and_ ref protection relay _process bus_ as per it-15 of ann-1 , 16-sg4935117133-numerical islanding relay _process bus_ as per it-16 of ann-1 , 17- sg4935117141-numerical lbb protection relay _process bus_ as per it-17 of ann-1 , 18- sg4935117150-numerical teed protection relay _process bus_ as per it-18 of ann-1 , 19- sg4935117168-metrosil as per it-19 of ann-1. , 20- sg4935117176-stabilising resistor _0-5k_ as per it-20 of ann-1 , 21-sg4935117184-numerical busbar protection process bus _new switchyard in present scope_ as per it-21 of ann-1 uom-set , 22- sg4935117192-bay control unit _process bus_ as per it-22 of ann-1 , 23-sg4935117206-panel along with merging unit _and_ switchgear control unit _process bus_ as per it-23 of ann-1 uom-set , 24- sg4935117214-ethernet switch _process bus_ as per it-24 of ann-1 , 25-sg4935117222- gateway_slash_networking panel as per it-25 of ann1 , 26-sg4935117230-ows _ccr_ as per it-26 of ann-1 uom-set , 27-sg4935117397-ews _cer_plus_crp_plus_ccr_ as per it-27 of ann-1 uom-set , 28-sg4935117249-laptop _scr_plus_ex_ as per it-28 of ann-1 , 29-sg4935117400-a4 printer _cer_plus_crp_plus_ccr_ as per it-29 of ann-1 , 30- sg4935117257-ows _scr_plus_ex_ as per it-30 of ann-1 uom-set , 31-sg4935117265-ews _scr_plus_ex_ as per it31 of ann-1 uom-set , 32-sg4935117273-a3 printer _scr_plus_ex_ as per it-32 of ann-1 , 33-sg4935117281- a4 printer _scr_plus_ex_ as per it-33 of ann-1 , 34- sg4935117370-dot matrix printer _scr_plus_ex_ as per it-34 of ann-1 , 35-sg4935117290-laptop _scr_plus_ex_ as per it-35 of ann-1 , 36-sg4935117303- 80 inch rear projection lvs as per it-36 of ann-1 uomset , 37-sg4935117311-inverter as per it-37 of ann-1 uom-set , 38-sg4935117320-network firewall as per it-38 of ann-1 uom-set , 39-sg4935114002-fo cable _in mtrs_ as per it-39 of ann-1 uom-meters , 40- sg4935117338-control room furniture as per it-40 of ann-1 uom-set , 41-sg4935117346-sas spares as per it-41 of ann-1 uom-set , 42-sg4935117354-training as per it-42 of ann-1 uom-set , 43-sg4935117389-amc as per it-43 of ann-1 uom-set

Central Government/Public Sector

CTN :40155943

19 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of 25 kv earthing discharge rod made of resin bonded fibre as per rdso spec. no. eti/ohe/51 (9/87) rev-1 with a&c slip no. 1 (10/92) or latest, complete with cable, earthing rail clamps 2 nos, suitable for 36mm to 50mm outer diameter circular busbar and cable (7.5+1.5m) with rugged canvas bag for each discharge rod. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40119127

