Latest cleats Tenders | Government cleats Tenders

Central Government/Public Sector

CTN :45735779

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of horizontal damper bracket, as per drawing: 1267541 ver. 01 and specification no. en1.0570;10025/29;mdts 166 rev. 1 or latest, packing instruction: suitably packed in jute bags [ warranty period: 30 months after the date of delivery ] ]

CTN :45627328

03 Jul, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of washer for dt car bogie replacement of rs-2 a) plain washer for centre pivot-08 nos. 20-200hv-st-a3c- iso 7089 bt part no. = 100104369 b) plain washer for lateral damper & earth return cable -08+02 =10 nos. 12-200hv-st-a3c- iso 7089 bt part no. =100104367 c) conical spring washer for vertical damper mount-08 nos. ""fst 12 din 6796 bt part no. =100001109 d) conical spring washer for anti roll bar body bracket-08 nos. 16-fst-a3c, din 6796 bt part no. =100104405 e) conical spring washer for speed sensor on axle box-04 nos. ""8-fst- a3c, din 6796 bt part no. =100001107 f) plain washer for bogie to coach earth cable-02nos. 10-200hv-st-a3c. iso 7089 bt part no. =100104366 g) strain washer for bogie to coach earth cable-02nos. m10 as per sample h) plain washer for apc reciever/atp antenna cable, atp odometer cable, cleat for bogie to axle earth cable-30+8+1=39 nos.8-200hv-st-a2c. iso 7089 bt part no. =100104365 make:- bufab, vardhman industrial fasteners, lps bossard pvt. ltd. , shaildeep engineering private limited, etc. ]

CTN :45743835

03 Jul, 2026 NA

Delhi - Delhi

Tender For supply of washer for dt car bogie replacement of rs-2 a) plain washer for centre pivot-08 nos. 20-200hv-st-a3c- iso 7089 bt part no. = 100104369 b) plain washer for lateral damper & earth return cable -08+02 =10 nos. 12-200hv-st-a3c- iso 7089 bt part no. =100104367 c) conical spring washer for vertical damper mount-08 nos. ""fst 12 din 6796 bt part no. =100001109 d) conical spring washer for anti roll bar body bracket-08 nos. 16-fst-a3c, din 6796 bt part no. =100104405 e) conical spring washer for speed sensor on axle box-04 nos. ""8-fst- a3c, din 6796 bt part no. =100001107 f) plain washer for bogie to coach earth cable-02nos. 10-200hv-st-a3c. iso 7089 bt part no. =100104366 g) strain washer for bogie to coach earth cable-02nos. m10 as per sample h) plain washer for apc reciever/atp antenna cable, atp odometer cable, cleat for bogie to axle earth cable-30+8+1=39 nos.8-200hv-st-a2c. iso 7089 bt part no. =100104365 make:- bufab, vardhman industrial fasteners, lps bossard pvt. ltd. , shaildeep engineering private limited, etc. ]

CTN :45733156

08 Jul, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no. sse/cs/2026-27/17, srl no.[1] miscellaneousllaneous ferrous material (released hanger brackets, damper, bracket,.. etc.), wt-860 kgs, srl no.[2] miscellaneousllaneous ferrous material (frame, plate,¿. etc.) wt-5000 kgs, approx. total ferrous weight-5860 kgs.

CTN :45727829

13 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of srbgf cable cleats consisting of 16 items for wag-7 loco as per clw's drg. no. clw/3w/9009.207/c and clw/es/c-53 (alt-a). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45713293

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of lateral damper bracket for fiat bogie with air spring to rcf's drg no-lw05117, alt. a or latest. materials and specification: as per drawing. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45727737

27 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of damper bracket asm lower (dlw pt.no.17021108) drg.no. emd pt. no. 40089920 ,dlw drg.no.40089920 alt e ]

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Central Government And Public Sector

CTN :45681300

07 Jul, 2026 NA

Sonitpur - Assam

Tender For supply of set of bracket. one set consisting of two items: (1). bracket for lateral damper in lhb bogie as per drawing no. lw05116 alt-nil or latest material spec: as per drawing (2), bracket for lateral damperin lhb bogie as per drawing no. lw05117 alt- nil or latest. material spec: as per drawing [ warrantyperiod: 30 months after the date of delivery ] ]

CTN :45696784

06 Jul, 2026 10.00 Lacs

Kuchaman - Rajasthan

Tender For digital library in shree kuchaman pustakalay. kuchaman city - computer system setup (includes cpu, monitor, keyboard, mouse and accessories) cpuintel core i5- 08th gen processor with activated windows having 8 gb ram, 512 gb ssd, 450w power supplymonitor18" led 45 htz display having hdmi and vga portmouse and keyboardwired optical mouse and wired full numerical pyhysical keyboard(made of dell/lenovo/hp/asus), furniture counter (including table and chair) per personcounter: comfortable size for 20 persons having 32" heightchair: adjustable height wheel movable chair, air conditioners, split acs 1.5 tonwith installation and stabilizer(made of voltas/lg/samsung/lloyd), wi-fi router and internet connectionmulti network wi-fi router having high internet speed minimum 300 mbps, providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in-charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to is: 2095-part i,, brick work with modular fly ash lime bricks (falg bricks) conforming to is:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in : cement mortar 1:6 (1 cement : 6 coarse sand), cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand), distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer., providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, p & f 1st quality heavy duty vitrified polished digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm x 1200 mm, providing and fixing fully panelled /partly panelled double leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per annexure a and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide

Cleats Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector