Get complete information related to latest Bushes Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bushes Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bushes Tenders.
Tender For corrigendum : provision of bpac and double distant signal in badnera chandur bazaar section on bhusawal division - schedule (a) -provision of bpac & double distant signal in bd-cndb section on bhusawal division., supply of relay rack assembly complete with scaffolding, fixtures and accessories including ms bars for fixing of relay plug board, string rods, fuse strips with bracket, 11 way bus bars with cover and mounting brackets, runway for cable/wires, frame, base assembly etc. siemens type & as per extant practice on c. rly. typical part list and rack arrangement as per sketch no sk-727 and rack plan as approved by engineer incharge. (inspection by consignee), supply of tag blocks 200 / 160/120 way with polycarbonate cover as per irs s 77-2006 (rev 1 ) rdso drg. no sa 24751, sa 24752 & sa 24753 requirement of each type shall be specified by engineer incharge .(inspection by rdso), supply of main cable termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal blocks, ladder, string rods, frame, base assembly, insulators, j bolt, nut/bolts & fasteners, backelite sheet, etc. siemens type and as per extant practice on central railway. typical part list and rack arrangement shall be as per sketch no. sk-727 with latest alterations. (inspection by consignee), supply of pvc indoor cable 1x60x0.6mm dia colour coding of insulation of inner core shall be in six colour viz blue , red , grey ,green, brown and black conforming to irs 76/89(amdt 3) or latest. (inspection by rites), supply of pvc indoor cable 1x 40x0.6mm dia. colour coding of insulation of inner core shall be in eight colour viz blue, red, grey, green, brown, black, yellow & white. conforming to irs 76/89 (amdt 3) or latest. (inspection by rites), supply of pvc indoor cable 1 x 24 x 1 mm dia. colour coding of insulation of inner conductor shall be in eight colour viz blue,red,grey,green,brown,black, yellow & white.conforming to irs 76/89 (amdt 3) or latest. (inspection by rites), supply of indoor jumper wire of various colour as per railways standard practice of type atc 1 x 0.6 mm dia. conforming to irs 76/89 (amdt 3) or latest.(inspection by consignee), supply of indoor jumper wire atc 1 x 1 mm dia. conforming to irs 76/89 (amdt 3) or latest. (inspection by consignee), supply of pvc flexible copper cable, single core, multi strand 1x2.5 sq mm(50 conductor each dia 0.25 + /- 0.01) as per specn is 694/2010 with latest amendment. if any with insulation thickness of 0.70 mm nominal conductor resistance 7.98 ohms /km and test parameters are as per irs (s)76/89 (amdt .3). (inspection by consignee), supply of pvc flexible copper cable, single core, multi strand 1x10 sq mm(80 conductor each dia 0.40 + /- 0.01) as per specn is 694/2010 with latest amendment. if any with insulation thickness of 1.00 mm nominal conductor resistance 1.91 ohms /km and test parameters are as per irs (s)76/89 (amdt .3). (inspection by rites), supply of wire 16/0.2(blue,red,gray,yellow,brown,black,white as per site engineer instruction)finolex/polycab/delton make.irs:s-76/89(amd.3),bs:4808 part-2.wire to be procured from rdso approved vendor (inspection by consignee), supply of transformer 230v/110v-130v single phase 1 kva as per spec. irs s-72/88 (amd.2) with latest amendments. (inspection by rdso), supply of transformers rectifier unit 110v ac/24v dc 500ma as per specn.no.cr/s&t/91-12. (inspection by rdso), supply of battery charger self regulating floor mounting type with 230 v ac single phase input and output 24v dc, 30a as per spec. irs.s.86/2000 (amd.1) with latest amendments for axle counter applications (amd.4). (inspection by rdso), supply of automatic changeover for individual supply automatic changeover unit of signal/track/dc circuit supply of 32a, ac/dc consisting of 3tc 44 contactors, led lamp,push button, terminals,vsr,polarity switches. as per rly.drg-sk-841/1-5 for ips supply to mannual discrete e
Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi
Tender For corrigendum : - tender for cutting and clearing of vegetation including trees and and bushes in and around the tower footings, including stacking of the disposed material in a designated location, for the 66 kv transmission lines alongwith carrying out lopping works and providing of vehicle for hpsebl staff for carrying out supervision and other maintenance of ehv lines.
Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach
Tender For providing sewerage scheme to heritage village garli & pragpur in tehsil pragpur distt. kangra hp (sh: clearing grass, bushes and tree around the division office path and divisional store).
Tender For annual rate contract for cleaning grass/bushes, clearing of fallen trees and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared
Tender For cleaning of unwanted growth i.e., grass, wild bushes and shrubs etc. by mechanical means in vacant land made available in sector-23,31,32 and 38 rohini. mechanical means in vacant
Tender For work of cutting/clearing of jungle / wild bushes and grass of outside are/ inspection gallery of 400/220kv switch yard at 400 kv sub station, rishikesh
Tender For cutting of wild bushes and grass nearby switchyard and boundary of substation campus and cleaning of cable trenches at 132kv s/s, almora and 132kv s/s, ranikhet under oandm division, ptcul, almora