26 Apr, 2025 NA

Dehradune - Uttarakhand

Tender For electric cabling service - 3 phase heavy duty electric wiring xlpe insulated working voltage form 415 v to 11 kv as per is 1554 along with associated items and civil work as per schedule of work attached; copper and aluminium coth conductor material as per schedule of work-1 supply, laying and testing cable xlpe insulated ,screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3 1/2 core. rm 280 2 excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 sqm on plan and getting out in soft /loose soil complete all as specified and as directed cum 60.75 3 returning filling including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed. cum 60.22 4 removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. cum 0.53 5 supply and laying ldpe pipes 50 mm dia with all fitting ,laid in ground for crossing the cables across the road by cutting existing road , under floor ,wall by cutting existing floor and making good the road /floor and wall surface after laying of pipe . rm 270 6 cement concrete 1:3:6 type c-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete for making foundation for mounting flood light /bollard light fitting/finishing of roads/floors etc . cum 4.05 7 m &l for cutting of road /floor surface 30cm girth, up 45 cm width for croosing the pipe line /laying of cable acroos the road all as specified and directed. rm 30 8 s & f distribution boards epoxy powder coated tp & n (vtpn mccb db) 8 way ,415 volts ,fabricated from minimum 1.6 mm thick crca sheet and fixed/ flush to wall and suitable for universal mounting with 250 amps fully insulated copper bus bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for ip-43 db,s protection, suitable for fixing fp mccb 100/125 amps as incomer complete all as specified and directed. note: suitable mccb and outgoing mcbs will be measured separately under relevant items of this schedule each 1 9 s & f mccb ,4 pole 100 a , 415 volts with rupturing capacity 16 ka with thermal-magnetic release and adjustable overload setting of following capacity complete all as directed. each 1 10 s & f bus bar chamber with 4 nos copper busbar 150 amps including mccb 100a 16ka 415 volts each 1 11 s & f sub main wiring with 4x16 sqmm +1 x 10 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 50 12 s & f sub main wiring with 2x4 sqmm +1 x 4 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 200 13 s & f modular rectangular block for mounting,modular switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175mm x 175 mm and 50 mm deep each 25 14 supply and fix modular switch 1 way 16a, 1 module with indicator lamp each 25 15 supply and fix modular socket 6a/16a, 2/3 pin combined 2 module each 25 16 material and labour for earthing with galvanised steel earth plate electrode 60cmx60cmx 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 32 x 6 gi strip by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to

State Government

CTN :40071789

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electrical accessories and allieds works at shaspur pwss, block-rampurhat-ii under bolpur mechanical division - supply, delivery at site and storage of wall mounted made of sheet steel fabricated 2 mm for load bearing & 1.6mm for non load bearing, indoor type, dust & vermin proof, lp-54 degree of protection, powder coated painted with rubber gaskets cover, front lockable hinged door with all switchgear and other items duly wired up and tested as per specification: incomer: (a) 100 amps, tpn mccb with adjustable ol, 36 ka, e/f, auto phase corrector & necessary accessories with suitable spd (i.e., ammeter, voltmeter, cts & switches), outgoing:- (b) 7.5 hp to 12.5 hp, tp star-delta starter with other accessories - 1 nos., (suitable size capacitor bank to improve pf from o.85 to 0.98) (c) yard lighting feeder with necessary accessories & time switch(digital) - 1 no. (d) 3phase actuator valve starter with other accessories -1 nos., (e) 2 hp ,3 ph,415v,clorinator feeder with necessary accessories & level controller-1 no., (f) 32a mccb fdr for iep/misc purpose-1no., (g) 32a mccb for in house light-1no.,(e) plc feeder with necessary accessories-1no.( all spare & components as per vendor list of phed), supply and delivery at site of 15 kva, 3phase, oil cooled type servo motor operated copper wound line voltage corrector conforming to is-9815 (pt.-1)- 1994 suitable for un-balanced input voltage with following specification including first filling oil as per is-335 where applicable.a) input voltage:- 3 phase, main supply may or may not be balanced with respect to phase to phase- 200v-500v phase to neutral-115v-290v.b) output voltage:-3 phase balanced output voltage. phase to phase- 400vor 415v 1%, phase to neutral- 230v-240v 1% (provision should be made to adjust the variation of output voltage per phase by a variable pot oil within 5% of output).c) line regulation:- out put voltage should remain well with 1% of set voltage (from minimum to maximum i.e. either 400v. or 415v. supply variation).d) load regulation : output voltage should remain neutral well within 1% of set voltage be ( from no load to full load ) i.e. either 400v. or 415v.e) correction speed:- better than 35 volt / second.f) efficiency:- better than 95% on full load.g) cut off limit (minimum &maximum ) by limit switch with audio & visual.h) metering indication:- by selector switch provision should be made available to measure input mains supply and output voltage other stabilizer for load current measurement an ammeter with selector switch should be available.i) lamp indication :- for input & output should be provided. ( 3 lamps per side ).j) mcb protection: for input side.k) load protection : hrc fuse on each output phase should be availablel) output over shoot:- beyond 210v to . 255v /phase in case of manual mode & voltage protection :auto mode operation.m) visual indication for under voltage & over voltage of output.n) manual mode:- up & down correction with o / p voltage over shoot protection. beyond 210 v-255 v. per phase.o) nature of cooling:- oil cooled system.p) electric current over load protection .q) circuit for delay output .r) input high voltage cut-off above 500 v.s) mode of operation:- auto/manual with a provision to restore the normal working of the unit standby operation should be available in case of any electronic failure in auto mode., installation of mcc panel along with main switch, changeover, busbar chamber, cut out etc. all electrical equipment within the pump house, drawing of cable properly on suitable size gi cable tray on wall / as per direction of eic as per layout & ie rules and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fixing of materials for taking power within the pump house from wbsedcl end as per direction of eic. [for ph no - i, ii & iii], installation of above supplied stab

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

Central Government And Public Sector

CTN :39028034

02 May, 2025 28.61 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : supply of droppers and busbar sets of bhel make ht switchgear - bus connection set,bhel,cb,11kv , bus bar connection,35216602010,bhel , bus bar connection,35216601865,bhel , bus bar conn set ryb,35216602601,bhel , bus bar,12x200cu,bhel,vac cb,11kv , bus bar,25216901502-v01,12x200,al,bhel , busbar,35216901507-v00,12x100,al,bhel , dropper b or w bb,bhel,vcb , dropper b or w bb,35216301651- v02,bhel,vcb , dropper,bb and sf,bhel,cb,11kv

corporations/Associations/Others

CTN :39954254

30 Apr, 2025 NA

Ranchi - Jharkhand

Tender For corrigendum : repairing of power cable in dls busbar and tightening of busbar insulations of hfs shop in ij bay of 03 shop ffp

Central Government/Public Sector

CTN :40084463

05 May, 2025 NA

Mangalore - Karnataka

Tender For rc for 3 years for supply of honeywell pccs spares at mrpl aromatic complex - hpm_red pwr supply(20a) w/m_51404174-275, hpm_digital output fta_51204156-175, hpm_di fta(32),24 vdc _51303928-150, hpm_di processor (32) _51304485-150, pm i/o file 15 slots p/n:51404127-250, hpm_do processor 24vdc(32)_80363975-150, c300_carrier channel_cc-mcar01, c300_analog input iop _cc-paih02, c300_analog output with hart_cc-paoh01, c300_control firewall _cc-pcf901, c300_memory backup assembly_cc-scmb02, c300_non-red-iota_cc-taix01, c300_analog input iota _cc-taix11, c300_analog output iota_cc-taox11, c300_iota for controller_cc-tcnt01, c300_iota for control firewall_cc-tcf901, fim8 module iota, p/n:cc-tfb811, common_fan assembly _smod36110001-ce, i/o link cable - 6 drop,p/n:51195479-500, series-c to pmio adptr cabl_51202341-112, c300_io link cables_51202329-312, c300_io link cables_51202329-302, 15m fta cable for pmio_mu-kfta, fta i/o cable_51201420-015, c300_dcom int commn cable_fs-cci-uni-02, sm_battery&keyswitch module_fc-bkm-0001, sm_chas for red io mod_fc-iochas-0001r, sm_power_board 8ch.24dc_2a_fc-pdb-0824p, sm_psu 24/5 vdc, 16amp_fc-psu-240516, delta power supply for fsc (m24-20he)fc-psu-uni2450u, sm_quad processor fc-qpp-002_fc-qpp-0002, sm_ai mod (24 vdc, 16 ch)_fc-sai-1620m, sm_di module (24 vdc, 16 ch)_fc-sdi-1624, sm_do module_fc-sdo-0824, sm_bus terminator red_fc-term-0002, sm_di fta_fc-tsdi-1624, sm_fs do fta_fc-tsdo-0824, sm_universal safety interfac_fx-usi-0002, sm_i/o bus ext_1x iochas_fs-iobus-cpiox1, power busbar. 200a, 150cm_fs-mb-001, sm_com interface fta_fc-dcom-232/485, sm_namur sensor conv module_fc-bn-1608, sm_range-setting modules_fc-bsdol-04uni, sm_di module 16 ch loop mon_fc-sdil-1608, sm_do module 24 dc loop mon_fc-sdol-0424, sm_di fta (24 vdc) _fc-tsdi-16uni, sm_do_fta_line_mon_cc _fc-tsdol-0424c, sm_gas / flame det fta _fc-tsgas-1624, i/o extender module, p/n:fc-io-0001, 25 mt fta cable for sm_fs-sicc-001-l25, 40 mt fta cable for sm_fs-sicc-001-l40, 50 mt fta cable for sm_fs-sicc-001-l50, sm_ai mod fs 0(4)-20 ma_fc-tsai-1620m, sm_safe do_ fta _fc-tsdo-04uni, sm_chassis for ctrl proc _fs-cpchas-0003, rs232-rs422/485 viceversa_sacc26064200-u, c300_power supply_cc-pwrr01, i/o link cable - 5 drop p/n:51195479-400, i/o link cable - 4 drop , p/n:51195479-300, c300_cbl pr- iota expander_51202329-802, c300_cbl pr- iota ch_51202329-812, c300_cable strap pair_51202335-300, c300_carrier cover, iota_cc-mcc003, cbl pm fta w/pls con 8m_hail021200005, cbl pm fta w/pls con 15m_hail021200008, cbl pm fta w/pls con 25m_hail021200011, power distri cabl cpchas 24v_fs-pdc-cp24, sm_power dist cable set _fs-pdc-cpset, power distribution cable fs-pdc-hse24, power distri cable iochas_fs-pdc-ioep1, power distri cable iochas_fs-pdc-ioep2, power distri cable iochas_fs-pdc-ioep3, sm_io-chs_pwr_dist_5vdc_fs-pdc-ior05, sm_pwr_dist_cbl_set_fs-pdc-ioset, intercable term.on.fta_fs-sicc-0001/l10, intercable term.on.fta_fs-sicc-0001/l25, intercable term.on.fta_fs-sicc-0001/l40, intercable term.on.fta_fs-sicc-0001/l15, intercable term.on.fta_fs-sicc-0001/l6, fo converter san tele_sc09fens020sca230i, fo converter san tele_sc09fsnssm230i, san, sm_rittal thermostat_srtl-sk3110.000, optiplex xe3 mgmt station_51156745-100, moxa safenet switch_eds-308, ucom switch for sm_sdw-550 ec, sm_psu_ps/1ac/24dc/5_spsu-sfb-2866750, sm_psu_ps/1ac/24dc/10_spsu-sfb-2866763, sm_psu_ps/1ac/24dc/20_spsu-sfb-2866776, sm_psu_ps/1ac/24dc/40_spsu-sfb-2866789, sm_diode_cp dm 10_sdio-8710620000, quint-, sm_diode_cp dm 20_sdio-8768650000, quint-, sm_diode_cp m dm40_sdio-1222220000, hail_dcs_epks nw_terminal server 16 portmoxa make_part number_nport-5650-16, vm management switch 24 port_at-9000/28, epks_fte switch r5xx _c9200l-24t-4g.e, c9200l-48t-4g-e, bkm module battery, epks_flat monitor_24'' dell monitor, epks_modbus/tcp firewall_ne-fwmb01, epks_router _ws-c-3850-24t-l, epks_firewall _asa5516-fpwr-k9, epks_100 scada point adder_ep-dsc100, epks_100 scada point red adder_ep-rs

Central Government/Public Sector

CTN :40078512

30 Apr, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For supply of limit switch 3no plus 3nc, 10a, part no. 0701040035 , electronic timer off delay,0..60s,2no plus 2nc,110vac, part no. 0201130032 , vacuum contactor savac4, rating 400a coil 110v ac, part no. 0201200004 , sensitive earth leakage relay with cbct, 2 5a 110v ac, part no. gbf2050 , aux control relay kai, 3co, part no. 0201010062 , ht hrc fuse 150a 6.6kv, part no. 0201160286 , p t fuse, 1a 6.6kv, part no. 0201160342 , motor protection relay 110vac, part no. 0201070025 , push button element,1no plus 1nc,10a, part no. 0201060021 , on off isolator rating 630a 6.6kv 3p, part no. 0201080013 , voltmeter 0 to 8kv, ptr 6.6kv 110v, part no. 0201100148 , lamp with holder 3w 220vac, part no. 0601020024 , 3ph potential transformer 6.6kv 220v 110v 500va, part no. 0201040018 , dc pack for closing coil, 220v dc, part no. 0701040041 , busbar support, rating 6.6kv, part no. 601030001

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

Busbar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors