Latest cement concrete bench Tenders | Government cement concrete bench Tenders

CTN :45655338

27 Jun, 2026 4.16 Lacs

Vikarabad - Telangana

Tender For procurement of manholes and materials for repairs and maintance to ugd pipelines in vikarabad municipality under municipal general funds - raising of existing manholes to additional height by laying cc (1:3:6) cover bed block of clear dia 0.56m including the cost and conveyance of all materials and curing for 21 days complete all taxes seignarage charges as per specification etc complete. , phe-ljsw-13: supply, lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and spun yarn including cost and conveyance of pipe. (reference to specifications bis no. 6530/72) - 150mm dia , manufacture as per bis:12592 (part 1&2) supply & delivery of manhole covers and frames with isi marking anywhere in t.g., f.o.r. destination including, loading, un-loading & stacking at site but excluding all taxes, as applicable.i.s.i mark - h.d.-20 with 500mm dia clear opening , earthwork in excavation for pipeline trenches as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth (rbr-fndn-1 -manual means) , dismantling of cement concrete benching around the manhole frame carefully without damaging the frame and removal and refixing of manhole frame true to alignment and gradient of the road as directed by the engineer in charge including cost of labour etc. complete for finished item of work. , cutting opencc road surface (as well as asphalt concrete upto 75 mm thick ) including water bound macadam and stacking of excavated materials for pipe line trench work. as directed by the departmental officers. , construction of sewer circular conical manhole as per type design using flyash bricks of size 290 x 225 x 140 mm having minimum crushing strength 75 kgs per sqm as per is:12894-1990 - class - 7.5 using sulphete resisting cement in cm (1:6) prop; including cc (1:4:8) bed for foundation and of m15 (1:2.5:5) prop. using 20mm hg metal for benching and channels, inside plastering with 20mm thick using sulphete resisting cement in cm (1:3) prop; and outside plastering with 20mm thick using opc in cm (1:3) prop; the foundation concrete in cc (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block / masonary wherever necessary including finishing the gap with cm (1:3) prop. on both the sides including excavating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (hd-20) and pvc encapsulated steps including cost & conveyance of all material, labour and all other incidental and operational charges etc., complete

CTN :45486616

29 Jun, 2026 5.00 Lacs

Ludhiana - Punjab

Tender For supply of reinforce cement concrete benches.

corporations/Associations/Others

CTN :45246681

11 Jun, 2026 NA

Panaji - Goa

Tender For corrigendum : supply of variousitems to - customised precast rcc product as per specific drawings and design provided by indenting depatment including different grades of concrete,reinforcement and centering and shuttering ,curing etc,complete items as per below mentioned grade

CTN :45349762

09 Jun, 2026 2.95 Lacs

Sikar - Rajasthan

Tender For procurement of materials for repair of various components used in the fixing of light poles installed across of the failure different wards within municipal area - 61.13 p/l of double wall corrugated hdpe pipe confirming to is 16205 p-24, stiffness class 750 n, externally corrugated and having smooth surface inside with hdpe coupler, elbow, tee at required depth below the ground for laying cable of following nominal outer dia. mfr test report from nabl accrediated is to be submitted. (excavation of earth & back filling with compaction is to be paid extra) all as per pre approved by engineer in-charge.. for additional technical parameters of products/ work, refer annexure "a" attached with this bsr 50mm dia. , providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured copper cable confirming to is:1554 p-i / is:7098 p -i of 1.1 kv with electrolytic grade copper made of copper rods confirming to is 613-1964, of purity >99.7%, inner/outer sheath confirming to is:5831 in existing rcc/hume/stoneware / pvc pipe/open duct/cable trench/cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810 for additional technical parameters of product / work refer annexure 'a' attached with this bsr 3 core , supplying and making one end termination with nickel plated heavy duty brass single compression gland (as per is 12943-1990)) sibg type consisting of check nut, gland body, metal washer(3 nos.), outer seal rubber ring, compression nut, heavy duty aluminium lugs (as per is 8309-1993) duly crimped with crimping tool, pvc tape as per is 8337-1976 of following size of pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in-charge. for additional technical parameters of products/work, refer annexure "a" attached with this bsr 4 x 10.0 sq.mm pvc tape roll , supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discom's specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure "a' attached with this bsr type a lt connector for aerial bunched cable each 73.00

Corporations/Associations/Others

CTN :45243315

28 May, 2026 33.21 Lacs

Parola - Maharashtra

Tender For proposed fixing cement concrete benches at various spaces in parola municipal council boundary premisses

CTN :45201409

01 Jun, 2026 6.26 Lacs

Moga - Punjab

Tender For corrigendum : provide & fixing of precast cement concrete benches in different wards in the city baghapurana

CTN :45001606

16 May, 2026 1.77 Lacs

Barabanki - Uttar Pradesh

Tender For installation of color cement concrete bench sitla mata mandir thakur dwara ward in nagar panchayat haidergadh.

CTN :44808034

20 Apr, 2026 15.00 Lacs

Alwar - Rajasthan

Tender For work of providing electrical repairing material for led lights installed in the municipal area. - providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i/is:7098 p-1 of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6%, inner / outer sheath confirming to is:5831 in existing rcc/hume/stoneware / pvc pipe/open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 1 6x 2 sq. mm. (insulated) , providing & fixing of 240/415 v ac mcb with positive isolation ka breaking capacity (b/c/d tripping characteristic as load and site requirement) 4 kv impulse withstand voltage, isi marked is 8828(1996)/conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum, energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm., conductor line load reversibility, ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 a rating and 10,000 upto 63 a, 5000 for 80 a & above rating including making connections, testing etc. as required. oem shall have submit nabl/cpri / erda accrediated lab type test reports & all as per pre approved by engineer in 0.5 a to 5 a ratin , double pole mcb(with b/c curve tripping characteristics) , four pole mcb (with b/c curve tripping characteristics) , supplying and fixing of aluminium (iec 60105 iso 209-1,2) / copper (iec 60028) bus bar by means of smc / dmc type insulator with standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending, cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. all as per pre approved by engineer in-charge. for additional technical parameters of products/work, refer annexure "a" attached with this bsr. , main panel street light control panel commissioning kiosk type weathe proof panel out door main cubic panel size 750x1250x500 they shall be in two section comaring as follows bsr 2017 (59.57) , supply & drawing wiring for sub mains isi marked (is:694) 110volts grade pvc insulated flat twin core sheathed solid aluminium 4 sq mm 2 core flat