Latest bushes Tenders | Government bushes Tenders

State Government

CTN :40585387

09 Jun, 2025 13.01 Lacs

Murtizapur - Maharashtra

Tender For providing skilled lagour during monsoon season for monitoring daily water levels spillway discharge alerting flood prone villages and operating gates and other related works for flood control cleaning bushes rubbish and sullage from syphone vrb and o

Central Government/Public Sector

CTN :40604268

18 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of slack adjuster assembly (upper) to rdso drg no. skvl 189, alt-1 & skvl 190, alt-1 wit h bushes alone to material mn steel to irs-r65/78. note: two nos of roll pins to ref. no. 9 of drg. no. skvl-189 to be fixed by drilling on the block at both sides of the adjusting bolt tail end to create efficient locking mechanism [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40396006

11 Jun, 2025 1.61 Lacs

Prayagraj - Uttar Pradesh

Tender For corrigendum : cleaning of long grass shrubs bushes herbs cactus and other wild plant by scraping of grass at 400 kv stb masauli prayagraj

Central Government/Public Sector

CTN :40584964

16 Jun, 2025 NA

Dhar - Madhya Pradesh

Tender For jcb along with operator, driver and fuel will be provided at the rental rate for drainage and cleaning of bushes, removal of water logging and other works as per requirement at rehabilitation sites under three camps.

Central Government/Public Sector

CTN :40591034

14 Jun, 2025 1.91 Lacs

Jhagrakhand - Chhattisgarh

Tender For cleaning of bushes and grass at different substation located at different place and disposal of the rubbish outside from the periphery area of rajnagar ocm, hasdeo area

Central Government / Public Sector

CTN :40589921

24 Jun, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of brake block hanger ( modified ) for bogie brake (with out bushes) conformi ng to rdso specn. no. c-9808 rev.- 4, corrigendum- 2, june,2016 and amendmnt no. 1,dec,2 016 to rdso drg no : cg - k9117, item - 1 alt : 3 [ warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :40599446

16 Jun, 2025 NA

Dhanbad - Jharkhand

Tender For clearance of o/h line through tree cutting near muraidih colliery office to muraidih colony and uprooting of grass and bushes behind muraidih kali mandir substation and cisf camp substation of muraidih colony for safety purpose under amp colliery.

Central Government / Public Sector

CTN :40598506

17 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of back hoe loader(jcb) to remove wild growth and thorny bushes etc in oft

CTN :40584741

18 Jun, 2025 NA

Dewas - Madhya Pradesh

Tender For tender for providing and fixing open gym upkaran at different garden in ward no. 03 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4inch b

CTN :40584774

18 Jun, 2025 NA

Dewas - Madhya Pradesh

Tender For supply of open jim item at vikas nagar gardan in w.no.20 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4inch b class gi pipe;prime stand

Bushes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors