Latest cane carrier Tenders | Government cane carrier Tenders

Central Government/Public Sector

CTN :45422583

23 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of polycarbonate sheet for 8-w tower wagon lookout glass as per drg no emu/m2/tw/sk-02/2020 alt a [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45437097

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For three phase water pump suitable for spic & tower wagon. specification : head - 10 m, power - 0.75 kw / 1.02 hp, voltage - 440 volts, discharge - 3200 lph,, frequency - 50 hz, pipe size - 25 mm, current - 6.5 amp, power supply - ac, number of poles - 2 make : kirloskar / cummins / cromption only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45404913

16 Jun, 2026 NA

Erode - Tamil Nadu

Tender For corrigendum : supply of worn wheel profile gauge, made of hardened stainless steel with laser etched permanent marking of "wheel profile size" and "name of wheel profile gauge" on each gauge. wheel profile is made from wire cut edm. all gauges have hardened 45 hrc & 4 mm thick ss plate with calibration certificate from nabl accredited lab. for inspection of wheel profile of all type of wheel sets. in one set consist of following items:- 1. worn wheel profile (for bg wagon) gauge size-29 mm, qty-01 no. as per drg. no. 88021. 2. intermediate worn wheel profile gauge size-20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm & 28 mm qty 09 nos (one each size). as per drg. no. wd-89060/s-02, 3. 140t crane wheel profile gauge, size as per drawing no. csl-30404, qty-01 no. 4. tower car mark- ii wheel profile gauge qty-01 no. as per drg. no. jmp/cr-46/2008, 5. tower car mark- iii wheel profile gauge qty- 01 no. as per drg. no. ga5443/jmp. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45436018

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For electrical arrangements for : a)provision of stabling lines -2 nos(avadi side) at car shed/avadi b) construction of new trd depot building at tiruvallur(trl) and construction of tower wagon shed with pit line arrangements at avadi(avd) c) mas-ajj sec: elimination of mea deficiencies - pf shelters at 9 stns (nsg2-1, sg3- 8) & balance divyangjan facilities at 23 stns (nsg2-2, sg3-21)

Central Government/Public Sector

CTN :45437738

02 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of 12 inch wall fan rating 110v dc, operated sweep 300mm, cabin fan cf 300, speed 2000 rpm,blade plastic suitable for fitment in tower wagon. [ warranty period: 30 months after the date of delivery] ]

Central Government/Public Sector

CTN :45438272

15 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of hose plain to cil part no. 3635070 for tower wagon. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45421682

25 Jun, 2026 NA

Secunderabad - Telangana

Tender For avtec crt-5633 transmission o/h - overhauling of hydraulic transmissions make/model avtec - crt 5633 - along with dropbox, of ohe tower wagon, quantity 04 nos, pertaining to carriage workshop lallaguda, secunderabad, at firm premises.

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

CTN :45437162

11 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of set of radiator cores (a) radiator core assembly of roof top radiator unit for 8 wheeler detc/dhtc tower wagon (lh) as per drawing no. er/kpa/el ga.3tw.2507 [one assembly set consisting of (i)core-02 nos. (ii) hydraulic oil cooler- 01 no] (b) radiator core assembly of roof top radiator unit for 8 wheeler detc/dhtc tower wagon (rh) as per drawing no. er/kpa/el ga.3tw.2508 [one assembly set consisting of (i) core-02 nos. (ii) hydraulic oil cooler- 01 no] [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45404607

19 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of worn wheel profile gauge, made of hardened stainless steel with laser etched permanent marking of "wheel profile size" and "name of wheel profile gauge" on each gauge. wheel profile is made from wire cut edm. all gauges have hardened 45 hrc & 4 mm thick ss plate with calibration certificate from nabl/iso accredited lab. for inspection of wheel profile of all type of wheel sets. in one set consistof following items:- 1. worn wheel profile (for bg wagon) gauge, size 29 mm, qty 01 nos, as per drg. no. 88021. 2. intermediate worn wheel profile gauge, size 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm & 28 mm, qty 09 nos(one each size), as per drg. no. wd89060/s-02 3. 140t crane wheelprofile gauge, size as per drawing, qty 01 no, drg. no. csl-3040 4.tower car mark- ii wheel profile gauge, size as per drawing, qty 01 no, drg. no. jmp/cr-46/2008 5.tower car mark- iii wheel profile gauge, size as per drawing, qty 01 no, drg. no. ga5443/jmp [ warranty period: 30 months after the date of delivery ] ]

Cane Carrier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors