Get complete information related to latest Check Rails Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Check Rails Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Check Rails Tenders.
Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of checkrails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0
Tender For manufacturing & supply of 11200 mm curved thick web switches 1 in 16 , 60 kg zu-1-60/60e1a1 thich web grade 880 class a tongue rails and uic 60 kg /r260 grade- 880 class a/b stock rails with elastic fastenings and spring operated setting device rdso t-6216 on psc sleepers to rdso drg no. t-7076 (alt.3) with latest alteration if any up to the date of tender notice, with suppliers rails, complete set with all parts as listed in the drawing including checkrails, cgrsp, but excluding the gfn liners, erc, plate screws, fish plates and fish bolts & nuts, conforming to irs -t-10-2023 specification with latest alteration as amended up to the date of tender notice.
Tender For corrigendum : procurement of 01 no. lp turbine rotor and 01 no. lp turbine inner-inner casing along with complete guide blades for 250 mw kwu turbine of unit no. 10 and 11 of ph-iv, stps, sarni. mppgcl
Tender For corrigendum : procurement of hpt inner casing with nozzle assy _pooled spare_ of lmzmake turbine k_660_247 for stage_i_3x660mw_ unit at ntpc barh.
Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs, glued joints, dowels & broken screw spikes, renewal of turnout sleepers, deep screening of points & crossings, casual renewal of p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of checkrails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of senior section engineer/p.way(in-charge)/champa of bilaspur division.
Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs & glued joints, renewal of turnout sleepers, deep screening of points & crossings to avoid mud pumping by t-28/bcm, deep screening of coal choked yard lines and mid-section lengths to avoid mud pumping, casual renewal of broken sleepers, p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of checkrails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of senior section engineer/p.way(in-charge)/raigarh of bilaspur division.
Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs, glued joints, dowel & broken screw spikes, renewal of turnout sleepers, deep screening of points & crossings, deep screening of coal choked yard lines and mid-section lengths to avoid mud pumping, casual renewal of p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of checkrails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of assistant divisional engineer/brajrajnagar of bilaspur division.
Tender For fabrication and supply of 10125 mm curved thick web switches with zu-1-60/60e1a1, grade 880, class a, prime quality tongue rails and 60kg (uic)/60e1 grade 880/ r-260 class a/b prime quality stock rails and checkrails with elastic fasteners and spring operated setting device to rdso drg. no t-6216 alt. 5 for 1 in12, bg 60kg turnouts for fan shaped layouts on psc sleepers with all fittin gs as per layout no.t-6155 alt. 13 and t-6155/1 alt. 8 in accordance with rdso standard layout drg. no.t-6154 alt. 9 complete with fittings as per fittings list attached excluding standard fish plates, fish bolts and nuts, ercs, insulating liners/metal liners and psc sleepers. (conforming to specification: ir s -t -10-2025, t -62 -2025, t-12-2009 and str: tdg0038, rev.0 ) n.b:stock rail, check rail and asym metrical zu rails for tongue rail required for this item will be arranged by vendor at their own cost vid e railway bd.'s letter no.2022/track-i(p)/fabricators dt. 24.01.2022. [ warranty period: 30 months af ter the date of delivery ]
Tender For corrigendum : supply of 10125 mm curved switches with zu-1-60 / 60e1a1 thick web grade 880 class a tongue r ails and uic 60 kg/m grade-880, class a/b stock rails with elastic fasteners and spring operated setting device (rdso-t/6216 read along with alterations), complete with all fittings for 1 in 12, bg 60 kg turno ut for fan shaped layout on psc sleepers i.e. all fittings for switch portion as per sub assembly drg. no. rdso/t-6155 (read along with latest alterations) in accordance with rdso standard drawing no.t-6154 (read along with latest alterations) excluding standard fish plates, fish bolts and nuts, er clips & insulat ing liners, conforming to spn: t-10-2023, with latest alteration/corrigendum if any as amended upto dat e of closing of tender. the list of fittings as per annexure-c. any additional or modification to the list of fittings issued by rdso in subsequent alteration up to the date of closing of tender is also to be supplie d by firm for which no additional payment would be made. note:- asymmetrical zu rails for tongue rails as well as rail for stock rails & checkrails shall be arranged by vendor at his own cost. the quoted rate shall be all inclusive of above. [ warranty period: 30 months after the date of delivery ]
Tender For work contract for supply and application of pad/quilt type ceramic fibre pad/blanket insulation on bhel make kwu design 600 mw hp turbine casing and associated stop valves and control valves at 2x600 mw, sstpp, mppgcl, dongalia.