Latest cathodic protection work Tenders | Government cathodic protection work Tenders

CTN :45419443

24 Jun, 2026 NA

Multi City - Multi State

Tender For supply of n8010-p009678 epoxy based primer for appication in ballast tank , n8010-007694 h p anticorrosive paint for use under non skid coat , n8010-007693 h p advanced non skid coating for helo and flight deck , n8010-p009604 black colour tin free spc a f paint for boottop application , n8010-p061977 anti corrosive llps alluminium , n8010-p061944 anti corrosive llps grey bronze , n8010-007509 paint polyurethane grey , n8010-007510 paint polyurethane red , n8010-007507 paint finishing ral 7040 grey , n8010-007508 paint finishing ral 9011 black , n8010-p009545 primer above water exterior for aluminium substrate , n8010-001549 international thinner gta220 , nsn8010-720488222 interthane 900 pine green ral 6028 , n8010-p009602 brown light red tin free spc a f paint for u w application , n8010-p009601 tie coat for application of tin free spc a f paints , n8010-007652 anti corrosive paint fresh water tank , n8010-p007653 anti corrosive paint avgas avcat , n8010-p009679 epoxy based anti corr paint for application in ballast tank , n8010-p009603 red brown darkred tin free spc a f paint for u w application , n8010- tb00829 intergard 269 for mild steel , n8010- p063132 sigmacover 630 grey , n8010-p061832 inter shield ena 300 bronze ani corrosive paint * /bid number : gem/2026/b/7521081 + /dated: 03-06-2026 ' ' / bid document 1 / 21

CTN :45405277

17 Jun, 2026 NA

Gurgaon - Haryana

Tender For supply of trolley to carry two cylinders material: mild steel paint: blue, powder coating wheel: i ndustrial plastic wheel covered with rubber size-4 inches load carrying capacity: 250 kgs size: as p er sample ] ]

Central Government/Public Sector

CTN :45389797

18 Jun, 2026 NA

Jagadhri - Haryana

Tender For advanced mechanized intensive de-rusting coating of lhb brake disc using spm (special purpose machine),painting of lhb & icf axle.lhb wheel disc with blue paint;identification of tender no.(e.g. wta 498,514 etc) heat no. and punching & stenciling work at all wheels at jagadhri workshop for 02 years.

Central Government/Public Sector

CTN :45372285

03 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of superior quality mild steel (m.s.) 12 locker rack with powder coating paint. size- 1800mm x1800mm x 600mm, sheet thickness- 18 gauge, depth- 600mm. detailed description as per drawing attached. note- ms sheet should conform to commercial cr-1 grade-340 of is: 513-2008 (reaffirmed 2013, fifthrev.) amendment no.01 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45391980

10 Jun, 2026 NA

Kota - Rajasthan

Tender For supply of heat resistance/heat insulation exterior paint to prevent to heat the surface, type heatex/heat shield, star shield technology, plasma coating .make- pidilite , asian , burger or similar. [ warranty period: 12 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

Central Government / Public Sector

CTN :45404458

08 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply and application of powder coating for the existing foldable snack tables of vb train-18 coaches. (the scope covers, removing existing stickers, glue, existing powder coating/paint, surface preparation and application of fresh powder coating to ral no.7035) [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

CTN :45072476

02 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras bid to ras corrigendum : supply of proprietary brand of make nerolac berger asian , birla white wall care putty water resistant white cement make nerolac berger asian , ppgi roofing sheet 10 ft x 3 ft long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4 to 5 micron epoxy primer , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa , synthetic paint enamelled og colour confirming to is 5 to 2004 , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium window triple track with frame of size 1000mm x 1000mm including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , ms anchor bolt suitable for rcc work 12mm dia 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm complete all as directed , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick 1st quality confroming to is 156 to 2006 , white cement confirming to is 8042 oblique 1989 , curtain arrangement drapery and rod made of 25 mm dia , retaining wall height 8 mtr x 3 mtr 5 nos 40 mtr cement opc 43 grade packed in hdpe bag each 50 kg wt confirming to is 8112 to 2013 , coarse sand free from vegetation confirming to is 650 to 1991 reaffirmed 2008 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch confirming to is 1597 part i 1992 reaffirmed 2002 , pvc pipe 75mm dia 3 mtr long confirming to is 4985 to 2000 reaffirmed 2006 , cement 43 grade opc packed in hdpe bag each 50 kg wt conforrn to is 8112 1989 make birla gold ambuja ultratech acc jkj daimia or equivalent , coarse sand free from vegetation , coarse aggregate 40mm graded , hardcore 63 90 mm graded , brick sub class , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe foot valve and connected accessories complete all as specified , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud conforming is 13032 is 8623 double door type make havells legrand l and t , mcb spn 240 volts 32 amps make havells l and t standard , mcb sp 6 to 32 amps make havells l and t standard , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal , cable pvc insulated electric cables heavi duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty of size 1.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conducter of size 2.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , pvc casing capping of size 1 inch medium grade snow white make presto polycab finolex , pvc casing capping of size 3 oblique 4 medium grade snow white make presto polycab finolex , modular switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona , led tube light fitings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tube //bid details 2 / 70 complete make havells bajaj philips crompton , led mirror lights 1 feet 5 watts make havells bajaj philips crompton , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 6 inch x 6 inch for sockets and switches make supreme polycab finolex , pvc switch board snow white size 7 inch x 4

CTN :45099313

02 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 26b80l006 h. p advanced non-skid coating for helo & flight deck (n8010-007693} , 26b80l006 h. p anticorrosive paint for use under non-skid coat (n8010-007694)

Cathodic Protection Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

State Government