Latest certification Tenders | Government certification Tenders

Central Government/Public Sector

CTN :45664250

08 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For supply of 2mp bullet type ip camera up 30 mtrs having stqc certification as per rdso spec. rdso/spn/tc/65/2021 or latest. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45649377

02 Jul, 2026 NA

Tinsukia - Assam

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - statutory testing, inspection, cleaning, calibration, certification & painting of 03 x600 mt mounded lpg storage bullets at lpg bottling plant gopanari; statutory tes..

Central Government/Public Sector

CTN :45665004

23 Jul, 2026 NA

Multi City - Multi State

Tender For supply and configuration of digital trans-receiver handheld 5 watt vhf set conforming to clause 5b of rdso specification no. rdso/spn/tc/107/2018 ver, 2.0 or later, along with two set of oem approved rechargeable batteries including one as spare, additional requirements: 1) warranty :- warranty for radios and rapid chargers shall be at least 5 years and warranty for battery packs shall be for at least 1 year. material should be mtcte approved or certification may be given by the participant that valid mtcte certificate will be presented before commencement of deliveries. [ warranty period: 60 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664701

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of rewirable type 100 amp, 415 volt ac porcelain fuse units (kitkat fuse). each unit must consist of a fuse base and carrier having robust insulation, suitable to fit into existing 100a, 415 volt tpn rewireable switch fuse units of selvo make. utilization category: ac-22a, contacts must be made of heavy-duty electrolytic copper plated with silver. the fuse units must conform to is 2086:1993, and the fusewires must conform to is 9926:1981. the supplier must provide a sample of 3 fuses for approval prior to the bulk supply of material. at the time of bidding, the bidder must submit a valid bis/isi certification if they are the oem. if the bidder is a non-oem, they must submit a valid oem authorization letter along with the oem?s valid bis certification. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45665698

29 Jun, 2026 8.40 Lacs

North Tripura - Tripura

Tender For providing of bis certification marked alumino ferric (grade-4 of is 299 2012 fifth revision with latest amendment) carrying to swtp and innovative scheme including loading unloading and stacking at site under dws sub-division kanchanpur. (3rd call)

State Government

CTN :45665700

29 Jun, 2026 9.80 Lacs

North Tripura - Tripura

Tender For providing of bis certification marked alumino ferric (grade-4 of is 299 2012 fifth revision with latest amendment) carrying to swtp and innovative scheme including loading, unloading and stacking at site under dws sub-division dasda.(3rd call)

Central Government/Public Sector

CTN :45663751

29 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply, installation and commissioning of desktop computer as per the following specifications.l)processor: core i3-12th generation or better version. 2)ram : 8gb ddr4 or higher. 3)operating system: windows 11 professional .4) display: led backlit monitor of minimum 21.5 inches size. 5) monitor resolution (pixels): 1920xl080 or higher. 6) tco certification for monitor: 8 or higher. 7) storage: 512 gb or higher ssd. s)key board and mouse- wired/wireless. 9) wireless connectivity: available (in built). 10) type of ethernet ports :l0/100/1000 on board integrated gigabit port .11) on site oem warranty (year)- 3 years.make: hp/dell/lenovo/acer [ warranty period: 36 months after the date of delivery ] ]

State Government

CTN :45665503

03 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For work of carrying out actual load test and certification, overhauling and supply of recommended spares for eot cranes installed at bltps, padva.

corporations/Associations/Others

CTN :45417503

30 Jun, 2026 1.29 Crore

Kolkata - West Bengal

Tender For corrigendum : appointment of an agency for pirpainti barahat coal mine through qcbs - “appointment of an agency for pirpainti barahat coal mine through quality and cost based selection (qcbs) mode of evaluation for preparation of topographical survey and preparation of surface plan, forest patch survey (without pillaring) and preparation of forest maps in gis platform, land schedule preparation including purchase of cadastral sheets and data sets from the local authority, certification from forest and revenue department of the land schedule, certification of block boundary/ other documents from cmpdi, preparation of application for section 4 and issuance of notification of section as per the coal bearing areas (acquisition and development) act, 1957 from ministry of coal, geological report (gr) preparation and its approval, preparation and approval of mining plan and mine closure plan including peer review from mining plan preparing agency (mppa)”.

Central Government/Public Sector

CTN :45666219

14 Jul, 2026 19.92 Lacs

Umiam - Meghalaya

Tender For supply of cylinder side casting frame , main gear , pinion gear casting , pedal spacer guide casting , bottom pedal casting , cylinder side bearing house casting , cross casting , connecting rod bearing housing casting , ms casting for fixing the blades , m.s. flat 20 x 3 mm , m.s. flat 30 x 6 mm , m.s. flat 50 x 5 mm , saw blade 2 and half inch size , m.s sheet 4x8 sq.feet 16 gauge , m.s sheet 4x8 sq. feet 18 gauge , m.s sheet 4x8 sq.feet 14 gauge , stainless steel sheet 304 grade 4x8 feet 1.2 mm thickness , ms equal angle 40 x 40 x 5 mm , ms equal angle 25 x 25 x 5 mm , ms equal angle 30 x 30 x 5 mm , ms equal angle 50 x 50 x 5 mm , ms rectangular pipe 3 inch x 1 inch , ms channel 20 mm , black conduit pipe 25 mm outer dia , ms square pipe 1 inch heavy , ms square pipe 2 inch heavy , ms square pipe 1 and one-fourth inch , ms square pipe half inch 15 feet length , plain pipe 25 mm outer diameter , ms rod 8 mm , ms rod 10 mm , ms rod 12 mm , ms square rod 10 mm , ms square rod 8 mm , ms cold roll bright bar 25 mm 20 feet length , ms cold roll bright bar 40 mm 20 feet length , gi nuts and bolts 9 mm diameter and 90 mm length , gi nuts and bolts 6 mm diameter and 45 mm length , gi nuts and bolts 8 mm diameter and 45 mm length , gi nuts and bolts 13 mm diameter and 127 mm length , gi nuts and bolts 10 mm diameter and 85 mm length , m s washer 10 mm inner diameter 25 mm outer diameter , m s washer 8 mm inner diameter 50 mm outer diameter , m s washer 19 mm inner diameter 50 mm outer diameter , m.s rivets 4 mm diameter x 5 mm length flat head , m.s rivets 5 mm diameter x 12 mm length round head , welding electrodes 2.50 mm size , welding electrodes 3.15 mm size , enamel paint mint green , thinner for paint , trolley wheel 8 inch size with 23 mm shaft size , ball bearings 6202 size , ball bearings 6200 size , cut off wheel size 355 x 2.8 x 25.4 mm , cutter grinder wheel 105 x 1.2 x 16 mm , flap disc 60 grit size 100 x 16 mm , grinding disc 105 x 1.2 x 16 mm , coal coke fuel , cotton jute , pillow block bearing p205 id 25 mm diameter , pillow block bearing f205 id 25 mm diameter , rubber dotted for plucker cleaning machine 10 x 2 x 3 cm lxwxh , cycle frame double bar ph type 22 inch size , crank and pedal for cycle 60 teeth with 210 mm diameter , cotter pin lock for crank and pedal 10 mm , 22 teeth sprocket freewheel rear flywheel 34 mm inner diameter , bicycle chain pitch 12.7mm, width 3.17 mm, 8 feet length , stainless steel allen counter sunk screw 6 x 25 mm , stainless steel allen counter sunk nuts 6 mm , stainless steel allen counter sunk washer 6 mm , high speed steel planer blades 90 x 39 x 3 mm , ms heavy duty hatch hinge free swing 37 mm l x 67.5 mm w x 2 mm t , ms hinge 3 inch , chrome finishes ms tower bolt 3 inch size for door , water soluble cutting oil metal working fluid, iso certified , machine oil ep 68 with iso certification , hydraulic oil 68 iso certified , ms taps bsw 1 by 8 inch, 5 by 32 inch, 3 by 16 inch, 1 by 4 inch, 5 by 16 inch, 3 by 8 inch , ms taps metric 9 mm and 10 mm , carbide end mill 8 mm and 10 mm , combination spanner set from 3 mm to 22 mm size , bicycle grip handle , combination plier 7 inch , flat nose plier 6 inch , carbon brush for 4 inch angle grinder //bid details 2 / 67

Certification Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors