Latest certification Tenders | Government certification Tenders

Central Government/Public Sector

CTN :42265275

03 Nov, 2025 NA

Lakshadweep - Lakshadweep

Tender For corrigendum : attending repair/revamping works of 03 nos. 30 ton capacity, 20 feet manual spreaders at haddo wharf in sri vijaya puram. - attending repair/revamping of 30 ton capacity, 20 feet manual spreader by dismantling of wire rope slings, d-shackles, twist-locks, pins and bushings, wire brushing and cleaning of the spreader s corroded/dirty surfaces, identification of cracks, welding of cracks if any required of the spreader s main frame and guide plates using approved electrodes, replacement/fabrication of damaged members, grinding and finishing of welded surfaces, repair/replacement of twist-lock assemblies, pins and bushes, machining of worn-out parts to original dimension and tolerances, re-assembling of all the removed and repaired items after attending necessary welding, machining works. welding works are to be done properly in conventional method as per the direction of eic, all the items are to be aligned properly in conventional method as it was in original, checking of alignment of the spreader, complete cleaning of the entire surface of the spreader and making it rust-free, application of one coat of anti-corrosive primer and two coats of approved marine-grade enamel paint, making trial run for functionality of twist-locks, load testing the spreader, d-shackles, wire rope slings as per the standards, certification of the tested spreader and accessories including cost of all labour charges, material charges, tools and plants, all port dues and taxes, transportation charges i.e., sending of the spreader to kolkata for carrying out repair/revamping works, load testing, certification and bringing back to haddo wharf, sri vijaya puram etc. complete.

CTN :42298598

03 Nov, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - custom bid for services - valce salvaging job; f work covers salvaging of defective sc valves and restoring them for reuse as per standard procedures and instructions of the officer-in-charge. the contractor shall carry out the following activities in a safe, systematic, and accountable manner: 1. salvaging operations salvaging of defective sc valves shall be carried out as per laid-down procedures using the valve test bench and/or any other equipment or method advised by the officer-incharge. the contractor shall collect defective sc valves from the store after obtaining necessary approvals. 2. cleaning & preparation clean all defective sc valves in the ultrasonic valve cleaning machine and/or other approved valve cleaning systems. ensure all valves are thoroughly cleaned to remove dirt, oil, or contaminants before testing. segregate cleaned valves properly for further inspection and testing. 3. segregation & testing segregate valves based on their source (e.g. hot repair, defective, pin leak, scrapable cylinders, etc.). perform low pressure and high pressure testing of the valves as per laid-down procedures and test parameters. identify valves that are fit for reuse and those that are defective/rejects. 4. salvaging & assembly replace the old o -ring washer of all good salvaged valves with new o -ring washers (to be provided by hpcl). fit safety caps and back covers on the salvaged valves to protect them from dust and contamination. ensure salvaged valves are clean, properly assembled, and ready for storage. 5. storage & documentation arrange salvaged valves type-wise in a countable and organized manner and deposit them in the stores. ensure proper handling to avoid damage or mixing of valve categories. maintain shift-wise records of: o number of valves received, o number of valves cleaned, tested and salvaged, o number of valves rejected. 6. manpower & productivity contractor shall provide minimum one manpower per shift. a minimum target of 400 sc valves shall be salvaged per manpower per shift. inventory of defective valves pending salvaging shall not exceed one day s generation. 7. materials & consumables hpcl shall provide o -ring washers, safety caps, back covers, and other reusable fittings. kerosene and other cleaning consumables shall be supplied by the vendor. contractor shall ensure availability of all tools and accessories required for smooth execution. 8. certification & payment the shift officer shall certify the salvaged quantity at the end of each shift. payment shall be made strictly on actual quantity salvaged and accepted by hpcl. any deviation or failure to meet daily targets may attract penalty as per tender terms. 9. safety & compliance all activities shall be carried out in compliance with hpcl safety norms and oisd guidelines. personnel shall wear required ppe (gloves, goggles, shoes, helmet) during operations. all salvaging and testing activities shall be conducted under the supervision of hpcl personnel.

CTN :42312021

01 Nov, 2025 52.3 Thousand

Chandigarh - Chandigarh

Tender For corrigendum : providing of financial audit services - internal audit and certification of financial statements of ngos and peripheral units, audit report, review of financial statements, financial reporting framework; cag empaneled audit or ca firm

CTN :42356937

17 Nov, 2025 NA

Bangalore - Karnataka

Tender For supply of development of e-certification system phase 1a

CTN :42372440

01 Nov, 2025 NA

Goa - Goa

Tender For corrigendum : supply of procurement and installation of iso certification signage boards and display materials d d - illuminated organization logo , customized poster , side covering arrangement for invertor and battery , stickering and frosting of glass door , iso certification display board , iso certification poster high quality

Central Government/Public Sector

CTN :42374997

03 Nov, 2025 NA

Bangalore - Karnataka

Tender For providing of custom bid for services - scope of service for recertification audit of iso 45001-2018 as per annexure,custom bid for services - 1st survelliance audit of iso 45001:2018 for year 2027,custom bid for services - 2nd survelliance audit of iso 45001:2018 for year 2028,custom bid for services - internal audit training of iso 45001:2018 for 20 participants with certification

CTN :42375546

05 Nov, 2025 50.0 Thousand

Dharmapuri - Tamil Nadu

Tender For corrigendum : tender notice for inspection and certification of conveyor belts, stacker and loader

CTN :42377591

05 Nov, 2025 50.0 Thousand

Dharmapuri - Tamil Nadu

Tender For corrigendum : tender notice for inspection and certification as per factories act and rules

Central Government/Public Sector

CTN :42379479

10 Nov, 2025 6.00 Lacs

Bangalore - Karnataka

Tender For providing of hiring of agency for iso certification service - iso 9001 - quality management system (qms), iso 21001 quality management systems; consulting, initial audit, surveillance audit, re-certification audit; guidance for documentation and implementation of..

CTN :42402853

05 Nov, 2025 1.10 Crore

Fatehgadh - Uttar Pradesh

Tender For supply of mukhya mantari samuhik vivah yojana samigri c c - saree with blouse-5 each 5.5m , peticoat-5 matching with saree colour , chunari 2.25m , pant fabric 1.20m , shirt fabric 2.25m , feta or gamchha 2.25m , chandi ka payal one pair 30gram 65tanch , one pair chandi ki bichhiya 10gram 65tunch with certification , stainless steel dinner set 8kg , cooker 5ltr isi mark , aluminium kadhai 5kg , trolley bag branded 47bx28dx66h cm , vanity kit -1 fiber box , wall clock , ceiling fan 1200mm , cool cause 10 ltr , iron press , double bed sheet one 228.6x254cm with two pillow cover , blanket-2 single bed double layer each 160x230 cm , gadda or mattress two with pu foam 182.88x91.44cmx7.62cm each , two pillow 45.72x68.58cm each , sinhaura , bangles-24 pieces , kangan-four pieces

Certification Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector