Latest cast iron swarf Tenders | Government cast iron swarf Tenders

Central Government/Public Sector

CTN :40403206

30 May, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of casting for bush (hw-355.29) -- rough m/cd item as per drg. 31132027903 rev. 01 with matl. hw19996 re , casting for bush (hw-357.07) as per casting blank ( (skecth-1) mentioned in the drng. 31132027007. , casting for bush(hw-355.30. a) -- rough m/cd item as per drg. 41120209903 rev. 01 with matl. hw19996 r

CTN :40403477

03 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of casting for the item 'balancer' to drg no: 765-17-7

CTN :40443648

18 Jun, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of enhanced capacity side buffer plunger (casting) with face plate, flat csk h ead rivet, buffer spindle, bulb cotter & hex. nut m-39 x 3 in assembled condition to rdso drg.no. sk-98145, alt.12, item no. 3,5,6,7,8 & 17. matl. & speen. as per drg. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40400862

29 May, 2025 NA

Bengaluru - Karnataka

Tender For set of side casting lh & rh as per wap drg no. 704210110990 material hrcs is 4522 gr.7 (item no.1 & item no.2) note : the success full tenderer has to furnish test certificate along with supply . ]

Central Government/Public Sector

CTN :40385417

26 May, 2025 NA

Vadodara - Gujarat

Tender For supply of leader nut casting for slack adjuster type irsa 600 to rdso's drg no.wd-82064-s-07,alt-6,item-1 & confirming to rdso specifi cation no. 07-abr-1992 read with all amend.latest amendment no.4 of july 2000. specn: stone pt 22 [ warranty period: 30 months after the dat e of delivery ]

Corporations And Associations And Others

CTN :40300747

22 May, 2025 NA

Karnal - Haryana

Tender For corrigendum : casting items - casting items & trash plate, cast steel trash plate mill no. 1 drg. no. ss0124-05252501-011-0004 material:- is: 1030 gr- 280/520w, cast steel trash plate mill no. 02 drg. no. ss0124-05252501-011-0005 material:- is: 1030 gr-280/520w, cast steel trash plate mill no. 03 drg. no. ss0124-05252501-011-0006 material:- is:1030 gr. 280/520w, cast steel trash plate mill no. 04 drg. no.ss0124-05252501-011-0007 material:- is:1030 gr. 280/520w, top half to top roller bearing liner drg. no. ss 0124-05251501-011-0027 qty-01 no., feed/discharge roller bearing liner material leaded bronze (bs en 1982, 2008 gr cc495 k, table 28) qty- 2 drg no. ss0124-5251501-011-0034, bush for fibrizer hammer item code mlett 109 material phosphorus bronze bsen 1982:2008, size od 80mm, id 70mm, 56 mm width qty- 128 nos as per drg. no. ss0124-05152001-011-0005 (approx. weight- 172 kg), fibrizer hammer material grade e250a, is2062-2011 made from 56 mm plate with g.m bush fitted & duly hard faced finish wt. 225 kgs as per drg no. ss0124-05152001-011-005, cast steel scrapper mill no. 1&2 top material:- is:1030 gr, 280/520w, drg. no. ss0124-05250532-011-0054, cast steel scrapper mill no. 3&4 top material:- is:1030 gr 280/520 w, drg. no.:-ss0124-05250532-011-0055, cast steel scrapper mill no. 1, bottom material:- is:1030 gr 280/520w, drg. no.:-ss0124-05250532-011-0060, cast steel scrapper mill no. 2, bottom material:- is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0061, cast steel scraper mill no.3, bottom material:-is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0062, cast steel scraper mill no.4, bottom material:-is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0064

CTN :40295812

20 May, 2025 5.74 Lacs

Jind - Haryana

Tender For custom bid for services - outside shed maintenance assistance services-1. maintenance & necessary routine repairs for carousel & other on-line equipment & maintaining necessary records of their calibration, 2. maintenance & necessary repairs for smooth operation of chain conveyor system in the plant, 3. maintenance and necessary repairs of other equipment in the filling/storage shed., 4. maintenance of major plant equipment: carrying out `a' check maintenance of major equipment involving visual inspection, checking oil level, checking drive belt tension, greasing of moving components as & when required, checking and correcting of leakages from any joints. it will involve the following equipment: (a) air compressors (04 nos.) (b) lpg pumps (03 nos.) (c) lpg compressors (03 nos.) (d) fire engines (06 nos.) (e) jockey air compressor (02 no.) (f) jockey pumps (02 no.) (g) service water pumps (02 nos.) (h) tt gantry bays (6 nos), 5. maintenance of miscellaneous & special equipment. this involves providing technically suitable carrying out to maintain & repair (if required) of the following equipment: (a) remote operated valves (b) lpg line (vapour and liquid) gate valves, ball valves (of all sizes) (c) solenoid valves (d) frl units (all along the airlines) (e) valve crushing machine (f) valve salvaging setup (g) cylinder hydro testing machine (h) pneumatic valve testing machine. (i) paint booth (j) hydrant points and jet monitors (fixed and movable) (k) compressed air line gate valves, ball valves (all sizes) (l) service water line gate valves, ball valves (all sizes) (m) regulator test bench (n) cylinder crushing machine (o) mechanical parts of equipment related to mounded storage vessel. (p) stationary filling scales for industrial cylinder filling. (q) online degassing machine, 6. up keeping of maintenance store: this involves upkeeping of maintenance store, maintaining all records, proper stacking of material in the maintenance store. inventory log book to be maintained for the movement of items in the maintenance store. all the movements of item should be noted in inventory log book. inventory of items in the maintenance store should be match with quantity of inventory log book. party will be responsible for any variation in the inventory of items. this amount is debited to the party. welding related will also be required from fitter as on when required. 1. fabrication of ms structures like angles, bends, tees, plates, beams, channels of various sizes including scrapping & applying two coats of red oxide primer and paint to the structure. 2. removal / fixing of cast iron gate / plug/ ball valves on the pipeline. the size of the gate valves varies from 1" to 16" dia . the valves & nut bolts required for the job will be supplied by hpcl. the shifting of valve from one site to another site within installation premises shall be in contractor's scope. 3. dismantling / removal and laying of ms (erw as well as seamless) pipeline. the maximum height of the pipe line position may be 20 meters. the size of the pipeline varies from 1/2" dia to 16" dia. the shifting of pipelines from one site to another site within installation premises shall be in contractor's scope. 4. welding in ms pipeline having diameter up to 16". 5. fabrication / casting of ms reducer / enlarger of various sizes up to 10" dia and vice versa. all the material required for the job except welding rod, welding machine shall be supplied by hpcl. 6. fabrication & welding of chain conveyor system. 7. allied welding & fabrication jobs in dg shed, mcc panel, air & lpg compressor shed, pump house, cylinder filling/storage shed, fire pump house & cylinder retesting shed.

Central Government/Public Sector

CTN :40231958

26 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of side buffer casing (casting) for coaches to item 1 of rdso sk.94043, alt. 5 a nd to icf str no. icf/md/spec.-252, rev.0 of aug.`13 with amend. no. 4 of june 2022 [ warra nty period: 36 months after the date of delivery ]

Cast Iron Swarf Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector