Latest cathodic protection work Tenders | Government cathodic protection work Tenders

Central Government / Public Sector

CTN :40920205

23 Jul, 2025 44.10 Lacs

Rampur-Up - Uttar Pradesh

Tender For corrigendum : supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 , thinner for epoxy paints (bhel) , turpentine oil as per is 533: 2007

State Government

CTN :40314448

22 Jul, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of ht motors spares for emd-1,wtps,gsecl. - skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic jack with pump & accesories capacity: 100 mt., hydraulic jack with pump & accesories capacity: 50 mt., greasing pipe for ht motors - r1 type hydraulic hose pipe ( rubber hose with single inner wire braiding), araldite 180 gram/tube, red insulating varnish-class f epoxy insulation & protection coating., dr. back make backtol red in 1 lit. tin varnish, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., brass connectors for pstb of ht motor, plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., insulating cable gland for pstb of ht motor, grease gun, fevicol sr 998 (200 ml/tin), self fusing rubber tape black , class b , 31 kv die electric strength , size 2.5 cm x 10 mtr., pvc tap roll, insulating box for pstb for ht motor, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, z 801 fast steel epoxy stick (1 stick - 114 grm), impact wrench power/battery operated, cordless screw driver power/battery operated, w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, becktol gray varnish in 1 ltr tin dr.back make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v

State Government

CTN :40698938

24 Jul, 2025 4.53 Lacs

Korba - Chhattisgarh

Tender For corrigendum : work contract for anticorrosive glass flake epoxy coating on circulating water pump (cw pump) & raw water pump spares i.e suction casing, discharge casing, impeller liner casing, column pipe elements etc. of 2x250 mw, dspm, tps korba (east)

CTN :41012561

30 Jul, 2025 6.39 Lacs

Kinnaur - Himachal Pradesh

Tender For supply of thinner compatible with red oxide primer & enamel paint. , two component epoxy coating

CTN :41016518

17 Jul, 2025 1.27 Crore

Multi City - Multi State

Tender For construction of hostel block (g plus 4), academic research block (g plus 2) with food court, utility and common services at thaiyur b village for iit madras discovery campus. subhead: miscellaneous works comprising construction of masonry storm water drains with frp covers, aluminium louvers and glazing works, stainless steel works, ceramic tile cladding, epoxy coating in sump, external water supply lines including control valves to the water supply network, upvc joineries, rolling shutters, water fountain wall finishing including logo and other associated workssubwork/packages:miscellanous works comparising construction of masonry storm water drains with frp covers, aluminium louvers and glazing works, stainless steel works, ceramic tile cladding, epoxy coating in sump, external water supply lines including control valves to the water supply network, upvc joineries, rolling shutters, water fountain wall finishing including logo and other associated works

CTN :41005132

21 Jul, 2025 5.08 Lacs

Nellore - Andhra Pradesh

Tender For conducting spark test and carrying out fiber reinforced epoxy patch work protective coating to the identified damaged portion on condenser water boxes inner surface of unit-2 during overhaul period for the year 2025-26

CTN :40974067

26 Jul, 2025 NA

Vadodara - Gujarat

Tender For est of hyd trg lab with integrated facility for hyd system - puf panel sheet, both side 0.40mm ppg sheet, colour white ral 9002, pud density: 04 kgm3, panel joint : overlapped, thickness 50mm with installation, aluminium sliding door (6 ft width x 7 ft height), aluminium section (1.2 mm thick black powder coated section) with 5 mm thick bakelite sheet and 5mm thick black semi-transparent glass (saint gobin), grid ceiling with 2'x2' grid distance, epoxy coating on floor & colour: blue, necessary electric point (wire: r.r cable & switch:, anchor, 1) ac points, ii) fan points (wall mount), iii) 15 amp points, iv) 05 amp points, v) main junction box with mcb, vi) led light points, led lights 2'x2' (syska/crompton/ panasonic) 36w, split acs 1.5 ton (lloyd), 3-star inverter, work table with fabricated of ms pipe with plywood with 3 drawers duly powder coated size:4' x 3', work table with fabricated of ms pipe with top plywood with 5mm rubber sheet 3 drawers powder coated, size:6' x 4', fabrication frame work with ms pole and perlin with black oil paint (10ft height with necessary structure) and r.c.c in foundation., shed over fabrication work of ceiling (0.5mm jindal), colour: white, bty operated crane 5 ton, i) lifting capacity - 5 ton, ii) lifting hight-500mm, iii) lower hight-500 mm, iv) safety features- self braking sys, v) usage indoor, portable & shop floor, vi) total boom length- 1200mm

CTN :40854268

11 Jul, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of high performance anti corrosion epoxy coating partno r600165500

State Government

CTN :40732676

11 Jul, 2025 18.58 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work contract for anti-corrosive, anti-erosion, anti-abrasive polymeric epoxy coating on surface of condenser tube sheet and water box installed at unit-4, 2x660 mw, sstpp,mppgcl,dongalia.

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

Cathodic Protection Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

State Government

State Government