Latest clay Tenders | Government clay Tenders

Central Government/Public Sector

CTN :45419908

15 Jun, 2026 NA

Sundergarh - Odisha

Tender For supply of clay gun scrapper ring assy, pd/r-230425 , piston rings, dwn: pd/r-230425, pn: 2&3 , scrapper ring, dwn: pd/r-230425, pn: 5

CTN :45432402

15 Jun, 2026 NA

East Khasi Hills - Meghalaya

Tender For supply of pbs roll terflet 1m wide and 20m long , pvc service tank 1000 ltrs cap sintax , super flash strip bitumen tape size 2 inch , float valve 15mm plastic prayag , pvc laminated gypsum board size 600mmx600x6mm , armstrong mineral fiber acoustical ceiling board 600x600x18 mm tiles , pvc service tank 500 ltr sintax , float valve 20mm plastic prayag , coarse aggregate 12.5mm graded , silicone sealant with gun clean colour , gi tee 1.5inch 15mm , e- board ceiling 4mm thick size 600x600mm , gi tank nipple 15 mm x 300 mm long , pvc pipe 50 mm dia length 3 mtr , tank cover 1000 ltr , pvc pipe 75 mm dia length 3 mtr , pvc pipe 100 mm dia length 3 mtr , gi nipple dia 15 mm dia 150 mm length , rotary hammer masonary drill bit set of 3 pcs 25mm, 30mm and 40mm , m seal water based , brush for paint 6 inch , cement in 50 kg pack , pgi sheet 22 gauge , screw wood 25 mm 100 nos per pkt , elbow pvc 75 mm dia , synthetic resign adhesive fevicol , drill bit for wood work complete 3 pieces 4mm, 6mm and 8mm , gi socket 15 mm dia , drill bit for iron5 pieces 4mm, 6mm, 8mm,10mm and 12mm , screw wood 15 mm , tank cover 500 ltr , drill bit for concrete set of 5 pcs , gi elbow 1.5 inch 15mm , screw wood 35 mm , white cement in 1 kg pkt , gi uniion 1.5inch 15mm , elbow pvc 100 mm dia , screw wood 20 mm , brush for paint 4inch , elbow pvc 50 mm dia , vaccum cleaner blockage cleaner rubber type , gi nipple 15 x 50 mm long , gi nipple 15 mm x 100 mm , coarse aggregate 20mm graded , sand , gi tank nipple 15mm , screw wood 25 mm , screw wood 40 mm , screw wood 75 oblique 80 mm , gi socket 20 mm dia , termite killer 500 ml container , brush for paint 2inch , nails wire 2inch 50 mm , nails wire 1.5 inch 40 mm , nails wire 4 inch 100 mm , nails wire 3inch 80 mm , nails wire 1inch 25 mm , panel pin 1 x 17 mm , hack saw blade , brush for paint 1inch , gi plug 20mm , lime , emery sheet abb cloth no 80 , gi nipple 15 mm x 75 mm , nails wire 2.5 inch 60 mm , dr fixit water proofing liquid 101 lwt , gi tank nipple 20mm , nails 5inch , nails 6inch , gi plug 15mm , urinal flat back 390 x 375 x 590mm parryware , brass sliding bolt 300mm , gi wire mesh 0.63 mm dia 15mtr each roll 1.40 mm apreture , pvc waste pipe 32mm for sink 900mm long , brass bow handle 150mm //bid details 2 / 60

CTN :45408306

12 Jun, 2026 9.44 Lacs

Imphal - Manipur

Tender For supply of portland pozzolana cement , coarse sand , coarse aggregate , bricks sub , self tapping screws , ms square , hdpe sand , plywood commercial , app water , ceiling fan , synthetic enamel paint , pvc sheathed , thinner , distemper oil , painting brush 100mm , painting brush 75mm , pvc elbow 110mm , pvc elbow 75mm , pvc socket 110mm , ppr socket 20mm , ppr socket 25mm , ppr tee 25mm , ppr reducer , ppr tee 20mm , wooden scatling , nails 1 inch , hinges for , aldrop comp , ppgi sheet , self tapping screw , mild steel round , change over switch , pvc insulated , four layer hdpe , led tube , led bulb , ppr pipe , ppr elbow 25mm , ppr elbow 20mm , male threated socket , female threated socket , binding wire , non skid , metal cutter disc , metal cutting disc , welding rod , mild steel , acrylic sheet , male threated elbow , female threated elbow , pvc nahani trap , plastic tarpaulin , pvc waste , hand gloves

CTN :45438356

29 Jun, 2026 NA

Delhi - Delhi

Tender For supply of portland pozzalana cement grade 43 , coarse sand zone iii , stone aggregate single size 10 mm nominal size , stone aggregate single size 20 mm nominal size , fine sand zone iv , twisted steel deformed bars , common burnt clay fps non modular bricks class designation 7.5 , wall form panel for shuttering , structurals steel such as tees,angles channels, angle iron frame and ms flat , 12 mm thick marine plywood conforming to is 710 , mild steel sheets of 1.00 mm thickness , rcc pipes np2 class 900 mm dia , length 2.50 mtr

Central Government/Public Sector

CTN :44982581

06 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For bid to ras corrigendum : supply of plastic fire clay(lumps) size: 0-200mm

State Government

CTN :45439133

17 Jun, 2026 7.52 Lacs

Malda - West Bengal

Tender For desludging clay/sand/silt from lagoon no. 2 of mathurapur wtp of manikchak dev. block under malda arsenic area w/s division phe dte.

State Government

CTN :45439135

17 Jun, 2026 7.52 Lacs

Malda - West Bengal

Tender For desludging clay/sand/silt from lagoon no. 1 of mathurapur wtp of manikchak dev. block under malda arsenic area w/s division phe dte.

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

State Government

CTN :45411968

24 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm thick factory ma

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

Clay Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government