Latest cathodic protection Tenders | Government cathodic protection Tenders

corporations/Associations/Others

CTN :45375768

02 Jun, 2026 9.86 Lacs

Kanpur - Uttar Pradesh

Tender For : supply of m.s. pipe on damaged dot nala from shrishti car accessories harsh nagar to krishna car décor harsh nagar under ward-05 jawahar nagar and ward-37 ashok nagar in zone-4. - supply by ms pipe with food grade epoxy coating 406 micron outside and cement mortar lining 12mm inside and its manufacturing follows the is codes 3589:2001 including and carting from store to site including octori /entry taxes or any taxes other than gst and freight charges from factory to site etc as per direction of engineer in charge. 1300mm dia (16mm thickness excluding cm lining), add 18 % g.s.t. - supply by ms pipe with food grade epoxy coating 406 micron outside and cement mortar lining 12mm inside and its manufacturing follows the is codes 3589:2001 including and carting from store to site including octori /entry taxes or any taxes other than gst and freight charges from factory to site etc as per direction of engineer in charge. 1300mm dia (16mm thickness excluding cm lining), add 18 % g.s.t.

Central Government/Public Sector

CTN :45338299

25 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-11 no. 2).type of construction vulcanized rubber upper and sole. 3).last/ sole patternpsv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation/ohe (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra = slip resistance on ceramic tile/stone ballast with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectric footwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified) reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanized rubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact and astm f2413 compression tests. 12). chemical resistance sole & upper -good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packingrecyclable polybag & 6 pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-11 no). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45291640

12 Jun, 2026 NA

Ropar - Punjab

Tender For supply of tubular anode with coke breeze , technical audit of cathodic protection system

Central Government/Public Sector

CTN :44996821

09 Jun, 2026 NA

Jorhat - Assam

Tender For corrigendum : installation of impressed current cathodic protection system in 4 inch 14 km ksab to adarshgaon t-point pipeline.

Central Government/Public Sector

CTN :45077852

04 Jun, 2026 NA

Rajkot - Gujarat

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 5-11 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved en iso 20345 :2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistantoutsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectricfootwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified)reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanizedrubber outsole good abrasion resistant for extra durability heel energy absorption design tominimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-11 as per attached chart) [ warranty period: 12 months after the date of delivery ]

CTN :45138857

30 May, 2026 NA

Howrah - West Bengal

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-9 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance(esr) protection. 7). dielectricfootwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified)reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanizedrubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 6-10). (size and quantity details furnished in annexure). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45247039

09 Jun, 2026 NA

Jorhat - Assam

Tender For installation of impressed current cathodic protection system in 4 inch 14 km ksab to adarshgaon t-point pipeline.

CTN :45177126

02 Jun, 2026 11.00 Lacs

Delhi - Delhi

Tender For supply of pop powder - hospital grade , ethaflex crosslinked sheet , ethaflex crosslinked sheet 6mm , co-pp sheet 3mm , co-pp sheet 5mm , co-pp sheet 12mm , velcro hook and loop 1 inch , velcro hook and loop 1.5 inch , velcro hook and loop 2 inch , nylon strap 1inch , nylon strap 1.5 inch , nylon strap 2inch , aluminum rivets , copper rivet , d-rings 1 inch , d-rings 1.5 inch , d-rings 2 inch , nut , bolt 1.5kg , washer , carbon fiber mat , double sided thin tape for carbon fiber , stockinette roll cotton 30mm , stockinette roll cotton 60mm , stockinette roll cotton 100mm , hosiery cotton cloth , brown paper , polyester resin , accelerator - polyester resin , catalyst polyester resin , cosmetic stocking below knee , cosmetic stocking above knee , removable mandrel ak , removable mandrel bk , talcum powder , granules low temperature polyethylene , wire mesh , epoxy resin , hardener , pigment , bolt , rubber adhesive , rubber sheet , drill bit , surgical blades , very thin cling film , copying pencil , glass marking pencil , pvc film , pvc tape , low temp. thermoplastic sheet , jig saw blade , teflon sheet , pediline sheet , leather lining , strap leather - sheep leather , swede leather , leather chrome - softy , buffalo hide , mcr sheet , mcr sheet 8mm thick , rubber sole -raising sheet , nitrile rubber sheet -nir rubber , bifurcate- chirwa , fibre glass mattress , press button small , press button large , thread -sewing machine , pp sheet , sand paper ) /bid number : gem/2026/b/7499335 * /dated: 12-05-2026 & & / bid document 1 / 74

Central Government / Public Sector

CTN :45109452

21 May, 2026 56.18 Lacs

Bolpur - West Bengal

Tender For annual rate contract for rcp sv maintenance of cp cathodic protection and electrical under jurisdiction of erpl bolpur including bolpur station

Central Government/Public Sector

CTN :45056752

25 May, 2026 NA

Vadodara - Gujarat

Tender For supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as per attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel toe. 1). size range : 6-9 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern psv & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for working environment with high voltage hazards power station operations substation (step-up/ step-down/ distribution) operations electrical hazards with wet condition/ water exposure high current leakage hazardselectrical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved ? en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate csa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock resistance (esr) protection. 7). dielectric footwear* astm f1117-03(2013) (min 20,000vac) 8). lining material selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-proof (electrically verified) reinforced rubber upper high visibility with orange and green contrast easy for cleaning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resistant vulcanized rubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 impact andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards acids and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pairs in a carton. various sizes of electrical safety shoe as per requirement (size 5-12) [ warranty period: 30 months after the date of delivery ]

Cathodic Protection Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors