Web Analytics Made Easy - StatCounter

Cathodic Protection Tenders

Get complete information related to latest Cathodic Protection Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cathodic Protection Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cathodic Protection Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :45397974 Due date: 11 Jun, 202611 Jun, 2026 80.77 Lacs
Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

CTN :45252496 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For bid to ras supply of isa 50x5x20 ft , flat 40x5 , earth work excavation , epoxy based zinc rich protective coating and primers in steel single coating , synthetic enamel painting , wire mesh , concrete foundation , installation and commissioning charges

Central Government/Public Sector

CTN :45398825 Due date: 24 Jun, 202624 Jun, 2026 16.64 Lacs
Tender For epoxy painting work of head gear frame (39mtr height) and other connect structures of narwapahar mines, jharkhand

Central Government/Public Sector

CTN :45395926 Due date: 04 Jun, 202604 Jun, 2026 NA
Tender For supply and application of set of pu paint system materials for coach no sr ra 066876 /c as per scope of work enclosed [ warranty period: 30 months after the date of delivery ] ] - - epoxy primer (two pack)as per. m&c/pcn/100/2018, tie coat (two pack)as per. m&c/pcn/114/2020, degreaser, body filler as per mdts/176-rev 4, polyester putty as per m&c/pcn/100/2018, polyurethane surfacer (part a & part b)to rdso specn. no. m&c/pcn/100 of 2018, full gloss polyurethane enamel ruby red (two pack) (part a & part b) to rdso specn. no. m&c/pcn/100/2018, full gloss polyurethane enamel black (two pack) (part a & part b)to rdso specn. no. m&c/pcn/100/2018, polyurethane aluminium paint to rdso specn. no. m&c /pcn/100/2018, polyurethane thinner compatible to rdso specn. no. m&c/pcn/100/2018, application of stickers in golden yellow colour (isc no-356)as per requirement like coach number, poh date, owning rly, coach code, capacity, etc to spec mdts/156/rev.5, pu metallic clear coat to rdso specn no. m&c/pcn/100/2018

State Government

CTN :44862392 Due date: 11 Jun, 202611 Jun, 2026 NA
Tender For corrigendum : work of supply and application of anti-corrosive epoxy paint on various structure of boiler at stage i (1 to 3) wtps during aoh and on as & when required basis.

State Government

CTN :45382897 Due date: 08 Jun, 202608 Jun, 2026 13.48 Lacs
Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

CTN :45267239 Due date: 08 Jun, 202608 Jun, 2026 4.91 Lacs
Tender For corrigendum : work of strengthening of the foundation of coal mill3d by epoxy material at kstps, kota

CTN :45072476 Due date: 02 Jun, 202602 Jun, 2026 NA
Tender For bid to ras bid to ras corrigendum : supply of proprietary brand of make nerolac berger asian , birla white wall care putty water resistant white cement make nerolac berger asian , ppgi roofing sheet 10 ft x 3 ft long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4 to 5 micron epoxy primer , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa , synthetic paint enamelled og colour confirming to is 5 to 2004 , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium window triple track with frame of size 1000mm x 1000mm including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick including all fittings and as directed aluminium section weighing 0.55 kg oblique mtr , ms anchor bolt suitable for rcc work 12mm dia 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm complete all as directed , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick 1st quality confroming to is 156 to 2006 , white cement confirming to is 8042 oblique 1989 , curtain arrangement drapery and rod made of 25 mm dia , retaining wall height 8 mtr x 3 mtr 5 nos 40 mtr cement opc 43 grade packed in hdpe bag each 50 kg wt confirming to is 8112 to 2013 , coarse sand free from vegetation confirming to is 650 to 1991 reaffirmed 2008 , coarse aggregate 40mm graded confirming to is 383 2016 , stone boulder 9 inch to 12 inch confirming to is 1597 part i 1992 reaffirmed 2002 , pvc pipe 75mm dia 3 mtr long confirming to is 4985 to 2000 reaffirmed 2006 , cement 43 grade opc packed in hdpe bag each 50 kg wt conforrn to is 8112 1989 make birla gold ambuja ultratech acc jkj daimia or equivalent , coarse sand free from vegetation , coarse aggregate 40mm graded , hardcore 63 90 mm graded , brick sub class , three phase 1.2 hp monoblock pump 430 volt complete with and incl 3 mtr length required size flexible suction pipe foot valve and connected accessories complete all as specified , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud conforming is 13032 is 8623 double door type make havells legrand l and t , mcb spn 240 volts 32 amps make havells l and t standard , mcb sp 6 to 32 amps make havells l and t standard , pvc tape 19mm wide 5 m long make steelgrip anchor kinjal , cable pvc insulated electric cables heavi duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty of size 1.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conducter of size 2.5 sqmm single core frls confirming to is 1554 part i 1988 make havells finolex polycab , pvc casing capping of size 1 inch medium grade snow white make presto polycab finolex , pvc casing capping of size 3 oblique 4 medium grade snow white make presto polycab finolex , modular switch piano 5 amp 230 volts flush type one way snow white make anchor ssk cona , led tube light fitings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tube //bid details 2 / 70 complete make havells bajaj philips crompton , led mirror lights 1 feet 5 watts make havells bajaj philips crompton , screw full thread 6 x 19 mm isi marked 200 nos pkt , pvc switch board snow white size 6 inch x 6 inch for sockets and switches make supreme polycab finolex , pvc switch board snow white size 7 inch x 4

State Government

CTN :45038653 Due date: 03 Jun, 202603 Jun, 2026 23.72 Lacs
Tender For corrigendum : work contract for epoxy and synthetic painting of condensate storage tank and epoxy painting of dm water storage tanks of ph i and ph ii at sgtps, mppgcl, birsinghpur

State Government

CTN :45107237 Due date: 12 Jun, 202612 Jun, 2026 NA
Tender For corrigendum : work of applying anti-corrosive epoxy paint to various transformers, mk boxes, lighting tower, 11kv o/h rail pole and structures of switchyard area at gsecl, kadana & panam hydro electric projects.
 Loading, Please wait...

Connect us via What's Up