Latest cable glands Tenders | Government cable glands Tenders

State Government

CTN :45412485

22 Jun, 2026 50.0 Thousand

Jagdalpur - Chhattisgarh

Tender For n.i.t. for supply of double compression type cable glands of various size under ee(mrt) dn, csptcl jagdalpur.

Central Government/Public Sector

CTN :45407088

12 Jun, 2026 NA

Ramgarh - Jharkhand

Tender For supply of lv bushing arrangement with connecting palm , neutral bushing arrangement with connecting palm , hv supporting insulator , hv cable glands , hv copper bus bar , neutral bushing ct

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

CTN :45370512

19 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 012193120403 adu mounting kit , z18 r90 kit-012 19312 0407 antenna mounting kit , z6 r90 kit- 012193120402 mdu mounting kit , z6 r90 pz185- 2s.000tu loading control unit pz 185-2s , z6 r90 gost-1491-80-04 screw m4-6gx12.58-016 , z6 r90 adsh-485-000tu wire bundle no 53 , z6 r90 5310720232958 washer, spring tension , z6 r90 5995- 020624 wiring harness - a l-3500 mm , z6 r90 5950- 007086 electromagnet emt 10 , z6 r90 5310720168491 washer, keyway , z6 r90 172-26-019 gear , lv3 r90 5310720221330 washer 12t , lv3 r90 sb 3336-00-11 mounting of turbo charger , n1 r90 5315720482363 pin, hollow drg no 2a46m-01-7 , z6 r90 9s-831-470 wing nut fly nut , z6 r90 9s-831-018 cover , n1 r90 n1 5360-041517 n1 2 spring helical compression , n1 r90 5340720326373 rib 2a46m-106-30 , z6 r90 bl-9-363- 593-03 ring , z6 r90 5340720241425 clamp, loop , z6 r90 175-74-003-sb mounting of elect com of reduction gear , z6 r90 f5-000tu filter f 5 , z6 r90 edm14-000tu electric motor edm-14 , z6 r90 5340720241423 clamp, loop , n1 r90 5999-049606 upper contact breech mech , z6 r90 bs6-644-160 cable no 6 st , z6 r90 bs2-958-032 actuating cylinder , n1 r90 1015-012713 2a46m-1 jacket section , z6 r90 rsg-10m-016 terminal bolt fastener , n1 r90 gost-5918-73 arhoh nut m6-7h.5.019 , n1 r90 cotter pin 1.6x16.06 cotter pin 1.6x16.06 , n1 r90 1005- 560606 sleeve , n1 r90 1005-560626 extractor cam , n1 r90 1005-560636 band drg no 2a46m-106-8 guard assy , n1 r90 1005-560637 band 2a46m-106-10 , n1 r90 1010-013305 or 1010- catch , n1 r90 1015-003447 2a20-02 stop 2a20-02-76 , n1 r90 1015-012688 stop, breech block , n1 r90 6635720397677 weight 2a46m- 10-61 , n1 r90 1015-012701 handle 2a46m-02-87 , n1 r90 1015-012702 lever , n1 r90 1010-013306 or 5340- catch , n1 r90 1090-000200 rack , n1 r90 1095720301322 flange, gun drg no 2a46m-01-40 barrel , n1 r90 1015-012734 sleeve , n1 r90 5315- 050431 2a46m-0 lock pin pin straight head , n1 r90 5305-101408 lock screw , n1 r90 1015-012761 recoil brake recoil brake upper lower , n1 r90 3040-023114 crank shaft , n1 r90 5315-050138 2a46m-0 key, machine , n1 r90 5306-060685 bolt 172-18-083sb , n1 r90 5306-059518 2a46m-0 head , n1 r90 5305-095027 stop 2a46m- 02- 94 , n1 r90 5305-095025 screw , n1 r90 2a26-sb 10-40 sb yoke arc assy , n1 r90 3020- 015560 or 3040- link , z1 r90 misc-172-71-002-18sb supply cable , n1 r90 gost 9650-80 3 pin 6.20 f9x55.38xc.2.35.5.45.5 , n1 r90 gost 792-67 arhoh 4 wire ko-1,4 l 2600 mm , n1 r90 bolt m12-8gx35-88-38 bolt m12-8gx35-88-38xc-016 , n1 r90 gost 7796-70 r0h 45 bolt 3m8-8gx20.66.06 , n1 r90 188-27-006sbsb mounting of hatch door drive , n1 r90 2540-009427 base , n1 r90 3010-004162 reduction gear unit , n1 r90 1005-560735 striker , n1 r90 4820-057516 2a46m-0 plug , n1 r90 5365-182155 outer ring 2a46m-02-56 , n1 r90 5360-041518 2a46m02 spring helical compression , n1 r90 3020-001979 link tip-12-7-1820-1 gost 13568- 97 ce , n1 r90 5310-254078 gost 13 washer 14-01-10-06 spta , n1 r90 5365-182652 inner packing ring ring retaining , n1 r90 gost 14896-84 sealing ring 3.60x40.6 , n1 r90 5360-041474 nut , n1 r90 5360- 041473 spring helical expression a51230-70 , n1 r90 5360-041364 a51230- spring, helical compression , n1 //bid details 2 / 137 r90 5342-000044 rod , n1 r90 5340-180111 left flap , n1 r90 5340-179980 2a46mcb crank with roller breech mechanism , n1 r90 5340-179299 172-18- bracket , n1 r90 5340-178649 170.20. clamp, retaining , n1 r90 gost 6402-70 oh 11 washer 10 65g 029 , n1 r90 gost 17475-80 roh 3 screw bm6-6gx10.66.c.06 , n1 r90 5305-100561 screw b screw bm14-8gx30-66-c06 guard assy , n1 r90 gost 1491-80 or gost screw b.m6-6gx16.66.c.019 , v5 rus-188.94.017 sb-1 cradle assy , c2 r90 188-94-018cb-1cb cradle assy , n1 r90 gost-7795-70 m8x1-6 bolt m8x1-6gx35-46-016 , z7 rus- 187.21.031sb lever assembly , c2 r90 rus- 188.94.029sb-1sb bracket assy , n1 r90 rus t90 gost 792-67 wire ko-2 , c2 r90 188-94-020cb cb rod assy , c2 r90 188-94-030 cb-1cb belt collector bag assy , c2 r90 188-94-073 pin , c2

CTN :45370702

19 Jun, 2026 NA

Multi City - Multi State

Tender For supply of design and supply of 11kv,3 phase,50 hz,630a bus bar 4panel,250 mva, indoor type ht switchgear consisting of vacuum circuit breakers,bus bars,pt,ct,mfms,protective relays,cable glands,trickle charger , insurance , transportation and unloading at site of the switchgear , installation, including civil foundation, consumable hardware and other accessories , testing and commissioning of the above ht switchgear , complete installation material for the above switchgear , charges for getting cea and state electricity board clearance for complete switchgear installation , special tools if any required for field maintenance and repair of vcbs list of tools to be enclosed , book of instruction for installation with finalized drawing

Central Government/Public Sector

CTN :45375193

20 Jun, 2026 NA

Khadki - Maharashtra

Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo

Central Government/Public Sector

CTN :45382837

22 Jun, 2026 NA

Kamrup - Assam

Tender For repair/maint of external electric supply system, distribution lt panels with connected items and allied services at other than basistha area under ge guwahati. - excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable, pole or stay and getting out in soft soil strata complete all as specified and as directed., returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as specified and as directed., removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed., supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (note : punned thickness shall be measured)., m&l for bricks common burnt clay, building brick, sub class b designation 75 old size bricks laid in trenches flat over sand cushioning for cable protection complete all as specified and as directed., m&l for supply and fixing / laying in replacement, connect, test and commissioning of lt under ground cable xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of ms saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.note : manufacturers test certificate shall be submitted alongwith rar/fb to engr-in-charge., (a) 95 sqmm x 3.5 core, (b) 70 sqmm x 3.5 core, (c) 50 sqmm x 3.5 core, (d) 25 sqmm x 3.5 core, supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 630 amps, 50ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 400 amps, 36 ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 250amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 160amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 125 amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 100amps, 26ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 63amps, 16 ka breaking capacity with

CTN :45367104

19 Jun, 2026 NA

Bardhaman - West Bengal

Tender For supply of r-6 scalloped edge rivet hinged steel fasteners belt joint kit for 1400mm width (item1) , hinge pin/spindle for r6-se- 60/1500 fastener for 1400mm belt (item2) , steel rivet, srf for 1400mm belt (item3) , steel rivet, srg for 1400mm belt (item4)

CTN :45359671

19 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of lock , lv2icvs 5310022119gost11371 washer flat 14.01.019 , lv2icvs 5304720327600 6745- lever manual control , lv2icvs 53257201130286745-1 sliderpull,inter-lockg slide fastener , lv2icvs 53257201130276745-1 sliderpull, inter lockg slide fastenr , lv2icvs 5330720114883730-17 gasket , lv2icvs 4730006938765-78-17 flange , lv2icvs 5310720216251765-33 nut, slotted hexagon , lv2icvs 5310720423802 700-3 nut, slotted, hexagon , lv2icvs 4710720314644 765-8 pipe assy, metal , lv2icvs 4710- 043104 6745-38 pipe , lv2icvs 4710720314498765-78 pipe assembly metal , lv2icvs 5306011731gost7796- bolt machinem8x30.88.38khs.019 , lv2icvs 5306-72-041- 8551gos bolt machine3m8x20.46.019 , lv2icvs 4710720312713765-08 pipe assembly , lv2icvs 4710720312710765-06 pipe , lv2icvs 5306011719gost7796- bolt machine3m8x16.46.019 , lv2icvs 5310-72-021-6500 70 washer, flat , lv2icvs 5330720115576 765-7 ring packing ring 765-78-1169 , lv2icvs 5365720272132765-33 washer flat , lv2icvs 5306720060024 6745- bolt, eye , lv2icvs 2520003186765-17-sb pedal control , lv2icvs 5340720324965675-55 bracket675-55-208 , lv2icvs 2530720200918675-33 wheel solid rubber tyre , lv2icvs 2540720307213765-18 frame seat back765-18- sb130 , lv2icvs 18-01-012-1 sleeve , lv2icvs 18-01-129 branch pipe , lv2icvs 2520003154765-15-sb final drive vehicular , lv2icvs 5510720139107 765-5 strap assy , lv2icvs 18-01-112-0 ring , lv2icvs 4710400001864 675- 0 pipe assy , lv2icvs 4710720312684675-05 pipe assy , lv2icvs 1005720300930675-57 race ring cupola turret , lv2icvs 675-64-495 gasket , lv2icvs 5340720327581 6745- lever, manual control , lv2icvs 4730720104494 6745- union pipe , lv2icvs 4730720104495 6745- union,pipe , lv2icvs 4710720260064765-05 tube assembly,metal , lv2icvs 4730720104393765-07 elbow pipe 765-07-sb108 , lv2icvs 4710003419765-05-sb tube , lv2icvs 4710720260069 765-0 tube assy, metal 765-05-sb395 , lv2icvs 4710720314393 6745- pipe metallic , lv2icvs 5330-021400765-22-3 gasket , lv2icvs 4710720314360765-78 pipe assembly metal , lv2icvs 5360720370452 spring,flat 730-14-267 , lv3icvs 552-04 r1 cylinderical pin 12x30 , lv2icvs 4710720312649675-78 pipe , lv2icvs 1025-000806675-55- s drive unit,turret rotation , lv2icvs 4710720312647675-78 pipe , lv2icvs 5306-012645 675- 78- bolt internally relieved body , lv2icvs 47107203144356745-7 pipe assy metal , lv2icvs 5305017789gost1477- screw m6x16.66.019 , lv2icvs 5305017786gost1478- screw m6x12.66.019 , lv2icvs 5306720053273765-12 eye bolt , lv2icvs 5305017794gost1476- screw m4.8n6nx12.66.016 , lv2icvs 5305017801gost1491- screw machine m4.8h6hx70.66.016 , lv2icvs 2510720352527675-65 turniable turret , lv2icvs 5340720240394765-30 bracket,angle , lv2icvs 5360720138063 700-3 spring, helical, compression , lv2icvs 2530720307086765-12 housing vehicular steering gear , lv2icvs 2530004050765-17-34 boot dust moisure seal , lv2icvs 2530004711cqaicv column, steering gear , lv2icvs 4730720102926674602 union , lv2icvs 5340720425190765-50 valve , lv2icvs gost-7475-80 screwm6-22.48-0101 , lv2icvs vchr-25x19 bushing , //bid details 2 / 135 lv2icvs vchr-29x22 bushing , lv2icvs gost 16996-71 belt tape lrt 25x3-1 gde 1 , lv2icvs gost-5915-70oh- 567. nut m4-6h.6.016 , lv2icvs kvd-niv8 gunners seat bracket , lv2icvs 765-97-13 bracket , lv2icvs 765-28- sb-104 crow bar bracket , lv2icvs ty 16-505-437-73 wire mgshv 0.35 , k9bmpnbc 765-71-874 gasket , k9 765-87sb-154 body head , k9bmpnbc 765-71-1463 gasket , k9bmpnbc 675-71-sb201 blower , k9bmpnbc 765-71-1482 gasket , k9bmpnbc 765-49-34 or 765-49- plate , k9bmpnbc 765-71-817 gasket , k9bmpnbc 765- 71-552 oh-4288 oil seal , k9bmpnbc drg no. 765-71- 362 spacer , k9bmpnbc 4710-042890 675-71- pipe or tube 675-71-sb213 , k9bmpnbc 675-50-123 plate , k9bmpnbc 675-50-122 plate , k9bmpnbc 675-50-120 plate , k9bmpnbc 675-50-119 plate , k9bmpnbc 675-58- 141 sheet , k9bmpnbc 4710042894 675-71-2 pipe 675-71- 260aimpd-0088b , lv3icvs 411-33 spring , lv2icvs 3110- 000496675-64-s belt feed booster , lv2icvs tu25-04- 117-77

Central Government And Public Sector

CTN :43989308

02 Jun, 2026 NA

Damanjodi - Odisha

Tender For bid to ras tender for supply of 1000073536 cable glands c c -as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification , as per tender specification

Cable Glands Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector