Latest clutch wire scrap Tenders | Government clutch wire scrap Tenders

corporations/Associations/Others

CTN :41022398

23 Jul, 2025 NA

Gwalior - Madhya Pradesh

Tender For auction sale of miscellaneous iron steel scrap,aluminium winding wire scrap,aluminium cable scrap,315kva 11/.4kv transformer without oil copper wound un-economical/scrap,500 kva 11/.4kv transformer without oil copper wound un-economical/scrap,200 kva 11/.4kv transformer without oil al. wound un-economical/scrap

State Government

CTN :40998627

17 Jul, 2025 NA

Manaparai - Tamil Nadu

Tender For sale of waste and scrap of gi coated ms wire from tnpl unit 2 on one time sale / as is where is basis

CTN :40633387

15 Jul, 2025 3.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : daiviya apda work under edsd- rura - carriage of various size pcc poles from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of various size st poles (9 mtr /11mtr/ 13mtr ) from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of line material viz. weasel/rabbit/racoon /dog conductor, g.i. earth wire, cross arm, angle, channel, cable boxes, static meter insulators, clamps and other line material from store center or from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., erection of p.c.c double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c double pole the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of p.c.c single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p double pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., renozzling of damaged stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work., dismentling of rusted weasal/racoon /dog conductor wire and g.i wire & safe carriage of scrap material back to store as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., laying, sagging, stringing, binding and jumpering etc. of weasal/dog/rabbit conductor in new erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for prope

corporations/Associations/Others

CTN :41008442

14 Jul, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of m.s. steel meltable,11 kv x-arm scrap,33 kv tpmokg,steel scrap r,s, joist,steel gi/gs wire scrap/earth wire scrap,tf tank scrap

corporations/Associations/Others

CTN :41008457

14 Jul, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of steel gi/gs wire scrap/earth wire scrap,transformers tanks scrap,empty oil drum 205/209/210 ltr. scrap,aluminium cable (armoured) scrap

corporations/Associations/Others

CTN :40948701

18 Jul, 2025 NA

Jammu - Jammu And Kashmir

Tender For auction sale of ms scrap as per annexure,gi scrap,tin scrap,aluminium scrap,plastic scrap as per annex-2,220kv cvt,400kv cvt,split ac outdoor unit (odu),split ac indoor unit (idu),window ac,empty oil drums,electronic scrap etc as per lot annexure,brass scrap,empty n2 gas cylinders-08 nos.,hydraulic oil,216kv porcelain lightning arrester stacks,390kv porcelain lightning arrester stacks,12v 26ah battery,12v 150ah battery,gate valve (gun metal) (150nb),compaction machine with motor,oil filled heater,portable dg set, 7kva, kirloskar make,tower materials,conductors (moose),conductor (zebra),opgw cable,disc insulators (160kn),earth wire

corporations/Associations/Others

CTN :40948746

18 Jul, 2025 NA

Alappuzha - Kerala

Tender For auction sale of battery items,insulated copper cables wire scrap,electrical items,electronics items,miscellaneous items,ug-copper cables (pijf)

CTN :40939325

23 Jul, 2025 18.00 Lacs

Baramulla - Jammu And Kashmir

Tender For pddss2526100210 rebuilding of damaged dts through divisional workshop for ed baramulla - dpc aluminium wire of sizes (12, 14, 16, 17, 18, 19, 21, 22 etc.) swg conforming to relevant is against equal quantity of scrap, dpc copper wire of sizes (12, 14, 16, 17, 18, 19, 21, 22 etc.) swg conforming to relevant is against equal quantity of scrap, bush rods lt 12 mm brass, bush rods lt 16 mm brass, bush rods lt 19 mm brass, bush rods lt 20 mm brass, card board of sizes, ht brown paper (3 mill, 2.5 mill), lethoride paper 10 mil, 20 mil, cotton tape (1" width, 35 m long) (1 roll=10 no.), rubberized cork sheet 4 mm thick 2ftx3ft, bakelite tube of sizes, glass wool ampere sleaves of sizes, workshop tool kit containing 1/2 inch drive socket accessories: heavy duty ratchet, 75, 125 & 250 mm extensions, universal joint, flex bar 1/2 inch drive spark plug sockets: 5/8 & 13/16 inch 1/2 inch drive standard sockets: metric: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32 mm a/f: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4 inch 1/4 inch drive socket accessories: heavy duty ratchet, 50 & 150 mm extensions, universal joint, socket driver, bit holder 1/4 inch drive standard sockets: metric: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm a/f: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8 inch 152 mm diagonal cutting pliers 152 mm long nose pliers 178 mm combination pliers 33 assorted 1/4 inch bits, screwdriver, hex & torx adjustable wrench: 300 mm combination spanners: metric: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm a/f: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 inch hex key set - long ball type: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm screwdrivers: slotted 5x100 mm, 6x150 mm, 1x100mm, 2x150mm, welding rods, body solder (bombay masala), card board cutter (manual), transformer oil of relevant make, surf excel soap (cake type), dhoti cloth, oil pump [manual], floor wipers, 1/2 inch bi-hexagonal square drive socket set, [8mm to 40 mm] of reputed make (sample to be aprroved before supply), hammer (plastic), " electric impact wrench (8mm-40mm) socket kit of reputed make (sample to be aprroved before supply)

corporations/Associations/Others

CTN :40933766

15 Jul, 2025 NA

Mysore - Karnataka

Tender For auction sale of ms scrap of condemned /damanged bh40 equipment items,m s melting scrap,m s turning boring scrap,c i boring m s turning boring,scrap of c.i boring/m.s. turning & boring(mixed with mud),scrap of rubber items,scrap of m.s. flame cutting slag,hoop of iron baleputty scrap,scrap of cond/obsolete/used/rej field returned/damaged radiators & oil coolers,scrap of cond/un-serviceable/rej/obsolete operator seats of various eqpt models,scrap of cond/obsolete/used/rej/damaged/wornout eqpt /project tyres,m s scrap of miscellaneous items consisting of waste formed plates,scrap of used welding coil spools,scrap of used cond rejd and unserviceable voltas diesel forklift,scrap of used cond rej and unserviceable godrej diesel forklift,scrap of used, cond, rejd and unserviceable voltas diesel forklift,scrap of cond/damaged/used/unserviceable/rej air compressor,scrap of cond /damaged/rejected/unserviceable conventional,scrap of protective covers guards,scrap of used, rej, cond, damaged and worn-out grinding wheels,scrap of cond field returned bearings associated with/without gear assemblies,scrap of used cond damaged rej unserviceable steel wire ropes and chain links,scrap of used cond rej and unserviceable lead acid batteries dry batteries,scrap of electrical items,scrap of cond/ damaged/rejected production equipment parts,m s scrap of used discarded engine,scrapped cabins,m s scrap of used rejected cond fabricated items,scrap of cond damaged used or rejected un-serviceable field returned items,scrap of old dead wood,scrap of used oil,scrap of used empty plastic oil barrels,scrap of used empty ms grease barrels

corporations/Associations/Others

CTN :40934213

15 Jul, 2025 NA

Trivandrum - Kerala

Tender For auction sale of unserviceable power steering box assembly,steel scrap (unserviceable king pins, shackle pins, ?etc),unserviceable joint cup & cross parts,unserviceable gearbox volvo,unserviceable cylinder liners,unservieceable fire extinguser,unserviceable aluminium radiators &inter coolers,unserviceable diesel tanks, air tanks,unserviceable rear axle tube ,ft axle,drag link and tie rod end,unserviceable hydraulic bottle jack,unserviceable a.c electrical cables (alluminium),unserviceable volvo ac blower motor assy.,unserviceable engine volvo assay,turning waste (ms,steel,cast iron.etc ),unserviceable crown wheels ll &tata,unserviceable crown assy parts,rotor (copper with iron),unservicable welding machine,empty iron barrels -210 ltrs (oil & grease),srapped copper wire and strips,unservicable joint bracket, with or with out rubber boot with bearing

Clutch Wire Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors