Latest cast iron swarf Tenders | Government cast iron swarf Tenders

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

Central Government/Public Sector

CTN :45637846

25 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - lhb brake disc ci 98080106 unserviceable lhb brake disc rotors ( attached nut and bolt with disc) of various sizes, ci brake block, made of cast iron, released from railway coaches. suitable for disposal as scrap material. loading to be done by purchaser. custodian: dms/scrap/pardi.

corporations/Associations/Others

CTN :45627655

30 Jun, 2026 NA

Trivandrum - Kerala

Tender For auction sale of unserviceable brake drums,unserviceable fly wheel, back plate, etc,unserviceable engine block, head,unserviceable aluminum cut pieces,unserviceable auto parts, ,unserviceable ms pipe & angles, seat frames etc,unserviceable slack adjuster & parts,unserviceable gear box shafts & gearwheels,broken spring leaves,unserviceable crank shaft, cam shaft and connecting rod,unserviceable aluminum piston,unserviceable water pumps, vein pump,ms turning chips,unserviceable starter motor field coil (copper),cast iron powder,unserviceable clutch disc,unserviceable aluminium gear box body , etc,unserviceable bearing and cone,unserviceable crown wheel &pinion,unserviceable air compressor assembly,unserviceable fip inline & rotary,unserviceable trolley jack and parts, lift piston and parts,unserviceable passenger seat assy ,unserviceable propellor shaft, shock absorber, rods etc,unserviceable radiator & inter cooler,unserviceable axle shaft, king pin, shackle pin,unserviceable spring bracket

CTN :45307467

20 Jun, 2026 45.05 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of constr of fighting pd of size 2.4m x 2.4m , soakl pit size 1.0m x 1.0m , steel loop hole size 610 mm x 330 mm , prefabricated steel door size 900mm x1800mm , door window loop hole 50 x 50 x 6mm 1200mm length , mild steel angle 35x35x5mm with , steel roofing trough size 2000x613x180mm , steel roofing trough size 1630x613x180mm , ply wood 10 mm thick , steel beam ismb 150 rsj 150 x 75mm 4.6mtr long , bitumen for filling of expansion joint of pcc , quick setting compound , integral water proofing compound , pcc soild block size 400mm x 200 mm x 200 , pbs roll size 20m x 0.90m , hdpe sand bag of size 75x40 cm , oil bound distemper , synthetic enamel pain og , hdpe sheet 150 micron thick , interlocking tiles. 60mm thick pcc , aggregate 20mm , aggregate 40mm , aggregate 63mm , manufactured sand , common burnt clay building bricks 230x115x75mm , polyurethane thinner , cement base paint , hydrophobic poreblocking ingredients , 18w led tube and fitting 4ft , 09 w led bulb , 9 w interter bulb , pvc ceiling rose 2 3 terminal , pvc casing capping square box 4 inch x 4 inch , 6a one way single module flush type modular switch , 1 module concealed metal flush box , white cover plate with frame 1 module , 2 module concealed metal flush box , white cover plate with frame 2 module , cable pvc insulated unsheathed single core 1.5 sqm , flexible wire pvc insulated twin core twisted , 25mm x 16mm pvc casing capping profile , 25mm pvc casing capping l bend elbow , pvc casing capping t 25mm , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , mcb double pole 230v ac 50 hz 6 amps 10 ka , self adhesive plasticized pvc insulation tape , 16a spn or dp main switches , mcb distribution boards in sheet metal , bricktrowe , drop forged high-grade carbon steel brick hamme , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot forged carbon steel powrah , high quality heavy duty flat painting brush , industrial rubber gloves , aluminium spirit levels 12inch , transparent flexible pvc water leveling tubes , cutting pliers , measuring tape 15 mtr , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium 40mm dia 6 mtr long , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

Central Government/Public Sector

CTN :45591672

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous cast steel consisting of buffer, buffer socket,buffer plunger, axle box housing,axle cover, coupler body & its loos-parts, knucle, pivot top & bottom, wind & narrow-jaw adopter, rear & inner cover, anti roll-bar with c.i.,screw coupling, pin, various types of shaft with or w/o bearing, bearing coller & cone, roller - cartridge bearing, supporting, device, spring- leaf, small lever & pull-rod, hanger bracket, control arm link, anchrage lock, roller/balls of bearing, motor suspension - unit tube, cuppler - body with balancing draft wear pad, gear off shorts cut pcs of wheel disc, tyre & axle, lower- spring beam arrangement seat,buffer complet, m.s. chain, break shoe head,machine hook,guide-rod , impeler track machine parts,ingot,iron block, & other varrious items fit for cast steel release from loco,carriage, sig, electric, trd, tmc, of sort & sizes with attachment of steel, c.i. & neg. non ferrous. if any. note :- 1. loading by purchaser. 2. cutting not allowed. 3. delivery not allowed against part payment. location :- lying in bin no. 06 near line no. -10

Central Government/Public Sector

CTN :45560685

09 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply of rack brake block to drg. no. 12052, nmr coaches ,part no.u and to specn. material cast iron to is:210/2009 (ra 2020) with amd. -1 of aug, 2025, grade fg 260. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45554894

03 Jul, 2026 NA

Koradi - Maharashtra

Tender For procurement of oiml standard calibration cast iron weights block m1-msci 2000kg with nabl calibration certificate or w and m legal metrology stamping certificate at chp 3x660mw, ktps, koradi.

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

CTN :45543129

24 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of mm , gate valve 20 mm dia , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr socket 20 mm dia , tank connector 32 mm , m seal 150 gm pkt , taflon tape roll isi marked , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , pvc waste pipe cp coupling 32 mm dia , pvc pipe 110 mm dia each 3 mtr length , pvc bend110 mm dia , p trap vitreous china , cp grating 100 mm dia , s trap vitreous china , distribution box 6 way double door spn comma 240 volts copper bus bar and neutral link earthing stud conforming to is 13032 and is 8623 double door type comprises with the mcb , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1 point 5 sqmm single core frls confirming to is 1554 part 1 1988 , cable pvc insulated elecric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2 point 5 sqmm single core frls confirming to is 1554 part1 1988 , pvc casing capping 1 inch x 6 feet long medium grade snow white , pvc casing capping 3 oblique 4 inch x 6 feet long medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 20w rechargable type 230v box type 2 feets with crca body pre coated white and prewired for led tube complete , screw full thread 6 x 19 mm isi marked comma 200 nos pkt , pvc switch board snow white size 7inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor comma 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed in service connection 10 sqmm 2 core , ceiling rose three terminal snow white , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts rechargable type , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , pvc l bend and t junction joint for pvc casing and capping , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings comma drilled with 2 nos holes for 6 mm dia near one side , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3 point 0 mm , galvanized iron strip 32 x 6 mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings comma drilled with 2 nos holes for 6 mm dia near one side , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , double sleeping bunk alongwith ply wood and mattress , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs and above with capacity 4 ltrs above min output 7000 btu per hrs incl all accessories , kassi with handle , black steel sr shovel //bid details 2 / 76 spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 m

Cast Iron Swarf Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government