Latest cane carrier Tenders | Government cane carrier Tenders

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

Central Government/Public Sector

CTN :45050288

25 May, 2026 NA

Perambur - Tamil Nadu

Tender For supply of truck - 5 ton capacity as per following specification: pay load capacity - 5 ton minimum, type of load body - high side deck, type of fuel - diesel, vehicle emission compliance - bs vi, engine aspiration system - turbocharged intercooled, type of vehicle tyre - radial, vehicle transmission system - manual, type of steering - power operated, warranty time (in months) - 12 months [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :45019215

07 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap condemned hgv tata truck six wheeler (diesel) with battery and without stepney details of vhecle reg. no. up 85 ag 0228 number of cylinder six. at lot qty. 01 number only. total tare weight 6005 kg approx. ds -8 note no. 150114 date 23.12.2025. delivery on number basis and as is where is basis. cutting allow for easy loading purpose. lot is approachable by pakka road. bidders are required to visit the lot site for being aware about the site, condition/location and satisfy themselves before participating in the-auction.

Central Government/Public Sector

CTN :44661289

13 May, 2026 NA

Bengaluru - Karnataka

Tender For corrigendum : supply of solid tyres for 2018 model godrej forklift diesel truck-3 ton capacity, rear: size6.50x10 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45002240

09 May, 2026 NA

Angul - Odisha

Tender For supply of 5t forklift , 8t forklift , diesel forklift , diesel forklift truck , 3 ton diesel forklift truck

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

CTN :45002566

05 May, 2026 NA

Leh - Jammu And Kashmir

Tender For tender for supply of assy oil cane carrier frame , solenoid , ignition key , assy hose , chassis record beg , fly weight assy , gasket exhaust manifold , assy face side rh , speedometer

Central Government / Public Sector

CTN :45011669

29 Apr, 2026 NA

Secunderabad - Telangana

Tender For supply of radiator assembly suitable for 3-tonne capacity voltas dvx30-fc diesel forklift truck. [ warranty period: 30 months after the date of delivery ]

CTN :44986036

29 Apr, 2026 NA

Thanjavur - Tamil Nadu

Tender For purchase of cane carrier slat and wear pad for cane carrier slat

Central Government/Public Sector

CTN :45000791

04 May, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released condemned & u/s machine containing inbuild/attached ferrous and non ferrous, {(1) listor (jumbo diesel operated platform truck), make- josht engineering corporation limited thane, date of commissioning- 21.02.2000 (2) welding machine, date of commissioning- 1961, (3) digital ultrasonic flaw detectors, make- modsonic einstein, model no. e-914-1006, date of commissioning- 13.04.2007, (4) electric hot water generator-33kw, make- new therm boilers and heating system private limited, date of commissioning- 30.12.2006}, total qty- 4 number, location- diesel shed dadn. mode of delivery in number basis and on as is where is basis, custodian- sse-dsl-dadn, fdp- 50 days.

Cane Carrier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector