Latest clean agent system Tenders | Government clean agent system Tenders

corporations/Associations/Others

CTN :45667085

29 Jun, 2026 NA

Faridabad - Haryana

Tender For fire work at esic haryana. - (a) supplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required :(b) horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp squirrel cage induction motor, tefc, synchronous speed 1500 rpm, suitable for operation on 415 volts, 3 phase 50 hz, ac supply with ip 55 protection for enclosure, horizontal foot mounted typewith class-f insulation, conforming to is-325.(d) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plasteredwith anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required:(diesel driven pump)(b) horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulatedwith 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event offault with audio indications, painted with post office red colour etc. as required.(d) m.s fabricated, common base plate, coupling, couplingguard, foundation bolts etc. as required.(e)suitable cement concrete foundation duly plasteredand with anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (jockey pump)(b)horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is : 1520.(c) suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class-f insulation, conforming to is : 325.(d) m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plastered and with anti vibration pads., 180 lpm @70m head, fabrication, supply, insallation testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required :, incomings630a, 50ka 4 pole mccb, ics=100% icu rating digital voltmeter 0-500v with selector switch ammeter (0-630 a) with selector swtich & cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 800amps outgoings (note : all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps)main fire pump200 amp, 50ka tpn mccb, ics=100% icu, with f

CTN :45419374

26 Jun, 2026 NA

Dantewada - Chhattisgarh

Tender For corrigendum : supply of computer , stock register , microwave , refrigerator , packing material for storage , sample reports , juicer mixer , basic knives set , weighing scale , measuring spoons and cups , bowls , scales , whisker , rolling pin , spoons , measuring spoons and jugs , sieves and relevant tools , fitments , hot cabinet , serveries , cleaning and sanitizing equipment , sample of escalation matrix , organisation structure , handouts of ipr guidelines , safety glasses , head protection , rubber gloves , safety footwear , warning signs and tapes , fire extinguisher , first aid kit , different types of linen , tableware , cutlery , crockery , napkin , table , chair , sample feedback form , bill book , card swiping machine , glassware , whiteboard , flip chart , duster , projector , projector screen , laptop , training kit , participant handbook and sops , markers , chalk box , electric induction , lpg cylinder , work station , tandoor , oven , deep fat fryer , kitchen work table , kitchen rack , dry storage cabinet , exhaust and fresh air fans , fly killer , steel stock pot , steel sauce pan , steel omelet pan , iron work , piping bags , slicer , whisk , muffins mould , tartlet mould , pie mould , bread mould , chopping board , steel skimmer , steel turner , steel ladle , steel rice colander , steel strainer , caramel custard mould , baking tray , ss storage tray , rotary cake stand , plastic crates , tandoor seekhs , parat , pizza cutter , ss katoris , tawa with handle , masala box , ac * /bid number : gem/2026/b/7600742 + /dated: 03-06-2026 ' ' / bid document 1 / 67

CTN :45575174

01 Jul, 2026 2.20 Lacs

Coimbatore - Tamil Nadu

Tender For supply of lab equipments for fire technology and safety engg. dept. - list of items:supply oflab equipments (for specification details refer notice inviting tender), respiratory protection equipment (detailed specification enclosed), hand skin protection equipment(chemical resistant gloves)(detailed specification enclosed), eye protection equipment(safety goggles) (detailed specification enclosed), protective clothing (lab coats demonstration purpose) (detailed specification enclosed), multi gas detector (detailed specification enclosed), chemical safety and eye wash shower (detailed specification enclosed), eye wash cup (detailed specification enclosed), friction sensitiveness tester (detailed specification enclosed), first aid box (detailed specification enclosed), first aid dressing kit bandages andslings (detailed specification enclosed), first aid blanket / emergencyblanket (detailed specification enclosed), patient transport chair (detailed specification enclosed), cpr training manikin (adult) (detailed specification enclosed), personal protective equipments (detailed specification enclosed), respiratory ppe (detailed specification enclosed), scba self contained breathingapparatus (detailed specification enclosed), safety harness (full body harness) (detailed specification enclosed)

State Government

CTN :45315676

29 Jun, 2026 13.77 Crore

Bengaluru - Karnataka

Tender For corrigendum : establishing 2x12.5 mva, 66/11kv sub-station at kalathmadu along with construction of proposed 66kv lilo line from the existing 66kv virajapete- ponnampete sc line on dc towers to proposed 66/11kv sub station at kalathmadu for a distance of 1.925km in virajpete taluk, kodagu district on partial turnkey basis including supply of all matching materials/equipments (excluding supply of 2x12.5mva 66/11kv power transformers and 11 kv switchgear) and erection (including civil works) of all materials/equipments, testing and commissioning - on load tap changer , control and relay panels, , circuit breakers, , 11kv mcvcbs & pcvcbs, , tower parts and all types of station structures with bolts, nuts and washers, , i beams & m.s channels, , lightning arrestors, , isolators, , insulators, , instrument transformers, , battery sets, , battery charger, , acsr conductors, , ground wire, , 11kv ug cable, , 1.1kv copper control cables & lt power cables, , capacitor bank, , hardware for insulator, conductor and ground wire:, , tension & suspension clamps and connectors., , accessories for conductor and ground wire:, , p.g clamps. m.s.c joints, pre-formed rods, repair sleeves, vibration damper etc., , c-type fire wedge connectors, , i) grounding materials (g.i flat, m.s flat etc.,), , il)grounding materials (c.i pipes), , ltac & dcdb panel, , 11kv termination & jointing kits, , class, , nitrogen injection fire protection, , system, , rigid tubular aluminium bus bars, aluminium clamps and connectors., , wave traps/line traps, , plcc equipment

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45476667

22 Jun, 2026 NA

Paradip - Odisha

Tender For fire extinguishers maintenanceincluding clean agent system at paradeep installation

CTN :45033220

11 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For corrigendum : supply of extension of existing clean agent system,clean agent system, including gst , site work price as per item sl. no. 02.001 of mr, including gst , transportation charges as per item sl. no. 03.001 of mr, including gst , mandatory spares price per item sl. no. 04.001 of mr, including gst , supply price for item sr. no. 01.002 of mr, on fot despatch point basis, including gst , site work price as per item sl. no. 02.002 of mr, including gst , transportation charges as per item sl. no. 03.002 of mr, including gst , mandatory spares price per item sl. no. 04.002 of mr, including gst , supply price for item sr. no. 01.003 of mr, on fot despatch point basis, including gst , site work price as per item sl. no. 02.003 of mr, including gst , transportation charges as per item sl. no. 03.003 of mr, including gst , mandatory spares price per item sl. no. 04.003 of mr, including gst

Central Government/Public Sector

CTN :45454363

15 Jun, 2026 NA

Kalka - Haryana

Tender For supply of aluminized leg guard 16 inch long.specification:-1)radiant ,fire and molten metal splash protection upto 1100 degree c. 2)size=16 inch long. 3)material =aluminized. reference:(a)''guide for selection of industrial safety equipment for body protection reaffirmed (1991)'',is:8519-1977. (b)''goi aerb safety guidelines [ warranty period: 12 months after the date of delivery ] ]

CTN :44915042

05 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras bid to ras bid to ras corrigendum : providing of custom bid for services - camc for maintenance of clean agent systems

CTN :45136442

04 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For "upgradation of underground fire hydrant pipe line, co2 gas suppression system, clean agent system and fire detection & alarm system of working condition and training of all system in fwp plant, operation & annual maintenance contract of fire detection & alarm system & co2 gas suppression system, clean agent system, automatic sprinkler spray (mvws /hvws) system and hiring of multipurpose fire tender along with dcpo in 3-shifts round the clock 24x7 of factory area at fwp for 03 years as per scope of work.".

Clean Agent System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector