Latest check rails Tenders | Government check rails Tenders

Central Government/Public Sector

CTN :44113465

27 Feb, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - rail 98050114 scrap rail cut pieces, including condemned and rusted narrow/meter gauge rails. the material consists of various rail sections such as 60 kg, 52 kg, 90r, and 75r, along with closer rail pieces, sej nose, fabricated rail, and double-headed rail pieces. these rails are released from structures, staging rail sections, and dismantled from sheds, fencing of platforms, and rail guides. the lot includes rusty and corroded rail pieces, check rails with or without glued joints, and m.s. attachments such as welded m.s. flanges, angles, plates, sheets, fish plates, glue joints, and sej plates. the material is of assorted sizes, broken, damaged, and unserviceable for railway use. sold on an "as is where is" basis. loading by purchaser. custodian: dms/scrap/pardi.

Central Government/Public Sector

CTN :44113467

27 Feb, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - melting 98050114 %u2013 m.s. melting scrap: m.s. melting scrap released from assorted unserviceable rolling stock, track fittings, machinery, coach and locomotive components including pivot pin cover, pick axle, crow bar claw, released p-way key, two way key, dog spike, rail clips, rail tensor, rail trolley, rail tong, fish plates, joggle plates, heavy perforated m.s. plates, m.s. plates, iron plates, steel pattis, rail trolly wheel,channel sleeper fittings, damaged channel sleeper bridge pieces, t-head bolts for channel, bolts, screws, nut bolts of mixed sizes, washers, clamps, securing bolts, cotter pins, loose jaw cotter pin, knuckle pins, supporting device, cbc supporting device, draft gear for cbc, draft gear, draft key, draft yoke, draw hook, enhanced capacity draw hook, draw bar, draw hook beam, bent coupling link, coupling rods, shaku coupler, buffer spindle, spring loaded buffer assemblies, buffer and draw gear, centre pivot foundation box, centre housing, bolster bogie base plate, bogie bolster, bogie bolster hanger, hanger block, bolster spring suspension pins, laminated springs, support springs, broken springs, leaf springs, lb spring, primary and lateral bump stops with or without rubber, emu rubber attached sandwich assemblies, brake rigging links, brake rigging icf, brake rigging levers and levels, brake cylinder assemblies, bmbc brake cylinder, bmbc body, adjusting tube bmbc, brake head, spring brake chamber, brake pads with or without rubber, brake contact assembly, traction links, traction lever, traction motor pinion parts, traction motor bearing cover, bearing shield of traction motor, end shield of traction motor, traction motor gear case assemblies, gears, small gear pieces, gear box, bearing cartridges, dismantled bearing spares with collars, phonic wheels, ctrb, equalising stay, anchor link, diagonal rod, gc bar, point gc, irs point machine slide complete set, point electric detector, junction box for point machine, signal machine parts, tws locking slide with block, e-block, base plate, face plate, face plate for buffer plunger, important elbow, channel, guide t section, parallel guide bar, sej bracket, z-bracket, heavy brackets, stiffener plate brackets, support brackets, reinforcement structure pieces, mechanical linkages, mechanical locking assemblies, supporting device body, cutter chain machine parts, pqrs machine parts, ttm machine parts including hydraulic cylinders, hydraulic jack, mechanical jack 12t/18t/25t, bottle jack, submersible piston rod, torque wrench, spanners, spanner rod, spanner plate, lifting roller, crane chain and hook, loco chain, angle hook, hook bolt, wire rope with or without aluminium crimping, wire rope sling/tow, lp-hp pantograph cylinder, lp-hp cylinder of knorr bremse compressor, lp-hp valve for knorr, westinghouse rdk valve, westinghouse combined brake unit, condenser washer, dirt collector, nrv, dv, diesel generator set parts, metco traverser parts, bcm cotter chain, poh items of bg coaches, motor coach front and rear covers, motor coach collar, icf collar, axle box front cover, centre pivot components, cattle guard, machine base, platform cabin parts, mixed engine material, mixed size bolts, double geared items, hot air gun, released plate screw, cr with common pipe bracket, melting items and other miscellaneous railway m.s. scrap, worn threaded parts, bent or corroded track fittings, damaged traction gear parts and other assorted ferrous scrap; material may contain some attached aluminium and other small non-ferrous parts, grease, oil, dirt and rust.all materials unserviceable and beyond economical repair (ber), not fit for railway use, sold on %u201cas is where is%u201d basis. loading by purchaser. custodian: dms/scrap/pardi.

Central Government/Public Sector

CTN :44113470

27 Feb, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - rail 98050114 scrap rail cut pieces, including condemned and rusted narrow/meter gauge rails. the material consists of various rail sections such as 60 kg, 52 kg, 90r, and 75r, along with closer rail pieces, sej nose, fabricated rail, and double-headed rail pieces. these rails are released from structures, staging rail sections, and dismantled from sheds, fencing of platforms, and rail guides. the lot includes rusty and corroded rail pieces, check rails with or without glued joints, and m.s. attachments such as welded m.s. flanges, angles, plates, sheets, fish plates, glue joints, and sej plates. the material is of assorted sizes, broken, damaged, and unserviceable for railway use. sold on an "as is where is" basis. loading by purchaser. custodian: dms/scrap/pardi.

Central Government/Public Sector

CTN :44112849

26 Feb, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap rails of all types with or without attachment of ci pot, cst 9 and st sleeper of sort & sizes including point & xing rails, check rails, tongue rails, v rails, wing rail, structural rail, narrow rail, with or without gluid joint, nut bolts ,fish plate, c i & other ms attachments. some loose pcs of ci pot, cst 9 and st sleeper are available in the lot , the same will also be delivered.note: 1. maximum gross weight allowed at the time of delivery is 40 mts (tolerance of 2% is allowed).2. cutting/cleaning/hammering is not allowed.location- a by 3

Central Government/Public Sector

CTN :44089090

28 Feb, 2026 7.58 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair and overhauling service - cs-5 display not responding post powering up the system. defect to be identified and rectified. suspect defective pio card, leakage of coolant observed from common rail drain plugs of various cylinders of centre main engine. injector o-rings (part no: 700429021001, 700429038003), sealing ring (part no: 0000160119) and sleeve o-rings (part no: 70042903900/ 700529039000) be replaced for 14 cylinder heads of cme. (spares cg supply).

Central Government / Public Sector

CTN :44092173

25 Feb, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12246ms26k, 98050011, quantity- 37.330 mts. scrap condemned unserviceable ms- cs mixed scrap of continuous action tamping machine[csm], tamping express, points and crossing tamping machines, multi- purpose tamper [mpt], dynamic track stabilizer [dts], ballast cleaning machines [bcm, frm], ballast regulator machine [brm], duomatic tamping machine and track laying machines consisting of traverse beams, cardon shafts, piston rods, damper wheels, tamping arm hubs, ballast screens of bcm, rail clamp discs, sq. cylinders, satellite axle support cylinder, corner roller housing, u- clamps of bcm, round shaft chisels, sprocket for bcm, roller conveyor chain, tamping arms, belt roller, wear plates, hook up- dn cylinders, plough channels, brake block shoe, brake cylinder, radiator ms scrap, tamping arms, engine spare parts ms, lining rollers, hydraulic valves, conveyor supports of frm, hydraulic lifting cylinder, ascending and descending elbow, lifting hook, tamping unit vibration damper, cutter bar, cutter chain assembly for bcm, brake blocks, tamping tines, clutch pressure plate, measuring bogie wheels, pneumatic cylinders, pneumatic valves, adaptor, filter elements, hydraulic hose fittings, bearings, bush for tamping arms, steel bush for tamping arm, bearing covers, satellite gears and pinions, slider for axle gear, running axle for csm, wing slider, gear box, distributor pump mechanical, locking device of tamping unit, cover plates, fly wheel, locking device of brake assembly, spacer ring, hex nut, bolts, stud bolts, eccentric vibration shaft, gland of lining cylinder, yoke of lining cylinder, track lubrication machines, diesel engine spares and other tamping machine scrap materials of sorts and sizes, with or without attachments. total wt- 37330 kgs approx. manganese steel- 3689.3kgs approx.ms- 33640.7kgs location- bin no- 246, left side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per mv act 1988

Private Sector

CTN :44068368

27 Feb, 2026 NA

Jhajjar - Haryana

Tender For tender for supply of gravimetric feeder spares : : -comp counter assy for mill rc feeder , pinion for 36 mot bunker gate gearbo , rail-support-weldment assy for wedge , grav fdr 36 gasket-belt take-up gf-074 , feeder inlet span rollers bearing housin

Central Government/Public Sector

CTN :44064414

24 Mar, 2026 NA

Hyderabad-T - Telangana

Tender For supply of double girder eot crane 5t/2t along with shrouded busbar&rail with mandatory spares as per annexure

Central Government/Public Sector

CTN :44040123

30 Mar, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For supply of running contract for 6400 mm curved switches with 60 e1a1 thick web tongue rails for 1in 8.5 turnout bg (1673 mm) for 60e1 rail with r260 grade on psc sleepers as per rdso drawing no. t-9775 with alteration 3 in accordance with rdso's standard drawing no.t-9774 alteration 2 and conforming to irs specification no. irs:t-10-2025 & irs:t - 62 -2025 (complete set) with latest revision/corrigendum/amendment complete with all parts listed in the sub assembly rdso drawing no. t-9775 but excluding standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e- tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arranged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings attached as annexure-c

Central Government/Public Sector

CTN :44040218

16 Mar, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For supply of running contract of 10125 mm curved switches with 60 e1a1 thick web tongue rails for 1 in 12 turnout bg (1673 mm) for 60e1 rail with r260 grade on psc sleepers as per rdso drawing no. t-8780 with alteration 4 in accordance with rdso's standard drawing no.t-8779 alteration 3 and conforming to irs specification no. irs:t-10-2025 & irs:t-62 -2025 (complete set) with latest revision/corrigendum/amendment complete with all parts listed in the sub assembly rdso drawing no. t-8780 but excluding standard fish plates, fish bolts, elastic rail clips, insulating liners/metal liners as amended up-to date of closing of e- tender. rails needed for fabrication purpose for tongue rails, stock rails and check rails will be arranged by supplier at his own cost in terms of railway board's letter no. 2022/track-1(p)/fabricators dt. 24.01.2022. list of fittings attached as annexure-c.

Check Rails Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors